Nitrate reduction with biotic and abiotic cathodes at various cell voltages in bioelectrochemical denitrification system

Abstract

Electrochemical treatment of nitrate ions was attempted using different catalysts on the cathode in bioelectrochemical denitrification systems. The carbon cathode coated by biofilm (biocathode) could remove 91 % of nitrate ions at 1.0 V, which was almost same as the Pt-coated electrode (90 %). The exchange current density of biocathode was 0.0083 A/m², which was almost 22 times higher than with an abiotic plain carbon cathode. The formation of intermediate products in nitrate reduction varied depending on the cell voltage. At 0.5 V, a large portion of nitrate was converted to ammonia, but at more increased cell voltage (0.7 and 1 V) a high amount of nitrite ions was found with little ammonia formation in cathodic solution. The maximum nitrate removal rate was 0.204 mg NO₃-N/cm²d by biocathode, while plain carbon paper showed only 0.176 mg NO₃-N/cm²d. Electrochemical analysis of chronoamperometry showed a higher stable current generation for biocathode (3.1 mA) and Pt-coated cathode (2.8 mA) as compared to plain carbon (0.6 mA) at 0.7 V of poised voltage.

Keywords

Identifiers

DOI

10.1007/s00449-012-0779-0

PubMed

22814899

Journal

Bioprocess and Biosystems Engineering

Year

2013