Paper
Graphite Fiber Brush Anodes for Increased Power Production in Air-Cathode Microbial Fuel Cells
Summary
What the paper reports, in its own words.
Abstract
To efficiently generate electricity in microbial fuel cells, the surface area of the anode must be maximized to support biofilm growth while minimizing total reactor volume. Graphite fiber brush electrodes provide high surface areas and porosities. A brush electrode placed in a single-chamber air-cathode MFC produced a maximum power density of 1430 mW/m² (73 W/m³) with ammonia-treated brush anodes and acetate substrate, exceeding previous reports for MFC power densities.
Extracted values
Every value pulled from the paper, with its source, so each number can be checked against the text.
n = 30 extracted values
Select a citation to see the quote, page and confidence behind a value.
29 of 30 extracted rows modelable
- 1 not canonicalised (no canonical slug)
| Parameter | Value | Unit | Confidence | Source | Notes | Modelable |
|---|---|---|---|---|---|---|
| Power Density Volumetric | 0.93 | W/m³ | 90% | extracted | "Using a lower ionic strength solution reduced power production to 570 mW/m2 (0.9…" · T=23°C, substrate=glucose | Modelable |
| Power Density Volumetric | 29 | W/m³ | 90% | extracted | "TABLE 1. Power Production and Internal Resistances of MFCs Containing Various Co…" · T=30°C, substrate=acetate | Modelable |
| Internal Resistance | 65 | Ω | 90% | extracted | "TABLE 1. Power Production and Internal Resistances of MFCs Containing Various Co…" · T=23°C, substrate=glucose | Modelable |
| Internal Resistance | 58 | Ω | 90% | extracted | "TABLE 1. Power Production and Internal Resistances of MFCs Containing Various Co…" · T=23°C, substrate=glucose | Modelable |
| Internal Resistance | 50 | Ω | 90% | extracted | "The internal resistance of the brush B-MFC was 50 Ω, with values for the other r…" · T=23°C, substrate=glucose | Modelable |
| Power Density | 1,430 | mW/m² | 90% | extracted | "Brush electrodes used in B-MFCs produced up to 1430 mW/m2 (2.3 W/m3), compared t…" · T=23°C, substrate=glucose | Modelable |
| Power Density | 1,100 | mW/m² | 90% | extracted | "The maximum power production was 1100 mW/m2 (0.11 g of 6 µm diameter fibers) (Fi…" · T=23°C, substrate=glucose | Modelable |
| Power Density | 570 | mW/m² | 90% | extracted | "Using a lower ionic strength solution reduced power production to 570 mW/m2 (0.9…" · T=23°C, substrate=glucose | Modelable |
| Power Density | 850 | mW/m² | 90% | extracted | "In tests with the 10 µm diameter fiber, power ranged from 690 to 850 mW/m2 for m…" · T=23°C, substrate=glucose | Modelable |
| Power Density Volumetric | 2 | W/m³ | 90% | extracted | "TABLE 1. Power Production and Internal Resistances of MFCs Containing Various Co…" · T=23°C, substrate=glucose | Modelable |
| Power Density Volumetric | 0.5 | W/m³ | 90% | extracted | "Using a lower ionic strength solution reduced power production to 570 mW/m2 (0.9…" · T=23°C, substrate=glucose | Modelable |
| Power Density | 750 | mW/m² | 90% | extracted | "Power production reached a maximum of 750 mW/m2 with the untreated anode, which …" · T=23°C, substrate=glucose | Modelable |
| Internal Resistance | 49 | Ω | 90% | extracted | "TABLE 1. Power Production and Internal Resistances of MFCs Containing Various Co…" · T=23°C, substrate=glucose | Modelable |
| Coulombic efficiency | 23 | % | 90% | extracted | "B-MFCs inoculated with wastewater produced up to 1430 mW/m2 (2.3 W/m3, CE ) 23%)…" · T=23°C, substrate=glucose | Modelable |
