Paper
Upgrading Potential of Waste Fermentation-Based C4-C5-C6 Carboxylic Acid Mixtures using Electrochemical Oxidative Decarboxylation
Summary
What the paper reports, in its own words.
Abstract
Electrochemical upgrading techniques could provide a powerful tool to complement biorefineries processing waste materials, thereby making progress towards the electrification of these platforms. Among them, (non)-Kolbe electrolysis, that is, electrochemically driven oxidative decarboxylation of carboxylic acids, plays a key role as its product palette consists of alkanes (Kolbe products) as well as competing non-Kolbe products, including short-chain alkenes, alcohols, esters, ketones and aldehydes. The formation of alkanes takes place via the dimerization of radicals after the decarboxylation of carboxylic acids and requires relatively high acid concentrations (> 0.5 M) and a high current (> 200 mA cm⁻²). In this work, the upgrading potential of VFA mixtures of C4-C5-C6 acids under conditions representing real waste-based fermentation effluents (lower VFA concentrations) and a suboptimal current density (100 mA cm⁻²) was investigated. In addition, the effect of the initial VFA concentration ratios and the operation time (Faraday equivalents of FE = 0.25 and 1.0) on product selectivity and yields was studied. It was shown that mostly non-Kolbe products were formed – namely alcohols, esters and smaller amounts of ketones – in both experiments. An extended operation time favored ester and ketone formation, while alkanes (octane, nonane and decane) were presumably produced at the beginning of the electrolysis, since the process duration did not influence their yields. In addition, since butyric acid – the compound with the highest concentration in both model solutions – participated mostly in alcohol and ester formation, no butyrate radical dimerization (resulting in hexane) was observed. The results indicate that by not concentrating the VFAs in the fermentation effluents (via e.g. electrodialysis), the oxidative decarboxylation of VFAs at low/moderate current densities will likely result in non-Kolbe products.
Extracted values
Every value pulled from the paper, with its source, so each number can be checked against the text.
n = 42 extracted values
Select a citation to see the quote, page and confidence behind a value.
0 of 42 extracted rows modelable
- 42 not canonicalised (no canonical slug)
| Parameter | Value | Unit | Confidence | Source | Notes | Modelable |
|---|---|---|---|---|---|---|
| Initial valeric acid (C5) concentration in experiment A | 0.11 | M | 95% | extracted | "The applied ratios of initial concentrations of C4:C5:C6 acids were 0.23:0.11:0.…" · ph=7, cell=100 mL glass bottle reactor, 80 mL solution, time=83 mins, acids=["butyric acid","valeric acid","caproic acid"] | Excluded: not canonicalised (no canonical slug) |
| Initial butyric acid (C4) concentration in experiment A | 0.23 | M | 95% | extracted | "The applied ratios of initial concentrations of C4:C5:C6 acids were 0.23:0.11:0.…" · ph=7, cell=100 mL glass bottle reactor, 80 mL solution, time=83 mins, acids=["butyric acid","valeric acid","caproic acid"] | Excluded: not canonicalised (no canonical slug) |
| Current density (galvanostatic) | 100 | mA cm⁻² | 95% | extracted | "ensuring a fixed current density of j = 100 mA cm-2" · ph=7, acids=["butyric acid","valeric acid","caproic acid"], electrode=Pt plate, 2 cm2 each | Excluded: not canonicalised (no canonical slug) |
| Transferred charge in experiment A | 1,000 | C | 95% | extracted | "In experiment A, the operation time was limited by the transfer of charge of Q =…" · ph=7, cell=100 mL glass bottle reactor, 80 mL solution, time=83 mins, acids=["butyric acid","valeric acid","caproic acid"] | Excluded: not canonicalised (no canonical slug) |
| Transferred charge in experiment B | 4,000 | C | 95% | extracted | "In experiment B, the transferred charge was Q = 4000 C corresponding to t = 333 …" · ph=7, cell=80 mL heart-shaped borosilicate glass reactor, 60 mL solution, time=333 mins, acids=["butyric acid","valeric acid","caproic acid"] | Excluded: not canonicalised (no canonical slug) |
| Operation time in experiment A | 83 | mins | 95% | extracted | "In experiment A, the operation time was limited by the transfer of charge of Q =…" · ph=7, cell=100 mL glass bottle reactor, 80 mL solution, time=83 mins, acids=["butyric acid","valeric acid","caproic acid"] | Excluded: not canonicalised (no canonical slug) |
