Paper · MES
Effect of tungstate on acetate and ethanol production by the electrosynthetic bacterium Sporomusa ovata
Summary
What the paper reports, in its own words.
Abstract
This study presented here shows that optimization of microbial catalyst growth medium can improve productivity and lead to the biosynthesis of different products by gas fermentation and MES. It also provides insights on the metabolism of biofuels production in acetogens and demonstrates that S. ovata has an important untapped metabolic potential for the production of other chemicals than acetate via CO2-converting bioprocesses including MES.
Extracted values
Every value pulled from the paper, with its source, so each number can be checked against the text.
n = 132 extracted values
Select a citation to see the quote, page and confidence behind a value.
30 of 132 extracted rows modelable
- 24 not canonicalised (no canonical slug)
- 78 no SI value
| Parameter | Value | Unit | Confidence | Source | Notes | Modelable |
|---|---|---|---|---|---|---|
| fdhA2 transcript abundance fold change×2 | 3.3 | fold | 95% | rt-qpcr | "Transcript abundance of fdhA2 was increased 3.3 ± 0.2-fold when tungstate concen…" · T=30°C, pH(an)=7.3, substrate=H2:CO2, startup | Excluded: not canonicalised (no canonical slug) |
| Cathode Potential×2 | -0.69 | V | 95% | extracted | "The cathode potential was set at −690 mV versus SHE with a potentiostat" · condition_hint=MES reactor operating parameter, electrode_material=graphite stick, applied_potential_v=-0.69 | Modelable |
| Doubling Time×2 | 30.9 | h | 95% | optical density measurement | "Doubling time (h) 0× 30.90 ± 0.60" · T=30°C, pH(an)=7.3, substrate=H2:CO2 | Modelable |
| Doubling Time×2 | 28 | h | 95% | optical density measurement | "Doubling time (h) 50× 28.03 ± 0.35" · T=30°C, pH(an)=7.3, substrate=H2:CO2 | Modelable |
| Doubling Time×2 | 28.5 | h | 95% | optical density measurement | "Doubling time (h) 10× 28.52 ± 0.53" · T=30°C, pH(an)=7.3, substrate=H2:CO2 | Modelable |
| aor4 transcript abundance fold change×2 | 14.3 | fold | 95% | rt-qpcr | "aor4 and mop2 were also upregulated by 14.3 ± 5.6-fold and 3.8 ± 0.4-fold, respe…" · T=30°C, pH(an)=7.3, substrate=H2:CO2, startup | Excluded: not canonicalised (no canonical slug) |
| mop2 transcript abundance fold change×2 | 3.8 | fold | 95% | rt-qpcr | "aor4 and mop2 were also upregulated by 14.3 ± 5.6-fold and 3.8 ± 0.4-fold, respe…" · T=30°C, pH(an)=7.3, substrate=H2:CO2, startup | Excluded: not canonicalised (no canonical slug) |
| Propionate to 1-propanol conversion efficiency fold increase×2 | 1.6 | fold | 95% | gc-fid | "When 10× more tungstate was present in the medium, conversion efficiency was inc…" · T=30°C, pH(an)=7.3, substrate=H2:CO2 with 5 mM propionate, steady_state | Excluded: not canonicalised (no canonical slug) |
| 1-butanol final concentration×2 | 1.08 | mM | 95% | gc-fid | "Final concentration (mM) 1-butanol 10× 1.08 ± 0.06" · T=30°C, pH(an)=7.3, substrate=H2:CO2 with 5 mM butyrate, steady_state | Excluded: not canonicalised (no canonical slug) |
