Discover insights from thousands of peer-reviewed papers on microbial electrochemical systems
ACS Sustainable Chemistry & Engineering · 2015
© 2015 American Chemical Society. Methane is the primary end product from cathodic current in microbial electrolysis cells (MECs) in the absence of methanogenic inhibitors, but little is known about the archaeal communities that develop in these systems. MECs containing cathodes made from different materials (carbon brushes, or plain graphite blocks or blocks coated with carbon black and platinum, stainless steel, nickel, ferrihydrite, magnetite, iron sulfide, or molybdenum disulfide) were inoculated with anaerobic digester sludge and acclimated at a set potential of -600 mV (versus a standard hydrogen electrode). The archaeal communities on all cathodes, except those coated with platinum, were predominated by Methanobacterium (median 97% of archaea). Cathodes with platinum contained mainly archaea most similar to Methanobrevibacter. Neither of these methanogens were abundant (<0.1% of archaea) in the inoculum, and therefore their high abundance on the cathode resulted from selective enrichment. In contrast, bacterial communities on the cathode were more diverse, containing primarily δ-Proteobacteria (41% of bacteria). The lack of a consistent bacterial genus on the cathodes indicated that there was no similarly selective enrichment of bacteria on the cathode. These results suggest that the genus Methanobacterium was primarily responsible for methane production in MECs when cathodes lack efficient catalysts for hydrogen gas evolution. (Figure Presented).
Biotechnology and Bioengineering · 2015
Electroactive biofilms play essential roles in determining the power output of microbial fuel cells (MFCs). To engineer the electroactive biofilm formation of Shewanella oneidensis MR-1, a model exoelectrogen, we herein heterologously overexpressed a c-di-GMP biosynthesis gene ydeH in S. oneidensis MR-1, constructing a mutant strain in which the expression of ydeH is under the control of IPTG-inducible promoter, and a strain in which ydeH is under the control of a constitutive promoter. Such engineered Shewanella strains had significantly enhanced biofilm formation and bioelectricity generation. The MFCs inoculated with these engineered strains accomplished a maximum power density of 167.6 ± 3.6 mW/m(2) , which was ∼ 2.8 times of that achieved by the wild-type MR-1 (61.0 ± 1.9 mW/m(2) ). In addition, the engineered strains in the bioelectrochemical system at poised potential of 0.2 V vs. saturated calomel electrode (SCE) generated a stable current density of 1100 mA/m(2) , ∼ 3.4 times of that by wild-type MR-1 (320 mA/m(2) ).
Environmental Science & Technology · 2015
Bioelectrochemical systems (BESs) have been shown to be useful in removing individual metals from solutions, but effective treatment of electroplating and mining wastewaters requires simultaneous removal of several metals in a single system. To develop multiple-reactor BESs for metals removal, biocathodes were first individually acclimated to three different metals using microbial fuel cells with Cr(VI) or Cu(II) as these metals have relatively high redox potentials, and microbial electrolysis cells for reducing Cd(II) as this metal has a more negative redox potential. The BESs were then acclimated to low concentrations of a mixture of metals, followed by more elevated concentrations. This procedure resulted in complete and selective metal reduction at rates of 1.24 ± 0.01 mg/L-h for Cr(VI), 1.07 ± 0.01 mg/L-h for Cu(II), and 0.98 ± 0.01 mg/L-h for Cd(II). These reduction rates were larger than the no adaptive controls by factors of 2.5 for Cr(VI), 2.9 for Cu(II), and 3.6 for Cd(II). This adaptive procedure produced less diverse microbial communities and changes in the microbial communities at the phylum and genus levels. These results demonstrated that bacterial communities can adaptively evolve to utilize solutions containing mixtures of metals, providing a strategy for remediating wastewaters containing Cr(VI), Cu(II), and Cd(II).
Ultrasonics Sonochemistry · 2021
Antibiotic residues in water are general health and environmental risks due to the antibiotic-resistance phenomenon. Sonication has been included among the advanced oxidation processes (AOPs) used to remove recalcitrant contaminants in aquatic environments. Sonochemical processes have shown substantial advantages, including cleanliness, safety, energy savings and either negligible or no secondary pollution. This review provides a wide overview of the different protocols and degradation mechanisms for antibiotics that either use sonication alone or in hybrid processes, such as sonication with catalysts, Fenton and Fenton-like processes, photolysis, ozonation, etc.
