Paper · MFC
Polyelectrolyte–single wall carbon nanotube composite as an effective cathode catalyst for air-cathode microbial fuel cells
Summary
What the paper reports, in its own words.
Abstract
Polyelectrolyte–single wall carbon nanotube (SCNT) composites are prepared by a solution-based method and used as metal-free cathode catalysts for oxygen reduction reaction (ORR) in air-cathode microbial fuel cells (MFCs). In this study, two types of polyelectrolytes, polydiallyldimethylammonium chloride (PDDA) and poly[bis(2-chloroethyl)ether-alt-1,3-bis[3-(dimethylamino)propyl]urea] (PEPU) are applied to decorate the SCNTs and the resulting catalysts exhibit remarkable catalytic ability toward ORR in MFC applications. The enhanced catalytic ability could be attributed to the positively charged quaternary ammonium sites of polyelectrolytes, which increase the oxygen affinity of SCNTs and reduce activation energy in the oxygen reduction process. It is also found that PEPU–SCNT composite-based MFCs show efficient performance with maximum power density of 270.1 mW m⁻², comparable to MFCs with the benchmark Pt/C catalyst (375.3 mW m⁻²), while PDDA–SCNT composite-based MFCs produce 188.9 mW m⁻². These results indicate that PEPU–SCNT and PDDA–SCNT catalysts are promising candidates as metal-free cathode catalysts for ORR in MFCs and could facilitate MFC scaling up and commercialization.
AI summary
100% confidenceInternational MFC research in nanotechnology with focus on nanotechnology, electrode, performance. Polyelectrolyte–single wall carbon nanotube (SCNT) composites are prepared by a solution-based method and used a...
Generated by MESSAI extraction pipeline · review against source PDF
Extracted values
Every value pulled from the paper, with its source, so each number can be checked against the text.
n = 5 extracted values
Select a citation to see the quote, page and confidence behind a value.
0 of 5 extracted rows modelable
- 1 not canonicalised (no canonical slug)
- 4 no SI value
| Parameter | Value | Unit | Confidence | Source | Modelable |
|---|---|---|---|---|---|
| Maximum power density×2 | 270 | mW/m² | 60% | extracted | Excluded: no SI value |
| Cathode material | air-cathode | — | 60% | extracted | Excluded: no SI value |
| Electrode material | carbon nanotube | — | 50% | extracted | Excluded: not canonicalised (no canonical slug) |
| Cathode material | PEPU-SCNT composite | — | 50% | extracted | Excluded: no SI value |
Methodology
What was the system and how was it run
Methodology
Methodology
Polyelectrolyte–single wall carbon nanotube composites were prepared by a solution-based method and used as metal-free cathode catalysts for oxygen reduction reaction (ORR) in air-cathode microbial fuel cells (MFCs).
Electrode specifications
| Field | Value |
|---|---|
| materials | ["carbon nanotube","CNT"] |
Performance metrics
| Field | Value |
|---|---|
| citation count | 3 |
Electrochemical data
| Field | Value |
|---|---|
| max power density | 270.1 |
Pipeline
Raw extractions, artifacts, quality signal
Extraction quality
honesty signalCalibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.
Parameter completeness
50%
Fraction of expected parameters extracted
Data completeness
60%
Overall extraction coverage across fields
AI confidence
100%
Model self-reported confidence
Mean parameter confidence
54%
Average confidence across PaperParameter rows surfaced above
review against source PDF before citing · scores 0–1
Chart explorer
Move the inputs this paper used and see how the predicted outcome shifts.
Explore model
The reactor in 3D, with flow you can switch on and off.
AI insights
Contradictions, gaps and opportunities found by comparing this paper with the corpus.
Compare similar papers
The nearest papers by system, materials and organisms, with their outcomes side by side.
Representative model, generic MFC
Tap to interactRepresentative model, generic MFC
Representative MFC — matched on the paper’s system type only, not its reactor or geometry.
Keywords
- Microbial fuel cell
- Polyelectrolyte
- Catalysis
- Cathode
- Chemical engineering
- Carbon nanotube
Cite
Huanan Wu, Min Lu, Lin Guo et al. (2014). Polyelectrolyte–single wall carbon nanotube composite as an effective cathode catalyst for air-cathode microbial fuel cells. Water Science and Technology. https://doi.org/10.2166/wst.2014.416
- Journal
- Water Science and Technology
Open in lab for full controls, parameter editing, and template overlays.
Open in lab