Research

Paper · MES

3D bioprinting on cathodes in microbial electrosynthesis for increased acetate production rate using Sporomusa ovata

01

Summary

What the paper reports, in its own words.

3D Interactive Model

Abstract

Microbial Electrosynthesis (MES) is emerging as a promising technology for the decarbonization of the economy. The use of CO2 as a feedstock, i.e. through carbon capture and utilization, can create attractive business opportunities for the production of third generation biofuels. Achieving highly efficient electron transfer from the cathode to microbes is one of the main challenges hindering the development of MES reactors. It is, therefore, essential to improve biofilm growth for enhanced electron-transfer during bioconversion. In this study we show the first use of 3D bio-printing for microbial electrosynthesis systems, creating a “synthetic biofilm”, containing Sporomusa ovata. The synthetic biofilm greatly improves the acetate production rate while drastically decreasing start-up time. Using H-cell reactors, poised at −0.8 V vs Ag/AgCl, with a synthetic biofilm printed on a carbon cloth electrode, an average acetate productivity of 47±5.1 g day⁻¹ m⁻² (0.31±0.55 g L⁻¹ day⁻¹) with a maximum productivity of 104 g day1 m−2 (0.68 g L⁻¹⋅day⁻¹) was achieved. This is an order of magnitude higher than typical S. ovata production rates, and 2–3 fold higher than reactors using specialized cathodes. Start-up of MES reactors typically require days, whereas a high production rate was achieved almost directly after the start-up (±40 h) using the synthetic biofilm. Cyclic voltammetry data showed H2 formation occurred at much higher potentials than in the control reactors, (approx. −550 mV vs. −950 mV for controls). Imaging showed that the synthetic biofilm allowed for dense growth of S. ovata cells at the cathode, increasing electron transfer efficiency and potentially improving the bio-catalyzation of H2.

02

Extracted values

Every value pulled from the paper, with its source, so each number can be checked against the text.

Not yet extracted

This paper is queued for the MESSAI extraction pipeline. Experiment conditions, performance metrics, and structured parameters will appear here once it has been processed — check back, or open the original PDF above to read it now.

03

Chart explorer

Move the inputs this paper used and see how the predicted outcome shifts.

04

Explore model

The reactor in 3D, with flow you can switch on and off.

05

AI insights

Contradictions, gaps and opportunities found by comparing this paper with the corpus.

06

Compare similar papers

The nearest papers by system, materials and organisms, with their outcomes side by side.

loading 3D model…

Representative model, generic microbial electrochemical system

Representative microbial electrochemical system — matched on the paper’s system type only, not its reactor or geometry.

MES
System
0
Extracted values
2021
Year

In this record

Organisms, parameters and materials this paper reports. Each links to its page.

Organisms · 1

Keywords

  • Electrosynthesis
  • Cathode
  • Production rate
  • 3D bioprinting
  • Chemical engineering

Cite

Adolf Krige, Ulrika Rova, Paul Christakopoulos (2021). 3D bioprinting on cathodes in microbial electrosynthesis for increased acetate production rate using Sporomusa ovata. Journal of environmental chemical engineering. https://doi.org/10.1016/j.jece.2021.106189

Open in lab for full controls, parameter editing, and template overlays.

Open in lab