PLoS ONE · 2015
A total of 98 previously characterized and serotyped L. monocytogenes strains, comprising 32 of 1/2a; 20 of 1/2b and 46 of 4b serotype, from clinical and food sources were studied for their capability to form a biofilm. The microtiter plate assay revealed 62 (63.26%) strains as weak, 27 (27.55%) strains as moderate, and 9 (9.18%) strains as strong biofilm formers. Among the strong biofilm formers, 6 strains were of serotype 1/2a and 3 strains were of serotype 1/2b. None of the strain from 4b serotype exhibited strong biofilm formation. No firm correlation (p = 0.015) was noticed between any serotype and respective biofilm formation ability. Electron microscopic studies showed that strong biofilm forming isolates could synthesize a biofilm within 24 h on surfaces important in food industries such as stainless steel, ceramic tiles, high-density polyethylene plastics, polyvinyl chloride pipes, and glass. Cell enumeration of strong, moderate, and weak biofilm was performed to determine if the number of cells correlated with the biofilm-forming capabilities of the isolates. Strong, moderate, and weak biofilm showed 570±127× 103 cells/cm2, 33±26× 103 cells/cm2, 5±3× 103 cells/cm2, respectively, indicating that the number of cells was directly proportional to the strength of the biofilm. The hydrophobicity index (HI) analysis revealed higher hydrophobicity with an increased biofilm formation. Fatty acid methyl esterase analysis revealed the amount of certain fatty acids such as iso-C15:0, anteiso-C15:0, and anteiso-C17:0 fatty acids correlated with the biofilm-forming capability of L. monocytogenes. This study showed that different strains of L. monocytogenes form biofilm of different intensities which did not completely correlate with their serotype; however, it correlated with the number of cells, hydrophobicity, and amount of certain fatty acids.
Nature Catalysis · 2022
Energies · 2021
Metal–air batteries are a promising technology that could be used in several applications, from portable devices to large-scale energy storage applications. This work is a comprehensive review of the recent progress made in metal-air batteries MABs. It covers the theoretical considerations and mechanisms of MABs, electrochemical performance, and the progress made in the development of different structures of MABs. The operational concepts and recent developments in MABs are thoroughly discussed, with a particular focus on innovative materials design and cell structures. The classical research on traditional MABs was chosen and contrasted with metal–air flow systems, demonstrating the merits associated with the latter in terms of achieving higher energy density and efficiency, along with stability. Furthermore, the recent applications of MABs were discussed. Finally, a broad overview of challenges/opportunities and potential directions for commercializing this technology is carefully discussed. The primary focus of this investigation is to present a concise summary and to establish future directions in the development of MABs from traditional static to advanced flow technologies. A systematic analysis of this subject from a material and chemistry standpoint is presented as well.
Molecules · 2019
Environmental pressures caused by population growth and consumerism require the development of resource recovery from waste, hence a circular economy approach. The production of chemicals and fuels from organic waste using mixed microbial cultures (MMC) has become promising. MMC use the synergy of bio-catalytic activities from different microorganisms to transform complex organic feedstock, such as by-products from food production and food waste. In the absence of oxygen, the feedstock can be converted into biogas through the established anaerobic digestion (AD) approach. The potential of MMC has shifted to production of intermediate AD compounds as precursors for renewable chemicals. A particular set of anaerobic pathways in MMC fermentation, known as chain elongation, can occur under specific conditions producing medium chain carboxylic acids (MCCAs) with higher value than biogas and broader applicability. This review introduces the chain elongation pathway and other bio-reactions occurring during MMC fermentation. We present an overview of the complex feedstocks used, and pinpoint the main operational parameters for MCCAs production such as temperature, pH, loading rates, inoculum, head space composition, and reactor design. The review evaluates the key findings of MCCA production using MMC, and concludes by identifying critical research targets to drive forward this promising technology as a valorisation method for complex organic waste.
