Paper · MES
Enhanced microbial electrosynthesis by using defined co-cultures
Summary
What the paper reports, in its own words.
Abstract
Microbial uptake of free cathodic electrons presents a poorly understood aspect of microbial physiology. Uptake of cathodic electrons is particularly important in microbial electrosynthesis of sustainable fuel and chemical precursors using only CO 2 and electricity as carbon, electron and energy source. Typically, large overpotentials (200 to 400 mV) were reported to be required for cathodic electron uptake during electrosynthesis of, for example, methane and acetate, or low electrosynthesis rates were observed. To address these limitations and to explore conceptual alternatives, we studied defined co-cultures metabolizing cathodic electrons. The Fe(0)-corroding strain IS4 was used to catalyze the electron uptake reaction from the cathode forming molecular hydrogen as intermediate, and Methanococcus maripaludis and Acetobacterium woodii were used as model microorganisms for hydrogenotrophic synthesis of methane and acetate, respectively. The IS4-M. maripaludis co-cultures achieved electromethanogenesis rates of 0.1-0.14 μmol cm -2 h -1 at -400 mV vs standard hydrogen electrode and 0.6-0.9 μmol cm -2 h -1 at -500 mV. Co-cultures of strain IS4 and A. woodii formed acetate at rates of 0.21-0.23 μmol cm -2 h -1 at -400 mV and 0.57-0.74 μmol cm -2 h -1 at -500 mV. These data show that defined co-cultures coupling cathodic electron uptake with synthesis reactions via interspecies hydrogen transfer may lay the foundation for an engineering strategy for microbial electrosynthesis.
Extracted values
Every value pulled from the paper, with its source, so each number can be checked against the text.
n = 16 extracted values
Select a citation to see the quote, page and confidence behind a value.
0 of 16 extracted rows modelable
- 5 not canonicalised (no canonical slug)
- 9 no SI value
- 2 verifier rejected the value
| Parameter | Value | Unit | Confidence | Source | Notes | Modelable |
|---|---|---|---|---|---|---|
| Current Density | 0.9 | μmol electrons cm⁻² h −1 | 90% | extracted | "At −400 mV cathode potential this led to a small increase in current consumption…" · T=30°C, substrate=H2 and CO2, steady_state | Excluded: no SI value |
| Current Density | 0.005 | μmol electrons cm −2 h −1 | 90% | extracted | "No product formation was detected in un-inoculated controls or with an axenic M.…" · T=30°C, substrate=H2 and CO2, steady_state | Excluded: no SI value |
| Coulombic efficiency×2 | 100 | % | 90% | extracted | "strain IS4 formed hydrogen from cathodic electrons at a coulombic efficiency of …" · T=30°C, substrate=H2 and CO2 | Excluded: verifier rejected the value |
| CH₄ Production Rate | 0.6 | μmol cm⁻² h −1 | 90% | extracted | "Lowering the cathode potential from −400 to −500 mV increased the rates of metha…" · T=30°C, substrate=H2 and CO2, steady_state | Excluded: no SI value |
| Acetate Production Rate | 0.21 | μmol cm −2 h −1 | 90% | extracted | "acetate was produced after a lag-phase at rates of 0.21–0.23 μmol cm −2 h −1" · T=30°C, substrate=H2 and CO2, steady_state | Excluded: no SI value |
| CH₄ Production Rate | 0.1 | μmol cm⁻² h −1 | 90% | extracted | "At −400 mV cathode potential this led to a small increase in current consumption…" · T=30°C, substrate=H2 and CO2, steady_state | Excluded: no SI value |
| Hydrogen formation rate | 0.08 | μmol h⁻¹ cm⁻² | 90% | extracted | "rates of molecular hydrogen accumulation increased to ca. 0.2 μmol h −1 cm −2 re…" · T=30°C, substrate=H2 and CO2 | Excluded: not canonicalised (no canonical slug) |