| Power Density | 600 | mW/m² | 90% | extracted | "Brush electrodes used in B-MFCs produced up to 1430 mW/m2 (2.3 W/m3), compared t…" · T=23°C, substrate=glucose | Modelable |
| Current Density | 0.82 | mA/cm² | 90% | extracted | "Based on polarization data, the maximum power produced was 2400 mW/m2 at a curre…" · T=30°C, substrate=acetate | Modelable |
| Voltage | 0.57 | V | 90% | extracted | "producing a maximum voltage of 0.57 V and a CE ) 41% with the 1000 Ω resistor (F…" · T=30°C, substrate=acetate | Modelable |
| Coulombic efficiency | 41 | % | 90% | extracted | "producing a maximum voltage of 0.57 V and a CE ) 41% with the 1000 Ω resistor (F…" · T=30°C, substrate=acetate | Modelable |
| Power Density Volumetric | 73 | W/m³ | 90% | extracted | "Based on polarization data, the maximum power produced was 2400 mW/m2 at a curre…" · T=30°C, substrate=acetate | Modelable |
| Power Density | 2,400 | mW/m² | 90% | extracted | "Based on polarization data, the maximum power produced was 2400 mW/m2 at a curre…" · T=30°C, substrate=acetate | Modelable |
| Internal Resistance | 31 | Ω | 90% | extracted | "versus Rint ) 31 Ω for a carbon cloth C-MFC (200 mM PBS, 4 cm electrode spacing)" · T=30°C, substrate=acetate | Modelable |
| Power Density Volumetric | 0.98 | W/m³ | 90% | extracted | "Brush electrodes used in B-MFCs produced up to 1430 mW/m2 (2.3 W/m3), compared t…" · T=23°C, substrate=glucose | Modelable |
| Power Density | 1,070 | mW/m² | 90% | extracted | "TABLE 1. Power Production and Internal Resistances of MFCs Containing Various Co…" · T=30°C, substrate=acetate | Modelable |
| Power Density | 300 | mW/m² | 90% | extracted | "Using a lower ionic strength solution reduced power production to 570 mW/m2 (0.9…" · T=23°C, substrate=glucose | Modelable |
| Power Density Volumetric | 1.2 | W/m³ | 90% | extracted | "TABLE 1. Power Production and Internal Resistances of MFCs Containing Various Co…" · T=23°C, substrate=glucose | Modelable |
Methodology
What was the system and how was it run
Operating conditions
4 runs extracted| Run | T°C | pHan | pHcat | Substrate | [S]mg/L | HRTh | Mode | R_extΩ | V_appV | Inoculum |
|---|---|---|---|---|---|---|---|---|---|---|
| v2-108fd662ed65880d | 30 | — | — | acetate | — | — | — | 50 | — | — |
| v2-92520e3fce75212b | 23 | — | — | glucose | — | — | — | — | — | — |
| v2-ef227790a6bba213 | 30 | — | — | acetate | — | — | — | 1000 | — | — |
| v2-fa0330df8f356026 | 30 | — | — | acetate | — | — | — | — | — | — |
Pipeline
Raw extractions, artifacts, quality signal
Extraction quality
honesty signalCalibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.
Mean parameter confidence
90%
Average confidence across PaperParameter rows surfaced above
review against source PDF before citing · scores 0–1
Chart explorer
Move the inputs this paper used and see how the predicted outcome shifts.
Explore model
The reactor in 3D, with flow you can switch on and off.
AI insights
Contradictions, gaps and opportunities found by comparing this paper with the corpus.
Compare similar papers
The nearest papers by system, materials and organisms, with their outcomes side by side.
Source PDF
The paper as published.
No 3D model is mapped to this paper yet. The values extracted from it are listed under Extracted values.
Keywords
- MFC
- air-cathode
- graphite brush anode
- power density
- acetate
Cite
Bruce Logan, Shaoan Cheng, Valerie Watson et al. (2007). Graphite Fiber Brush Anodes for Increased Power Production in Air-Cathode Microbial Fuel Cells. Environmental Science & Technology. https://doi.org/10.1021/es062644y