Paper · MES
Microbial electrosynthesis with Clostridium ljungdahlii benefits from hydrogen electron mediation and permits a greater variety of products
Summary
What the paper reports, in its own words.
Abstract
Microbial electrosynthesis (MES) is a very promising technology addressing the challenge of carbon dioxide recycling into organic compounds, which might serve as building blocks for the (bio)chemical industry. However, poor process control and understanding of fundamental aspects such as the microbial extracellular electron transfer (EET) currently limit further developments. In the model acetogen Clostridium ljungdahlii , both direct and indirect electron consumption via hydrogen have been proposed. However, without clarification neither targeted development of the microbial catalyst nor process engineering of MES are possible. In this study, cathodic hydrogen is demonstrated to be the dominating electron source for C. ljungdahlii at electroautotrophic MES allowing for superior growth and biosynthesis, compared to previously reported MES using pure cultures. Hydrogen availability distinctly controlled an either planktonic- or biofilm-dominated lifestyle of C. ljungdahlii . The most robust operation yielded higher planktonic cell densities in a hydrogen mediated process, which demonstrated the uncoupling of growth and biofilm formation. This coincided with an increase of metabolic activity, acetate titers, and production rates (up to 6.06 g L -1 at 0.11 g L -1 d -1 ). For the first time, MES using C. ljungdahlii was also revealed to deliver other products than acetate in significant amounts: here up to 0.39 g L -1 glycine or 0.14 g L -1 ethanolamine. Hence, a deeper comprehension of the electrophysiology of C. ljungdahlii was shown to be key for designing and improving bioprocess strategies in MES research.
Extracted values
Every value pulled from the paper, with its source, so each number can be checked against the text.
n = 52 extracted values
Select a citation to see the quote, page and confidence behind a value.
13 of 52 extracted rows modelable
- 21 not canonicalised (no canonical slug)
- 7 no SI value
- 1 not marked applicable to modeling
- 4 verifier rejected the value
- 6 contradicts other papers
| Parameter | Value | Unit | Confidence | Source | Notes | Modelable |
|---|---|---|---|---|---|---|
| Acetate Production Rate | 2.93 | g m⁻² d⁻¹ | 95% | hplc | "In the planktonic-dominant reactor, the acetate production was very high achievi…" · T=37°C, pH(an)=5.7, substrate=CO2, steady_state | Excluded: no SI value |
| Electrode Surface Area×2 | 153 | cm² | 95% | geometric measurement | "In certain experiments, as indicated in the respective sections, bigger cathodes…" · replicates_n=1, condition_hint=Design parameter, larger electrode, electrode_material=graphite EDM-3 | Modelable |
| Electrode Surface Area×2 | 26.6 | cm² | 95% | geometric measurement | "The standard electrode surface area was 26.59 cm2 (surface-area-to-reactor-volum…" · replicates_n=1, condition_hint=Design parameter, standard electrode, electrode_material=graphite EDM-3 | Modelable |
| Coulombic efficiency | 87.4 | % | 95% | chronoamperometry with charge integration | "In the planktonic-dominant reactor, the acetate production was very high achievi…" · T=37°C, pH(an)=5.7, substrate=CO2, steady_state | Modelable |
| H₂ evolution threshold (dissolved) | -650 | mV | 95% | linear sweep voltammetry with h2 microsensor | "Dissolved H2 started being detected by a H2 microsensor close to the cathode sur…" · T=37°C, pH(an)=5.7, transient | Excluded: not canonicalised (no canonical slug) |
| H₂ evolution threshold (off-gas) | -780 | mV | 95% | linear sweep voltammetry with off-gas analyzer | "At −780 mV, the off-gas analyzer detected H2 in the headspace in the same test (p…" · T=37°C, pH(an)=5.7, transient | Excluded: not canonicalised (no canonical slug) |