| Butyrate to 1-butanol conversion efficiency fold increase×2 | 1.3 | fold | 95% | gc-fid | "Similarly, a higher conversion of butyric acid to 1-butanol was observed with de…" · T=30°C, pH(an)=7.3, substrate=H2:CO2 with 5 mM butyrate, steady_state | Excluded: not canonicalised (no canonical slug) |
| Tungstate concentration (standard 311 medium)×2 | 0.01 | µM | 95% | extracted | "Na2WO4·2H2O 0.01" · condition_hint=standard 311 medium composition | Excluded: not canonicalised (no canonical slug) |
| Reactor Volume×2 | 300 | ml | 95% | extracted | "The cathodic chamber and the anodic chamber were filled with a final volume of 3…" · condition_hint=MES reactor design parameter | Modelable |
| 1-propanol final concentration×2 | 1.65 | mM | 95% | gc-fid | "Final concentration (mM) 1-propanol 10× 1.65 ± 0.14" · T=30°C, pH(an)=7.3, substrate=H2:CO2 with 5 mM propionate, steady_state | Excluded: not canonicalised (no canonical slug) |
| 1-propanol final concentration×2 | 1.03 | mM | 95% | gc-fid | "Final concentration (mM) 1-propanol 1× 1.03 ± 0.20" · T=30°C, pH(an)=7.3, substrate=H2:CO2 with 5 mM propionate, steady_state | Excluded: not canonicalised (no canonical slug) |
| 1-butanol final concentration×2 | 0.81 | mM | 95% | gc-fid | "Final concentration (mM) 1-butanol 1× 0.81 ± 0.13" · T=30°C, pH(an)=7.3, substrate=H2:CO2 with 5 mM butyrate, steady_state | Excluded: not canonicalised (no canonical slug) |
| aor1-2 transcript abundance fold change×2 | 30.4 | fold | 95% | rt-qpcr | "In the presence of 10× tungstate, transcript abundance of aor1–2 was significant…" · T=30°C, pH(an)=7.3, substrate=H2:CO2, startup | Excluded: not canonicalised (no canonical slug) |
| Faradaic Efficiency×2 | 20.6 | % | 95% | gc-fid | "Conversion efficiency (%) Propionate to 1-propanol 1× 20.64 ± 4.14" · T=30°C, pH(an)=7.3, substrate=H2:CO2 with 5 mM propionate, steady_state | Modelable |
| Conversion Efficiency×2 | 16.3 | % | 95% | gc-fid | "Conversion efficiency (%) Butyrate to 1-butanol 1× 16.32 ± 2.79" · T=30°C, pH(an)=7.3, substrate=H2:CO2 with 5 mM butyrate, steady_state | Modelable |
| Doubling Time×2 | 28.8 | h | 95% | optical density measurement | "Doubling time (h) 5× 28.77 ± 0.92" · T=30°C, pH(an)=7.3, substrate=H2:CO2 | Modelable |
| Electrode Surface Area×4 | 36 | cm² | 95% | extracted | "Both the anode (36 cm2), and the cathode (36 cm2) were graphite sticks suspended…" · condition_hint=MES reactor design parameter, electrode_material=graphite stick | Modelable |
| Acetate Production Rate×2 | 3.61 | mmol gCD W⁻¹ d⁻¹ | 95% | hplc | "Production rate (mmol gCD W−1 d−1) Acetate 1× 3.61 ± 0.14" · T=30°C, pH(an)=7.3, substrate=H2:CO2, steady_state | Excluded: no SI value |
| Formic Acid Production Rate×2 | 0.41 | mmol gCD W⁻¹ d⁻¹ | 95% | gc-fid | "Production rate (mmol gCD W−1 d−1) Ethanol 1× 0.41 ± 0.11" · T=30°C, pH(an)=7.3, substrate=H2:CO2, steady_state | Excluded: no SI value |
| Acetate Production Rate×2 | 4.16 | mmol gCD W⁻¹ d⁻¹ | 95% | hplc | "Production rate (mmol gCD W−1 d−1) Acetate 0× 4.16 ± 0.02" · T=30°C, pH(an)=7.3, substrate=H2:CO2, steady_state | Excluded: no SI value |