Biotechnology and Bioengineering · 2015
Extracellular electron transfer pathways allow certain bacteria to transfer energy between intracellular chemical energy stores and extracellular solids through redox reactions. Microorganisms containing these pathways, exoelectrogens, are a critical part of microbial electrochemical technologies that aim to impact applications in bioenergy, biosensing, and biocomputing. However, there are not yet any examples of economically viable microbial electrochemical technologies due to the limitations of naturally occurring exoelectrogens. Here we first briefly summarize recent discoveries in understanding extracellular electron transfer pathways, then review in-depth the creation of customized and novel exoelectrogens for biotechnological applications. We analyze engineering efforts to increase current production in native exoelectrogens, which reveals that modulating certain processes within extracellular electron transfer are more effective than others. We also review efforts to create new exoelectrogens and highlight common challenges in this work. Lastly, we summarize work utilizing engineered exoelectrogens for biotechnological applications and the key obstacles to their future development. Fueled by the development of genetic tools, these approaches will continue to expand and genetically modified organisms will continue to improve the outlook for microbial electrochemical technologies.
Bioresource Technology · 2018
Scientific Reports · 2015
Membrane fouling remains an obstacle to wide-spread applications of membrane bioreactors (MBRs) for wastewater treatment and reclamation. Herein, we report a simple method to prepare a composite conductive microfiltration (MF) membrane by introducing a stainless steel mesh into a polymeric MF membrane and to effectively control its fouling by applying an external electric field. Linear sweep voltammetry and electrochemical impedance spectroscopy analyses showed that this conductive membrane had very good electrochemical properties. Batch tests demonstrated its anti-fouling ability in filtration of bovine serum albumin, sodium alginate, humic acid and silicon dioxide particles as model foulants. The fouling rate in continuous-flow MBRs treating wastewater was also decreased by about 50% for this conductive membrane with 2 V/cm electric field compared to the control test during long-term operation. The enhanced electrostatic repulsive force between foulants and membrane, in-situ cleaning by H2O2 generated from oxygen reduction, and decreased production of soluble microbial products and extracellular polymeric substances contributed to fouling mitigation in this MBR. The results of this study shed light on the control strategy of membrane fouling for achieving a sustainable operation of MBRs.
Nature Reviews Earth & Environment · 2024
Effective management of water resources is crucial for global food security and sustainable development. In this Review, we explore the potential benefits and challenges associated with treated wastewater (TW) reuse for irrigation. Currently, 400 km3 yr−1 of wastewater is generated globally, but <20% is treated, and of that TW, only 2–15% is reused for irrigation depending on region. The main limitation of TW for irrigation is the inability of current treatment technologies to completely remove all micropollutants and contaminants of emerging concern, some of which have unknown impacts on crops, environment and health. However, advanced water treatment and reuse schemes, supported by water quality monitoring and regulations, can provide a stable water supply for agricultural production, as demonstrated in regions such as the USA and Israel. Such schemes could potentially serve a net energy source, as the embedded energy in wastewater exceeds treatment needs by 9 to 10 times. Agriculturally useful nutrients such as nitrogen, phosphorus and potassium could be also recovered and reused. TW reuse for irrigation could act as a major contributor to a circular economy and sustainable development, but the first steps will be funding and implementation of advanced and sustainable treatment technologies and social acceptance. Treated wastewater (TW) reuse for irrigation could alleviate water imbalances and boost food production in water-scarce regions, thus promoting global food and water security. This Review discusses the potential and challenges of widespread TW reuse for agriculture in a circular economy framework.
Annual Review of Chemical and Biomolecular Engineering · 2021
Owing to rising levels of greenhouse gases in our atmosphere and oceans, climate change poses significant environmental, economic, and social challenges globally. Technologies that enable carbon capture and conversion of greenhouse gases into useful products will help mitigate climate change by enabling a new circular carbon economy. Gas fermentation usingcarbon-fixing microorganisms offers an economically viable and scalable solution with unique feedstock and product flexibility that has been commercialized recently. We review the state of the art of gas fermentation and discuss opportunities to accelerate future development and rollout. We discuss the current commercial process for conversion of waste gases to ethanol, including the underlying biology, challenges in process scale-up, and progress on genetic tool development and metabolic engineering to expand the product spectrum. We emphasize key enabling technologies to accelerate strain development for acetogens and other nonmodel organisms.