| Acetate Production Rate | 0.11 | g L⁻¹ d⁻¹ | 95% | hplc | "Acetate was produced electroautotrophically by C. ljungdahlii reaching a maximum…" · T=37°C, pH(an)=5.7, substrate=CO2, steady_state | Modelable |
| Acetic Acid Concentration | 6.06 | g L⁻¹ | 95% | hplc | "In the planktonic-dominant reactor, the acetate production was very high achievi…" · T=37°C, pH(an)=5.7, substrate=CO2, steady_state | Modelable |
| Inoculation density (high) | 1E8 ± 1.8E7 (SD) | cells | 95% | cell counting with neubauer chamber | "C. ljungdahlii was inoculated in the MES from pre-grown autotrophic cultures usi…" · T=37°C, pH(an)=5.7, substrate=CO2, startup | Excluded: not canonicalised (no canonical slug) |
| Inoculation density (low) | 3.4E7 ± 6E6 (SD) | cells | 95% | cell counting with neubauer chamber | "C. ljungdahlii was inoculated in the MES from pre-grown autotrophic cultures usi…" · T=37°C, pH(an)=5.7, substrate=CO2, startup | Excluded: not canonicalised (no canonical slug) |
| Surface-area-to-reactor-volume ratio (standard)×2 | 66.5 | cm² L⁻¹ | 95% | geometric calculation | "The standard electrode surface area was 26.59 cm2 (surface-area-to-reactor-volum…" · replicates_n=1, condition_hint=Design parameter, standard electrode, electrode_material=graphite EDM-3 | Excluded: not canonicalised (no canonical slug) |
| Surface-area-to-reactor-volume ratio (larger)×2 | 383 | cm² L⁻¹ | 95% | geometric calculation | "In certain experiments, as indicated in the respective sections, bigger cathodes…" · replicates_n=1, condition_hint=Design parameter, larger electrode, electrode_material=graphite EDM-3 | Excluded: not canonicalised (no canonical slug) |
| Glycine titer | 0.15 | g L⁻¹ | 90% | hplc with phthaldialdehyde derivatization | "For MES using larger electrodes and hence increased H2 availability, lower titer…" · T=37°C, pH(an)=5.7, substrate=CO2, steady_state | Excluded: not canonicalised (no canonical slug) |
| Ethanolamine titer | 0.13 | g L⁻¹ | 90% | hplc with phthaldialdehyde derivatization | "For MES using larger electrodes and hence increased H2 availability, lower titer…" · T=37°C, pH(an)=5.7, substrate=CO2, steady_state | Excluded: not canonicalised (no canonical slug) |
| Glycine titer | 0.045 | g L⁻¹ | 90% | hplc with phthaldialdehyde derivatization | "In the biofilm-dominant reactor, very low titers were reached (0.045 g L−1 glyci…" · T=37°C, pH(an)=5.7, substrate=CO2, steady_state | Excluded: not canonicalised (no canonical slug) |
| Ethanolamine titer | 0.011 | g L⁻¹ | 90% | hplc with phthaldialdehyde derivatization | "In the biofilm-dominant reactor, very low titers were reached (0.045 g L−1 glyci…" · T=37°C, pH(an)=5.7, substrate=CO2, steady_state | Excluded: not canonicalised (no canonical slug) |
| Absolute current (planktonic-dominant, larger electrode) | -15.4 | mA | 90% | chronoamperometry | "but the peak of absolute current of −15.38 mA (compared to −8.66 ± 2.39 mA), and…" · T=37°C, pH(an)=5.7, substrate=CO2, steady_state | Excluded: not canonicalised (no canonical slug) |
| Absolute current (planktonic-dominant, smaller electrode) | -8.66 ± 2.39 (SD) | mA | 90% | chronoamperometry | "but the peak of absolute current of −15.38 mA (compared to −8.66 ± 2.39 mA), and…" · T=37°C, pH(an)=5.7, substrate=CO2, steady_state | Excluded: not canonicalised (no canonical slug) |
| Acetic Acid Concentration | 1.43 | g L⁻¹ | 90% | hplc | "The acetate titers obtained in the planktonic-dominant conditions (1.43 g L−1) w…" · T=37°C, pH(an)=5.7, substrate=CO2, steady_state | Modelable |
