Paper · MFC
Strategies to Boost MFC Power By Supercapacitive Materials and Components
Summary
What the paper reports, in its own words.
Abstract
The low cost, the intrinsic robustness, the low environmental impact combined with the potential integration with the current production processes are some of the strength points that are pushing the research on Microbial Fuel Cells (MFCs) since the last thirty years. Still, to become a technology capable of incisively change the water and energetic landscape critical issues, MFCs needs to be improved for power output and quality. Here we report about three main strategies to address this challenge: i) the enhancement of the oxygen redox reaction at the cathode in the circum-neutral pH environment of MFCs by PGM-free catalysts based on Manganese and/or Iron oxides prepared by fast autocombustion from nitrates and glycols; ii) the exploitation of the inherent capacitive behaviour of the metal (Fe, Mn) oxides cathodes, iii) the smart integration of MFCs with commercial supercapacitors properly sized and connected in order to match short recharge time and high power output. Acknowledgments The research has been carried out under the Italy-South Africa joint Research Programme 2018-2020 Italian Ministers of Foreign Affairs and of the Environment. References Malaie, Keyvan, et al. "Simple preparation of carbon–bimetal oxide nanospinels for high-performance bifunctional oxygen electrocatalysts." New Journal of Chemistry 42.24 (2018): 20156-20162. Francesca Soavi, Keyvan Malaie and Mohammad Reza Ganjal, “Towards low-cost and sustainable supercapacitor electrode processing simultaneous carbon grafting and coating of mixed-valence metal oxides by fast annealing ”, Frontiers, Accepted manuscript
AI summary: matches the abstract (70% confidence) · review against source PDF
Extracted values
Every value pulled from the paper, with its source, so each number can be checked against the text.
n = 3 extracted values
Select a citation to see the quote, page and confidence behind a value.
0 of 3 extracted rows modelable
- 3 no SI value
| Parameter | Value | Unit | Confidence | Source | Modelable |
|---|---|---|---|---|---|
| Membrane material | CEM | — | 80% | extracted | Excluded: no SI value |
| pH | circum-neutral | — | 50% | extracted | Excluded: no SI value |
| Cathode material | Manganese and/or Iron oxides | — | 50% | extracted | Excluded: no SI value |
Methodology
What was the system and how was it run
Methodology
Methodology
The authors employed three strategies to enhance MFC power output: using PGM-free catalysts based on Manganese and/or Iron oxides for oxygen redox reaction enhancement, and exploiting supercapacitive materials and components.
System configuration
| Field | Value |
|---|---|
| system type | MFC |
Experimental conditions
| Field | Value |
|---|---|
| p h | 7 |
Pipeline
Raw extractions, artifacts, quality signal
Extraction quality
honesty signalCalibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.
Parameter completeness
25%
Fraction of expected parameters extracted
Data completeness
50%
Overall extraction coverage across fields
AI confidence
70%
Model self-reported confidence
Mean parameter confidence
60%
Average confidence across PaperParameter rows surfaced above
review against source PDF before citing · scores 0–1
Chart explorer
Move the inputs this paper used and see how the predicted outcome shifts.
Explore model
The reactor in 3D, with flow you can switch on and off.
AI insights
Contradictions, gaps and opportunities found by comparing this paper with the corpus.
Compare similar papers
The nearest papers by system, materials and organisms, with their outcomes side by side.
Representative model, generic MFC
Tap to interactRepresentative model, generic MFC
Representative MFC — matched on the paper’s system type only, not its reactor or geometry.
Keywords
- Supercapacitor
- Microbial fuel cell
- Manganese
- Oxide
- Cathode
- Oxygen evolution
Cite
Federico Poli, Matteo Morigi, Jacopo Seri et al. (2019). Strategies to Boost MFC Power By Supercapacitive Materials and Components. ECS Meeting Abstracts. https://doi.org/10.1149/ma2019-04/8/408
- Journal
- ECS Meeting Abstracts
Open in lab for full controls, parameter editing, and template overlays.
Open in lab