Scientific Reports · 2021
Anion exchange membrane (AEM) electrolysis is a promising solution for large-scale hydrogen production from renewable energy resources. However, the performance of AEM electrolysis is still lower than what can be achieved with conventional technologies. The performance of AEM electrolysis is limited by integral components of the membrane electrode assembly and the reaction kinetics, which can be measured by ohmic and charge transfer resistances. We here investigate and then quantify the contributions of the ohmic and charge transfer resistances, and the rate-determining steps, involved in AEM electrolysis by using electrochemical impedance spectroscopy analysis. The factors that have an effect on the performance, such as voltage, flow rate, temperature and concentration, were studied at 1.5 and 1.9 V. Increased voltage, flow rate, temperature and concentration of the electrolyte strongly enhanced the anodic activity. We observed that here the anodic reaction offered a greater contribution to the overpotential than the cathode did.
Bioresource Technology · 2015
Eco-Environment & Health · 2022
Water pollution is a major concern for public health and a sustainable future. It is urgent to purify wastewater with effective methods to ensure a clean water supply. Most wastewater remediation techniques rely heavily on functional materials, and cost-effective materials are thus highly favorable. Of great environmental and economic significance, developing waste-derived materials for wastewater remediation has undergone explosive growth recently. Herein, the applications of waste (e.g., biowastes, electronic wastes, and industrial wastes)-derived materials for wastewater purification are comprehensively reviewed. Sophisticated strategies for turning wastes into functional materials are firstly summarized, including pyrolysis and combustion, hydrothermal synthesis, sol-gel method, co-precipitation, and ball milling. Moreover, critical experimental parameters within different design strategies are discussed. Afterward, recent applications of waste-derived functional materials in adsorption, photocatalytic degradation, electrochemical treatment, and advanced oxidation processes (AOPs) are analyzed. We mainly focus on the development of efficient functional materials via regulating the internal and external characteristics of waste-derived materials, and the material's property-performance correlation is also emphasized. Finally, the key future perspectives in the field of waste-derived materials-driven water remediation are highlighted.
Clean Energy · 2025
Abstract This comprehensive review examines hydrogen’s potential as a pivotal clean energy carrier, focusing on its role in replacing fossil fuels across various industries. This study also examines recent advancements in hydrogen production technologies, including electrolysis, steam methane reforming, and biomass gasification, emphasizing their economic and environmental impacts. Special attention is given to hydrogen produced from renewable sources like solar and wind energy, emphasizing its benefits in reducing carbon emissions and contributing to a sustainable energy future. The review discusses technological challenges, cost factors, and the necessary infrastructure for hydrogen production and storage, particularly in relation to achieving global energy transition goals. Furthermore, the study stresses the importance of government policies and international collaboration to drive the adoption of hydrogen technologies. The study concludes by outlining the transformative potential of hydrogen in decarbonizing key sectors such as transportation and heavy industry. It demonstrates the significant contribution of hydrogen to a low-carbon global energy system and provides valuable insights into its role in improving grid stability, energy security, and supporting sustainable industrial practices.