| Absolute current (biofilm-dominant, smaller electrode) | -6.38 ± 7.54 (SD) | mA | 90% | chronoamperometry | "Noteworthy, the biofilm-dominant reactor had a similar performance in terms of a…" · T=37°C, pH(an)=5.7, substrate=CO2, steady_state | Excluded: not canonicalised (no canonical slug) |
| Specific H₂ Production | 0.31 | mL L⁻¹ min⁻¹ | 90% | chronoamperometry with charge integration | "Estimated H2 production rates from transferred charge were 0.21 mL L−1 min−1 for…" · T=37°C, pH(an)=5.7, substrate=CO2, steady_state | Excluded: no SI value |
| Coulombic efficiency | 18.2 | % | 90% | chronoamperometry with charge integration | "CE (Fig. S9†) calculated for acetate formation between days 10 and 40 (no H2 lim…" · T=37°C, pH(an)=5.7, substrate=CO2, steady_state | Excluded: contradicts other papers |
| Coulombic efficiency | 8.8 | % | 90% | chronoamperometry with charge integration | "CE (Fig. S9†) calculated for acetate formation between days 10 and 40 (no H2 lim…" · T=37°C, pH(an)=5.7, substrate=CO2, steady_state | Excluded: contradicts other papers |
| Coulombic efficiency | 1.2 | % | 90% | chronoamperometry with charge integration | "In the biofilm-dominant reactor, very low titers were reached (0.045 g L−1 glyci…" · T=37°C, pH(an)=5.7, substrate=CO2, steady_state | Excluded: contradicts other papers |
| Current Density | -0.45 | mA cm⁻² | 90% | chronoamperometry | "Peak current densities (1-day window from the maximum) during this period were −…" · T=37°C, pH(an)=5.7, substrate=CO2, steady_state | Excluded: verifier rejected the value |
Methodology
What was the system and how was it run
Operating conditions
7 runs extracted| Run | T°C | pHan | pHcat | Substrate | [S]mg/L | HRTh | Mode | R_extΩ | V_appV | Inoculum |
|---|---|---|---|---|---|---|---|---|---|---|
| v2-05bb9b122ed74574 | 37 | 5.7 | — | CO2 | — | — | steady_state | — | -0.9 | — |
| v2-1ed627e55678e937 | 37 | 5.7 | — | — | — | — | transient | — | -0.78 | — |
| v2-5c6f1237f6c44eb0 | 37 | 5.7 | — | — | — | — | transient | — | -0.65 | — |
| v2-6061eaf6b02fa52a | 37 | 5.7 | — | CO2 | — | — | startup | — | -0.9 | — |
| v2-791630c0fb4d66e8 | 37 | 5.7 | — | CO2 | — | — | transient | — | -0.65 | — |
| v2-8016efea3e05875b | 37 | 5.7 | — | — | — | — | steady_state | — | -0.9 | — |
| v2-f4e941072482c6a6 | 37 | 5.7 | — | — | — | — | — | — | — | — |
Pipeline
Raw extractions, artifacts, quality signal
Extraction quality
honesty signalCalibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.
AI confidence
60%
Model self-reported confidence
Mean parameter confidence
91%
Average confidence across PaperParameter rows surfaced above
review against source PDF before citing · scores 0–1
Chart explorer
Move the inputs this paper used and see how the predicted outcome shifts.
Explore model
The reactor in 3D, with flow you can switch on and off.
AI insights
Contradictions, gaps and opportunities found by comparing this paper with the corpus.
Compare similar papers
The nearest papers by system, materials and organisms, with their outcomes side by side.
Source PDF
The paper as published.
Representative model, generic microbial electrochemical system
Tap to interactRepresentative model, generic microbial electrochemical system
Representative microbial electrochemical system — matched on the paper’s system type only, not its reactor or geometry.
In this record
Organisms, parameters and materials this paper reports. Each links to its page.
Organisms · 1
Keywords
- Electrosynthesis
- Clostridium
- Mediation
- Hydrogen
Cite
Santiago T. Boto, Bettina Bardl, Falk Harnisch et al. (2023). Microbial electrosynthesis with Clostridium ljungdahlii benefits from hydrogen electron mediation and permits a greater variety of products. Green Chemistry. https://doi.org/10.1039/d3gc00471f
- PubMed
- 37288452
- Journal
- Green Chemistry
Open in lab for full controls, parameter editing, and template overlays.
Open in lab