| Acetate Production Rate×2 | 3.2 | mmol gCD W⁻¹ d⁻¹ | 95% | hplc | "Production rate (mmol gCD W−1 d−1) Acetate 10× 3.20 ± 0.22" · T=30°C, pH(an)=7.3, substrate=H2:CO2, steady_state | Excluded: no SI value |
| Acetate Production Rate×2 | 3.55 | mmol gCD W⁻¹ d⁻¹ | 95% | hplc | "Production rate (mmol gCD W−1 d−1) Acetate 100× 3.55 ± 0.23" · T=30°C, pH(an)=7.3, substrate=H2:CO2, steady_state | Excluded: no SI value |
Methodology
What was the system and how was it run
Operating conditions
11 runs extracted| Run | T°C | pHan | pHcat | Substrate | [S]mg/L | HRTh | Mode | R_extΩ | V_appV | Inoculum |
|---|---|---|---|---|---|---|---|---|---|---|
| v2-3dc88d222e3ed044 | 25 | — | — | CO2 | — | — | steady_state | — | -0.69 | — |
| v2-70d7499a675f0871 | 30 | 7.3 | — | H2:CO2 | — | — | startup | — | — | — |
| v2-86347811c38afbfc | 30 | 7.3 | — | H2:CO2 | — | — | steady_state | — | — | — |
| v2-9aeea3406a5d050f | 30 | 7.3 | — | H2:CO2 with 5 mM butyrate | 5000 | — | steady_state | — | — | — |
| v2-9e715f3576445e46 | 25 | — | — | — | 10000 | — | — | — | — | — |
| v2-aa7d867e68867e07 | 30 | 4.8 | — | H2:CO2 | — | — | steady_state | — | — | — |
| v2-bfa25cdb6fe5e053 | — | — | — | — | — | — | — | — | -0.69 | — |
| v2-d1ebbc21c41069b6 | 30 | 7.3 | — | H2:CO2 | — | — | — | — | — | — |
| v2-d55d9d6660cba025 | 30 | 7.3 | — | H2:CO2 with 5 mM propionate | 5000 | — | steady_state | — | — | — |
| v2-eeefa5a59d768342 | 25 | 7.3 | — | co2 | 5000 | — | steady_state | — | -0.69 | — |
| v2-f586e9af22985397 | — | — | — | — | — | — | — | — | — | — |
Pipeline
Raw extractions, artifacts, quality signal
Extraction quality
honesty signalCalibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.
AI confidence
60%
Model self-reported confidence
Mean parameter confidence
95%
Average confidence across PaperParameter rows surfaced above
review against source PDF before citing · scores 0–1
Chart explorer
Move the inputs this paper used and see how the predicted outcome shifts.
Explore model
The reactor in 3D, with flow you can switch on and off.
AI insights
Contradictions, gaps and opportunities found by comparing this paper with the corpus.
Compare similar papers
The nearest papers by system, materials and organisms, with their outcomes side by side.
Source PDF
The paper as published.
Representative model, generic microbial electrochemical system
Tap to interactRepresentative model, generic microbial electrochemical system
Representative microbial electrochemical system — matched on the paper’s system type only, not its reactor or geometry.
In this record
Organisms, parameters and materials this paper reports. Each links to its page.
Organisms · 1
Keywords
- Tungstate
- Bacteria
- Ethanol
- Ethanol fuel
- Biotechnology
- Microbiology
Cite
Fariza Ammam, Pier‐Luc Tremblay, Dawid Mariusz Lizak et al. (2016). Effect of tungstate on acetate and ethanol production by the electrosynthetic bacterium Sporomusa ovata. Biotechnology for Biofuels. https://doi.org/10.1186/s13068-016-0576-0
- PubMed
- 27493685
- Journal
- Biotechnology for Biofuels
Open in lab for full controls, parameter editing, and template overlays.
Open in lab