Water Research · 2020
Recovering resources from wastewater systems is increasingly being emphasised. Many technologies exist or are under development for recycling nutrients such as nitrogen and phosphorus from wastewater to agriculture. Planning and design methodologies are needed to identify and deploy the most sustainable solutions in given contexts. For the environmental sustainability dimension, life cycle assessment (LCA) can be used to assess environmental impact potentials of wastewater-based nutrient recycling alternatives, especially nitrogen and phosphorus recycling. This review aims to evaluate how well the LCA methodology has been adapted and applied for assessing opportunities of wastewater-based nutrient recycling in the form of monomineral, multimineral, nutrient solution and organic solid. We reviewed 65 LCA studies that considered nutrient recycling from wastewater for agricultural land application. We synthesised some of their insights and methodological practices, and discussed the future outlook of using LCA for wastewater-based nutrient recycling. In general, more studies suggested positive environmental outcomes from wastewater-based nutrient recycling, especially when chemical inputs are minimised, and source separation of human excreta is achieved. The review shows the need to improve methodological consistency (e.g., multifunctionality, fertiliser offset accounting, contaminant accounting), ensure transparency of inventory and methods, consider uncertainty in comparative LCA context, integrate up-to-date cross-disciplinary knowledge (e.g., agriculture science, soil science) into LCA models, and consider the localised impacts of recycled nutrient products. Many opportunities exist for applying LCA at various scales to support decisions on wastewater-based nutrient recycling - for instance, performing "product perspective" LCA on recycled nutrient products, integrating "process perspective" LCA with other systems approaches for selecting and optimising individual recovery processes, assessing emerging nutrient recovery technologies and integrated resource recovery systems, and conducting systems analysis at city, national and global level.
Bioresource Technology · 2018
Science Advances · 2020
Nanobiohybrids, synthesized by integrating functional nanomaterials with living systems, have emerged as an exciting branch of research at the interface of materials engineering and biological science. Nanobiohybrids use synthetic nanomaterials to impart organisms with emergent properties outside their scope of evolution. Consequently, they endow new or augmented properties that are either innate or exogenous, such as enhanced tolerance against stress, programmed metabolism and proliferation, artificial photosynthesis, or conductivity. Advances in new materials design and processing technologies made it possible to tailor the physicochemical properties of the nanomaterials coupled with the biological systems. To date, many different types of nanomaterials have been integrated with various biological systems from simple biomolecules to complex multicellular organisms. Here, we provide a critical overview of recent developments of nanobiohybrids that enable new or augmented biological functions that show promise in high-tech applications across many disciplines, including energy harvesting, biocatalysis, biosensing, medicine, and robotics.
Energy & Environmental Science · 2016
Fe-based catalysts based on ricobendazole and niclosamide showed higher performance compared to Pt (20–25%) and AC (90–99%) and more durability in long terms operations.
International Journal of Hydrogen Energy · 2016
Frontiers in Microbiology · 2018
ATH-43 from Antarctica). The molecular and physiological properties of diverse extremophiles from Chile and their application in bioremediation or waste treatments are further discussed. Interestingly, the remarkable adaptative capabilities of extremophiles convert them into an attractive source of catalysts for bioremediation and industrial processes.
Chemosensors · 2015
The characterization of chemically modified sensors and biosensors is commonly performed by cyclic voltammetry and electron microscopies, which allow verifying electrode mechanisms and surface morphologies. Among other techniques, X-ray photoelectron spectroscopy (XPS) plays a unique role in giving access to qualitative, quantitative/semi-quantitative and speciation information concerning the sensor surface. Nevertheless, XPS remains rather underused in this field. The aim of this paper is to review selected articles which evidence the useful performances of XPS in characterizing the top surface layers of chemically modified sensors and biosensors. A concise introduction to X-ray Photoelectron Spectroscopy gives to the reader the essential background. The application of XPS for characterizing sensors suitable for food and environmental analysis is highlighted.
Biosensors and Bioelectronics · 2017
Access to safe drinking water is a human right, crucial to combat inequalities, reduce poverty and allow sustainable development. In many areas of the world, however, this right is not guaranteed, in part because of the lack of easily deployable diagnostic tools. Low-cost and simple methods to test water supplies onsite can protect vulnerable communities from the impact of contaminants in drinking water. Ideally such devices would also be easy to dispose of so as to leave no trace, or have a detrimental effect on the environment. To this aim, we here report the first paper microbial fuel cell (pMFC) fabricated by screen-printing biodegradable carbon-based electrodes onto a single sheet of paper, and demonstrate its use as a shock sensor for bioactive compounds (e.g. formaldehyde) in water. We also show a simple route to enhance the sensor performance by folding back-to-back two pMFCs electrically connected in parallel. This promising proof of concept work can lead to a revolutionizing way of testing water at point of use, which is not only green, easy-to-operate and rapid, but is also affordable to all.
