Paper · MFC
Microbial Biocathode Catalyzing Oxygen Reduction and Processing Nitrification
Summary
What the paper reports, in its own words.
Abstract
Oxygen biocathodes with electroactive biofilms on graphite electrodes were developed consistently and reproducibly from wastewater inoculum under a high ammonium content selective pressure in a batch microbial fuel cell configuration using ferrocyanide at the anode. The microbial biocathodes process nitrification reactions and catalyse the reduction of molecular oxygen with an onset potential of 0.0 V vs. Ag /AgCl, and a current density at -0.28 V of j = -296 μA/cm² at pH 7 and 20 °C under oxygen saturation (Cf. Figure).These biofilms also reduce hydrogen peroxide (not shown) at +0.25 V, the potential of an electroactive species in the biofilm (Cf. Figure). The nitrification reactions performed by the biofilm are found to be associated with the catalytic reduction of dioxygen. Nitrification reactions were studied by assaying the nitrogen species (ammonium, nitrite and nitrate) and the effect of adding hydroxylamine, an intermediate of the enzymatic oxidation of ammonium. Metagenomic studies via 16S rRNA gene sequencing of the biofilms onto the colonized electrodes were performed 4 week after inoculation. These studies show that the cathodic biofilms were significantly enriched with Cupriavidus, a proteobacteria genus, that is likely to be responsible for the catalytic properties of the microbial biocathode. The Figure shows the reduction of molecular oxygen by a colonized electrode at pH 7 and 20 °C in a 0.1 M fresh phosphate buffer as recorded with slow scan rate cyclic voltammetry. Scan rate: 1 mV/s. Green: abiotic graphite electrode under oxygen saturation. Black: biocathode under argon saturation. Red: biocathode under air. Blue: biocathode under oxygen saturation. Note also the chemically reversible system found at +0.25 V and assigned to the biofilm. Catalytic hydrogen peroxide reduction (not shown) occurs at the potential of this system. Figure 1
AI summary
70% confidenceThis MFC study oxygen biocathodes with electroactive biofilms on graphite electrodes were developed consistently and reproducibly from wastewater inoculum under a high ammonium content selective pressure in a batch microbial fuel cell configuration using ferrocyanide at the anode. The microbial biocathodes process nitrification reactions and catalyse the reduction of molecular oxygen with an onset potential of 0.
Generated by MESSAI extraction pipeline · review against source PDF
Key findings
- 28 V of j = -296 μA/cm² at pH 7 and 20 °C under oxygen saturation (Cf.
- The Figure shows the reduction of molecular oxygen by a colonized electrode at pH 7 and 20 °C in a 0.
Extracted values
Every value pulled from the paper, with its source, so each number can be checked against the text.
n = 9 extracted values
Select a citation to see the quote, page and confidence behind a value.
0 of 6 extracted rows modelable
- 1 not canonicalised (no canonical slug)
- 5 no SI value
| Parameter | Value | Unit | Confidence | Source | Modelable |
|---|---|---|---|---|---|
| Substrate | wastewater | — | 80% | llm | |
| Temperature | [object Object] | °C | 80% | llm | |
| pH | [object Object] | — | 80% | llm | |
| Inoculum source | under a high ammonium content selective pressure in a batch microbial fuel cell configuration using ferrocyanide at the anode | — | 80% | extracted | Excluded: no SI value |
| Cathode material | biocathode | — | 60% | extracted | Excluded: no SI value |
| Electrode material | graphite | — | 50% | extracted | Excluded: not canonicalised (no canonical slug) |
| Maximum Current Density | 2.96 | mA/m² | 50% | extracted | Excluded: no SI value |
| Cathode material | graphite | — | 50% | extracted | Excluded: no SI value |
| Anode material | ferrocyanide | — | 50% | extracted | Excluded: no SI value |
Methodology
What was the system and how was it run
Methodology
Methodology
The researchers developed microbial biocathodes by inoculating wastewater into a batch microbial fuel cell configuration under high ammonium content selective pressure, using ferrocyanide at the anode.
System configuration
| Field | Value |
|---|---|
| system type | MFC |
Electrode specifications
| Field | Value |
|---|---|
| materials | ["graphite"] |
Biological parameters
| Field | Value |
|---|---|
| inoculum source | under a high ammonium content selective pressure in a batch microbial fuel cell configuration using ferrocyanide at the anode |
| microbial community | genus |
Operational parameters
| Field | Value |
|---|---|
| p h | {"min":7,"max":7,"optimal":7} |
| temperature | {"min":20,"max":20,"optimal":20} |
| substrate | ["wastewater"] |
Pipeline
Raw extractions, artifacts, quality signal
Extraction quality
honesty signalCalibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.
Parameter completeness
50%
Fraction of expected parameters extracted
Data completeness
50%
Overall extraction coverage across fields
AI confidence
70%
Model self-reported confidence
Mean parameter confidence
64%
Average confidence across PaperParameter rows surfaced above
review against source PDF before citing · scores 0–1
Chart explorer
Move the inputs this paper used and see how the predicted outcome shifts.
Explore model
The reactor in 3D, with flow you can switch on and off.
AI insights
Contradictions, gaps and opportunities found by comparing this paper with the corpus.
Compare similar papers
The nearest papers by system, materials and organisms, with their outcomes side by side.
Representative model, generic MFC
Tap to interactRepresentative model, generic MFC
Representative MFC — matched on the paper’s system type only, not its reactor or geometry.
Keywords
- Microbial fuel cell
- Biofilm
- Inorganic chemistry
- Nitrification
Cite
Frédéric Barrière, Thomas Flinois (2020). Microbial Biocathode Catalyzing Oxygen Reduction and Processing Nitrification. ECS Meeting Abstracts. https://doi.org/10.1149/ma2020-01472686mtgabs
- Journal
- ECS Meeting Abstracts
Open in lab for full controls, parameter editing, and template overlays.
Open in lab