Paper · MFC
A novel process of anodic water denitrification in an upflow tubular microbial fuel cell: effect of C/N ratio
Summary
What the paper reports, in its own words.
Abstract
Abstract BACKGROUND A high nitrate concentration in groundwater in some parts of Iran has been detected due to untreated wastewater discharge and agriculture activities. Therefore, the development of treatment technology in this area using a new biological method was carried out. RESULTS Activated sludge originating from slaughterhouse wastewater treatment plants and immobilized on graphite granules exhibited noticeable denitrification activity in a double chamber upflow tubular microbial fuel cell (UTMFC). The effects of three C/N values at different initial nitrate concentrations and external resistances on nitrate and chemical oxygen demand (COD) removal efficiencies as well as cell performance were studied at a fixed hydraulic retention time (HRT) of 12 h. Based on nucleotide sequence of 16S rRNA, four bacterial strains from anodic biofilm were also identified. The UTMFC operated in a continuous mode with C/N values of 20 and 10 was able to denitrify up to 150 mg L –1 nitrate without more accumulation of nitrite and ammonium ions than is permitted for drinking water. The maximum nitrate removal capacity of 0.25 ± 0.01 kg NO 3 − ‐N/ (m 3 net anodic compartment ‘NAC’.day) was achieved at 400 mg L –1 initial nitrate concentration and at C/N = 10. Additionally, the maximum current density and power generation at this ratio were found to be 46.04 A m –3 NAC and 16.96 W/m 3 NAC, respectively. No efficient denitrification was observed at C/N = 5 while nitrite/ammonium formation increased. CONCLUSION The experimental data documented the feasibility of bioelectricity generation and substrate removal utilizing acetate containing water under the adopted operating conditions of UTMFC, and the proposed system allowed the simultaneous heterotrophic denitrification/electricity generation. © 2020 Society of Chemical Industry
AI summary: matches the abstract (70% confidence) · review against source PDF
Key findings
- The UTMFC operated in a continuous mode with a fixed hydraulic retention time (HRT) of 12 hours.
Extracted values
Every value pulled from the paper, with its source, so each number can be checked against the text.
n = 6 extracted values
Select a citation to see the quote, page and confidence behind a value.
0 of 5 extracted rows modelable
- 3 not canonicalised (no canonical slug)
- 2 no SI value
| Parameter | Value | Unit | Confidence | Source | Modelable |
|---|---|---|---|---|---|
| Substrate | acetate,wastewater | — | 80% | llm | |
| Reactor type | tubular | — | 80% | extracted | Excluded: not canonicalised (no canonical slug) |
| Microbial community | l strains from anodic biofilm were also identified | — | 50% | extracted | Excluded: not canonicalised (no canonical slug) |
| Electrode material | graphite | — | 50% | extracted | Excluded: not canonicalised (no canonical slug) |
| Anode material | graphite granules | — | 50% | extracted | Excluded: no SI value |
| Hydraulic retention time | 12 | h | 50% | extracted | Excluded: no SI value |
Methodology
What was the system and how was it run
Methodology
Methodology
The effects of C/N values, initial nitrate concentrations, and external resistances on nitrate and chemical oxygen demand (COD) removal efficiencies were studied.
System configuration
| Field | Value |
|---|---|
| chamber configuration | tubular |
| system type | MFC |
Electrode specifications
| Field | Value |
|---|---|
| materials | ["graphite"] |
Biological parameters
| Field | Value |
|---|---|
| microbial community | l strains from anodic biofilm were also identified |
Performance metrics
| Field | Value |
|---|---|
| citation count | 4 |
Operational parameters
| Field | Value |
|---|---|
| substrate | ["acetate","wastewater"] |
Pipeline
Raw extractions, artifacts, quality signal
Extraction quality
honesty signalCalibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.
Parameter completeness
63%
Fraction of expected parameters extracted
Data completeness
60%
Overall extraction coverage across fields
AI confidence
70%
Model self-reported confidence
Mean parameter confidence
60%
Average confidence across PaperParameter rows surfaced above
review against source PDF before citing · scores 0–1
Chart explorer
Move the inputs this paper used and see how the predicted outcome shifts.
Explore model
The reactor in 3D, with flow you can switch on and off.
AI insights
Contradictions, gaps and opportunities found by comparing this paper with the corpus.
Compare similar papers
The nearest papers by system, materials and organisms, with their outcomes side by side.
Representative model, generic MFC
Tap to interactRepresentative model, generic MFC
Representative MFC — matched on the paper’s system type only, not its reactor or geometry.
Keywords
- Microbial fuel cell
- Nitrate
- Denitrification
- Nitrite
- Wastewater
- Ammonium
Cite
Leila Davarpanah, Farimah Sarbisheh, Elham Abdollahzadeh Sharghi (2020). A novel process of anodic water denitrification in an upflow tubular microbial fuel cell: effect of C/N ratio. Journal of Chemical Technology & Biotechnology. https://doi.org/10.1002/jctb.6496
Open in lab for full controls, parameter editing, and template overlays.
Open in lab