Renewable and Sustainable Energy Reviews · 2015
Renewable and Sustainable Energy Reviews · 2015
Chemical Society Reviews · 2017
Energy harvesting is a topic of intense interest that aims to convert ambient forms of energy such as mechanical motion, light and heat, which are otherwise wasted, into useful energy. In many cases the energy harvester or nanogenerator converts motion, heat or light into electrical energy, which is subsequently rectified and stored within capacitors for applications such as wireless and self-powered sensors or low-power electronics. This review covers the new and emerging area that aims to directly couple energy harvesting materials and devices with electro-chemical systems. The harvesting approaches to be covered include pyroelectric, piezoelectric, triboelectric, flexoelectric, thermoelectric and photovoltaic effects. These are used to influence a variety of electro-chemical systems such as applications related to water splitting, catalysis, corrosion protection, degradation of pollutants, disinfection of bacteria and material synthesis. Comparisons are made between the range harvesting approaches and the modes of operation are described. Future directions for the development of electro-chemical harvesting systems are highlighted and the potential for new applications and hybrid approaches are discussed.
Analytica Chimica Acta · 2019
Bioresource Technology · 2020
Environmental Pollution · 2017
Chemical Society Reviews · 2015
Suspension or semi-solid electrodes have recently gained increased attention for large-scale applications such as grid energy storage, capacitive water deionization, and wastewater treatment. A suspension electrode is a multiphase material system comprised of an active (charge storing) material suspended in ionic solution (electrolyte). Gravimetrically, the electrolyte is the majority component and aids in physical transport of the active material. This principle enables, for the first time, scalability of electrochemical energy storage devices (supercapacitors and batteries) previously limited to small and medium scale applications. This critical review describes the ongoing material challenges encompassing suspension-based systems. The research described here combines classical aspects of electrochemistry, colloidal science, material science, fluid mechanics, and rheology to describe ion and charge percolation, adsorption of ions, and redox charge storage processes in suspension electrodes. This review summarizes the growing inventory of material systems, methods and practices used to characterize suspension electrodes, and describes universal material system properties (rheological, electrical, and electrochemical) that are pivotal in the design of high performing systems. A discussion of the primary challenges and future research directions is included.
ChemSusChem · 2022
In the movement to decarbonize our economy and move away from fossil fuels we will need to harness the waste products of our activities, such as waste lignocellulose, methane, and carbon dioxide. Our wastes need to be integrated into a circular economy where used products are recycled into a manufacturing carbon cycle. Key to this will be the recycling of plastics at the resin and monomer levels. Biotechnology is well suited to a future chemical industry that must adapt to widely distributed and diverse biological chemical feedstocks. Our increasing mastery of biotechnology is allowing us to develop enzymes and organisms that can synthesize a widening selection of desirable bulk chemicals, including plastics, at commercially viable productivities. Integration of bioreactors with electrochemical systems will permit new production opportunities with enhanced productivities and the advantage of using a low-carbon electricity from renewable and sustainable sources.
Frontiers in Bioengineering and Biotechnology · 2021
) displayed the ability to degrade various SOCs. Metabolic studies, genomic and metagenomics analyses have aided our understanding of the catabolic complexity and diversity present in these simple life forms which can be further applied for efficient biodegradation. The prolonged persistence of PAHs has led to the evolution of new degradative phenotypes through horizontal gene transfer using genetic elements like plasmids, transposons, phages, genomic islands, and integrative conjugative elements. Systems biology and genetic engineering of either specific isolates or mock community (consortia) might achieve complete, rapid, and efficient bioremediation of these PAHs through synergistic actions. In this review, we highlight various metabolic routes and diversity, genetic makeup and diversity, and cellular responses/adaptations by naphthalene and substituted naphthalene-degrading bacteria. This will provide insights into the ecological aspects of field application and strain optimization for efficient bioremediation.
