Generic MFCRepresentative model
Click to animate flow
loading 3D model…

Representative MFC — matched on the paper’s system type only, not its reactor or geometry.

Extraction

Reported parameters

No values extracted from this paper yet.

Open in lab for full controls, parameter editing, and template overlays.

Open in lab →

What they did

System
MFC

What worked

No outcome metrics extracted yet.

Abstract

To construct a simultaneous nitrification and denitrification-microbial fuel cell (SND-MFC) reactor for stable electricity generation, a heterotrophic nitrification-aerobic denitrification strain was isolated and purified from aerobic activated sludge from a sewage treatment plant. The strain with an optimal nitrogen removal performance, which was identified as Pseudomonas , was inoculated into the SND-MFC as a single strain. Different electrode materials and electrode distances (EDs) were investigated. The results showed that a maximum ammonium removal rate of 92.31% and a maximum power density of 134.28 mW/m 3 were obtained by the SND-MFC using graphene film as the electrodes material. Decreasing the ED did not significantly improved the power generation performance of the pure strain SND-MFC at the initial stage. When the electrode distance of the SND-MFC was 4 cm, the best generation efficiency was achieved with a maximum power density of 151.84 mW/m 3 .

Keywords

Microbial fuel cellDenitrificationHeterotrophNitrificationAerobic denitrificationActivated sludge

Identifiers

PubMed
34346854
Journal
Environmental Technology
Year
2021