| H₂ Production Rate | 0.14 | μmol cm −2 h −1 | 90% | extracted | "hydrogen evolution rates obtained with platinum foil (0.002 μmol cm −2 h −1 at −…" · T=30°C, substrate=H2 and CO2, steady_state | Excluded: no SI value |
| Hydrogen formation rate | 0.2 | μmol h⁻¹ cm⁻² | 90% | extracted | "rates of molecular hydrogen accumulation increased to ca. 0.2 μmol h −1 cm −2 re…" · T=30°C, substrate=H2 and CO2, steady_state | Excluded: not canonicalised (no canonical slug) |
| Hydrogen formation rate | 0.4 | μmol cm⁻² h −1 | 90% | extracted | "hydrogen was formed at rates of 0.4–0.5 μmol cm−2 h −1 at a cathode potential of…" · T=30°C, substrate=H2 and CO2, steady_state | Excluded: not canonicalised (no canonical slug) |
| CH₄ Production Rate | 0.6 | μmol cm⁻² h −1 | 90% | extracted | "a further decrease in potential to −600 mV did only result in a small increase i…" · T=30°C, substrate=H2 and CO2, steady_state | Excluded: no SI value |
| Hydrogen formation rate | 4 | μmol cm⁻² h −1 | 90% | extracted | "Hydrogen formation rates increased by one order of magnitude to 4–7 μmol cm −2 h…" · T=30°C, substrate=H2 and CO2, steady_state | Excluded: not canonicalised (no canonical slug) |
| Hydrogen formation rate | 4 | μmol cm⁻² h −1 | 90% | extracted | "a further decrease in potential did not result in a significant change of hydrog…" · T=30°C, substrate=H2 and CO2, steady_state | Excluded: not canonicalised (no canonical slug) |
| H₂ Production Rate | 0.002 | μmol cm −2 h −1 | 90% | extracted | "hydrogen evolution rates obtained with platinum foil (0.002 μmol cm −2 h −1 at −…" · T=30°C, substrate=H2 and CO2, steady_state | Excluded: no SI value |
| Acetate Production Rate | 0.57 | μmol cm −2 h −1 | 90% | extracted | "Upon changing the potential to −500 mV, current consumption as well as rate of a…" · T=30°C, substrate=H2 and CO2, steady_state | Excluded: no SI value |
Methodology
What was the system and how was it run
Operating conditions
2 runs extracted| Run | T°C | pHan | pHcat | Substrate | [S]mg/L | HRTh | Mode | R_extΩ | V_appV | Inoculum |
|---|---|---|---|---|---|---|---|---|---|---|
| v2-746db5ece60c956f | 30 | — | — | H2 and CO2 | — | — | — | — | — | — |
| v2-fcf2624761827015 | 30 | — | — | H2 and CO2 | — | — | steady_state | — | — | — |
Pipeline
Raw extractions, artifacts, quality signal
Extraction quality
honesty signalCalibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.
AI confidence
60%
Model self-reported confidence
Mean parameter confidence
90%
Average confidence across PaperParameter rows surfaced above
review against source PDF before citing · scores 0–1
Chart explorer
Move the inputs this paper used and see how the predicted outcome shifts.
Explore model
The reactor in 3D, with flow you can switch on and off.
AI insights
Contradictions, gaps and opportunities found by comparing this paper with the corpus.
Compare similar papers
The nearest papers by system, materials and organisms, with their outcomes side by side.
Source PDF
The paper as published.
Representative model, generic microbial electrochemical system
Tap to interactRepresentative model, generic microbial electrochemical system
Representative microbial electrochemical system — matched on the paper’s system type only, not its reactor or geometry.
In this record
Organisms, parameters and materials this paper reports. Each links to its page.
Organisms · 2
Keywords
- Electrosynthesis
- Microbial fuel cell
- Methanococcus
- Cathodic protection
- Cathode
- Electron transfer
Cite
Jörg S. Deutzmann, Alfred M. Spormann (2016). Enhanced microbial electrosynthesis by using defined co-cultures. The ISME Journal. https://doi.org/10.1038/ismej.2016.149
- PubMed
- 27801903
- Journal
- The ISME Journal
Open in lab for full controls, parameter editing, and template overlays.
Open in lab