Sensors · 2019
LoRaWAN is one of the most promising standards for long-range sensing applications. However, the high number of end devices expected in at-scale deployment, combined with the absence of an effective synchronization scheme, challenge the scalability of this standard. In this paper, we present an approach to increase network throughput through a Slotted-ALOHA overlay on LoRaWAN networks. To increase the single channel capacity, we propose to regulate the communication of LoRaWAN networks using a Slotted-ALOHA variant on the top of the Pure-ALOHA approach used by the standard; thus, no modification in pre-existing libraries is necessary. Our method is based on an innovative synchronization service that is suitable for low-cost wireless sensor nodes. We modelled the LoRaWAN channel with extensive measurement on hardware platforms, and we quantified the impact of tuning parameters on physical and medium access control layers, as well as the packet collision rate. Results show that Slotted-ALOHA supported by our synchronization service significantly improves the performance of traditional LoRaWAN networks regarding packet loss rate and network throughput.
Renewable and Sustainable Energy Reviews · 2017
Polymers · 2021
Electrospinning technology, which was previously known as a scientific interdisciplinary research approach, is now ready to move towards a practice-based interdisciplinary approach in a variety of fields, progressively. Electrospun nanofiber-applied products are made directly from a nonwoven fabric-based membranes prepared from polymeric liquids involving the application of sufficiently high voltages during electrospinning. Today, electrospun nanofiber-based materials are of remarkable interest across multiple fields of applications, such as in electronics, sensors, functional garments, sound proofing, filters, wound dressing and scaffolds. This article presents such a review for summarizing the current progress on the manufacturing scalability of electrospun nanofibers and the commercialization of electrospun nanofiber products by dedicated companies globally. Despite the clear potential and limitless possibilities for electrospun nanofiber applications, the uptake of electrospinning by the industry is still limited due to the challenges in the manufacturing and turning of electrospun nanofibers into physical products. The recent developments in the field of electrospinning, such as the prominent nonwoven technology, personal views and the potential path forward for the growth of commercially applied products based on electrospun nanofibers, are also highlighted.
Environmental Chemistry Letters · 2022
Abstract The Ukraine conflict has put critical pressure on gas supplies and increased the price of fertilisers. As a consequence, biogas has gained remarkable attention as a local source of both gas for energy and biofertiliser for agriculture. Moreover, climate change-related damage incentivises all sectors to decarbonise and integrate sustainable practices. For instance, anaerobic digestion allows decarbonisation and optimal waste management. Incorporating a biogas system in each country would limit global warming to 2 °C. If suitable policies mechanisms are implemented, the biogas industry could reduce global greenhouse gas emissions by 3.29–4.36 gigatonnes carbon dioxide equivalent, which represent about 10–13% of global emissions. Here, we review the role of the biogas sector in capturing methane and mitigating carbon emissions associated with biogas outputs. Since biogas impurities can cause severe practical difficulties in biogas storing and gas grid delivering systems, we present upgrading technologies that remove or consume the carbon dioxide in raw biogas, to achieve a minimum of 95% methane content. We discuss the role of hydrogen-assisted biological biogas upgrading in carbon sequestration by converting carbon dioxide to biomethane via utilising hydrogen generated primarily through other renewable energy sources such as water electrolysis and photovoltaic solar facilities or wind turbines. This conceptual shift of 'power to gas' allows storing and utilising the excess of energy generated in grids. By converting carbon dioxide produced during anaerobic digestion into additional biomethane, biogas has the potential to meet 53% of the demand for fossil natural gas. We also evaluate the role of digestate from biogas systems in producing biochar, which can be used directly as a biofertiliser or indirectly as a biomethanation enhancement, upgrading, and cleaning material.
Food Technology and Biotechnology · 2021
The dairy industry produces large amounts of whey as a by- or co-product, which has led to considerable environmental problems due to its high organic matter content. Over the past decades, possibilities of more environmentally and economically efficient whey utilisation have been studied, primarily to convert unwanted end products into a valuable raw material. Sustainable whey management is mostly oriented to biotechnological and food applications for the development of value-added products such as whey powders, whey proteins, functional food and beverages, edible films and coatings, lactic acid and other biochemicals, bioplastic, biofuels and similar valuable bioproducts. This paper provides an overview of the sustainable utilization of whey and its constituents, considering new refining approaches and integrated processes to convert whey, or lactose and whey proteins to high value-added whey-based products.