Paper · MFC
Performance and adsorption mechanism of microbial fuel cells in treating industrial wastewater with high salt and nitrogen content.
Summary
What the paper reports, in its own words.
Abstract
Inorganic salts and nitrogen compounds are prevalent in wastewater from chemical, pharmaceutical, and petrochemical industries. Nitrogen-containing wastewater in high-salt environments was treated in an anaerobic fluidised bed microbial fuel cell (AFB-MFC) with carbon brush biofilm anodes and macroporous adsorption resin (MAR) as a multifunctional biofilm carrier. During the experiment, the DO value of the influent was maintained between 0.2-0.5 mg/L, and the nitrogen concentrations in the influent were 0.3, 0.5, and 1.0 g/L, respectively. Materials Studio (MS) software was used to construct nitrogen-containing compounds and MAR models. The simulation result indicated that MAR exhibited the best adsorption performance on nitrite nitrogen, with an adsorption heat of 117.7985 kJ/mol. MAR effectively removes nitrogen-containing compounds through van der Waals forces and hydrogen bonding interactions. The simulation closely matched experimental results, with a high R² (>0.99) indicating strong regression significance. The highest removal efficiency of ammonia nitrogen, nitrite nitrogen, and nitrate nitrogen was 97.97 ± 0.97%, 98.81 ± 1%, and 99 ± 0.47%, respectively. The results showed that the desalination efficiency was 55%, 41.5%, and 27% at salinities of 10, 20, and 30 g/L, respectively. The maximum output voltage and power density achieved using carbon brush as biofilm anodes in the AFB-MFC were 651.34 mV and 174.97 mW/m², respectively. The high-throughput sequencing analysis results revealed a significant relative abundance of the dominant electroactive bacteria present on the carbon brush, such as Proteobacteria , Firmicutes , Bacteroidota , and Chloroflexi , and also identified such superior denitrification bacteria as Citrobacter , Corynebacterium , Pseudomonas , and Castellaniella etc.
AI summary: matches the abstract (75% confidence) · review against source PDF
Extracted values
Every value pulled from the paper, with its source, so each number can be checked against the text.
n = 6 extracted values
Select a citation to see the quote, page and confidence behind a value.
0 of 6 extracted rows modelable
- 2 not canonicalised (no canonical slug)
- 4 no SI value
| Parameter | Value | Unit | Confidence | Source | Modelable |
|---|---|---|---|---|---|
| Dominant organism | Pseudomonas | — | 80% | extracted | Excluded: not canonicalised (no canonical slug) |
| Substrate | wastewater | — | 70% | extracted | Excluded: no SI value |
| Electrode material | carbon brush | — | 50% | extracted | Excluded: not canonicalised (no canonical slug) |
| Substrate | industrial wastewater with high salt and nitrogen content | — | 50% | extracted | Excluded: no SI value |
| Maximum power density | 175 | mW/m² | 50% | extracted | Excluded: no SI value |
| Anode material | carbon brush | — | 50% | extracted | Excluded: no SI value |
Methodology
What was the system and how was it run
Methodology
Methodology
The study used an anaerobic fluidised bed microbial fuel cell with carbon brush biofilm anodes and macroporous adsorption resin, and molecular dynamics simulations with Materials Studio software to investigate the adsorption mechanism.
Electrode specifications
| Field | Value |
|---|---|
| materials | ["carbon brush"] |
Biological parameters
| Field | Value |
|---|---|
| dominant species | ["Pseudomonas"] |
Operational parameters
| Field | Value |
|---|---|
| substrate | ["wastewater"] |
Pipeline
Raw extractions, artifacts, quality signal
Extraction quality
honesty signalCalibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.
Parameter completeness
50%
Fraction of expected parameters extracted
Data completeness
50%
Overall extraction coverage across fields
AI confidence
75%
Model self-reported confidence
Mean parameter confidence
58%
Average confidence across PaperParameter rows surfaced above
review against source PDF before citing · scores 0–1
Chart explorer
Move the inputs this paper used and see how the predicted outcome shifts.
Explore model
The reactor in 3D, with flow you can switch on and off.
AI insights
Contradictions, gaps and opportunities found by comparing this paper with the corpus.
Compare similar papers
The nearest papers by system, materials and organisms, with their outcomes side by side.
Representative model, generic MFC
Tap to interactRepresentative model, generic MFC
Representative MFC — matched on the paper’s system type only, not its reactor or geometry.
Keywords
- Anaerobic fluidised bed microbial fuel cell
- high-salt nitrogenous wastewater
- macroporous adsorption resin
- microbial community analysis
- molecular dynamics simulations
Cite
(2025). Performance and adsorption mechanism of microbial fuel cells in treating industrial wastewater with high salt and nitrogen content. Environmental technology. https://doi.org/40551089
- DOI
- 40551089
- PubMed
- 40551089
- Journal
- Environmental technology
Open in lab for full controls, parameter editing, and template overlays.
Open in lab