| Initial caproic acid (C6) concentration in experiment B | 0.077 | M | 95% | extracted | "The applied ratios of initial concentrations of C4:C5:C6 acids were 0.23:0.11:0.…" · ph=7, cell=80 mL heart-shaped borosilicate glass reactor, 60 mL solution, time=333 mins, acids=["butyric acid","valeric acid","caproic acid"] | Excluded: not canonicalised (no canonical slug) |
| Operation time in experiment B | 333 | mins | 95% | extracted | "In experiment B, the transferred charge was Q = 4000 C corresponding to t = 333 …" · ph=7, cell=80 mL heart-shaped borosilicate glass reactor, 60 mL solution, time=333 mins, acids=["butyric acid","valeric acid","caproic acid"] | Excluded: not canonicalised (no canonical slug) |
| Initial valeric acid (C5) concentration in experiment B | 0.04 | M | 95% | extracted | "The applied ratios of initial concentrations of C4:C5:C6 acids were 0.23:0.11:0.…" · ph=7, cell=80 mL heart-shaped borosilicate glass reactor, 60 mL solution, time=333 mins, acids=["butyric acid","valeric acid","caproic acid"] | Excluded: not canonicalised (no canonical slug) |
| Surface area of each Pt plate electrode | 2 | cm² | 95% | extracted | "two Pt plate electrodes with a surface area of 2 cm2 each" · electrode=Pt plate, current_density=100 mA cm-2 | Excluded: not canonicalised (no canonical slug) |
| Initial caproic acid (C6) concentration in experiment A | 0.083 | M | 95% | extracted | "The applied ratios of initial concentrations of C4:C5:C6 acids were 0.23:0.11:0.…" · ph=7, cell=100 mL glass bottle reactor, 80 mL solution, time=83 mins, acids=["butyric acid","valeric acid","caproic acid"] | Excluded: not canonicalised (no canonical slug) |
| Model VFA solution volume in experiment A | 80 | mL | 95% | extracted | "Kolbe electrolysis was carried out in a 100 mL customized Schott laboratory glas…" · ph=7, cell=100 mL glass bottle reactor, 80 mL solution, time=83 mins, acids=["butyric acid","valeric acid","caproic acid"] | Excluded: not canonicalised (no canonical slug) |
| Reactor volume in experiment A | 100 | mL | 95% | extracted | "Kolbe electrolysis was carried out in a 100 mL customized Schott laboratory glas…" · ph=7, cell=100 mL glass bottle reactor, 80 mL solution, time=83 mins, acids=["butyric acid","valeric acid","caproic acid"] | Excluded: not canonicalised (no canonical slug) |
| Reaction media volume in experiment B | 60 | mL | 95% | extracted | "In experiment B, the reaction took place in an 80 mL heart-shaped borosilicate g…" · ph=7, cell=80 mL heart-shaped borosilicate glass reactor, 60 mL solution, time=333 mins, acids=["butyric acid","valeric acid","caproic acid"] | Excluded: not canonicalised (no canonical slug) |
| Reactor volume in experiment B | 80 | mL | 95% | extracted | "In experiment B, the reaction took place in an 80 mL heart-shaped borosilicate g…" · ph=7, cell=80 mL heart-shaped borosilicate glass reactor, 60 mL solution, time=333 mins, acids=["butyric acid","valeric acid","caproic acid"] | Excluded: not canonicalised (no canonical slug) |
| Solution pH set with NaOH | 7 | — | 95% | extracted | "The pH of the solution was set in both cases at 7 using 5 M NaOH" · ph=7 (adjusted with 5 M NaOH), acids=["butyric acid","valeric acid","caproic acid"], electrode=Pt plate, 2 cm2 each, current_density=100 mA cm-2 | Excluded: not canonicalised (no canonical slug) |
| Share of alcohols among the electrolysis products, experiment B | 52.8 | % | 90% | gc-ms | "when FE = 1.0, alcohols were the dominant products accounting for 52.8%, while e…" · ph=7, cell=80 mL heart-shaped borosilicate glass reactor, 60 mL solution, time=333 mins, acids=["butyric acid","valeric acid","caproic acid"] | Excluded: not canonicalised (no canonical slug) |
| Share of ketones among the electrolysis products, experiment A | 7 | % | 90% | gc-ms | "Esters and alkanes accounted for 11.7 and 3.3%, respectively, moreover, a notabl…" · ph=7, cell=100 mL glass bottle reactor, 80 mL solution, time=83 mins, acids=["butyric acid","valeric acid","caproic acid"] | Excluded: not canonicalised (no canonical slug) |
| Yield of Kolbe dimers (alkanes), experiment B | 3.4 | % | 90% | gc-ms | "Kolbe dimers were formed with yields of only 3.3% and 3.4% for FE = 0.25 and FE …" · ph=7, cell=80 mL heart-shaped borosilicate glass reactor, 60 mL solution, time=333 mins, acids=["butyric acid","valeric acid","caproic acid"] | Excluded: not canonicalised (no canonical slug) |
| Yield of nonane (valeric/caproic acid heterodimer), experiment A | 0.64 | % | 90% | gc-ms | "octane, nonane and decane could be obtained with yields of 1.67, 0.64 and 1.06% …" · ph=7, cell=100 mL glass bottle reactor, 80 mL solution, time=83 mins, acids=["butyric acid","valeric acid","caproic acid"] | Excluded: not canonicalised (no canonical slug) |
| Yield of octane (valeric acid homodimer), experiment A | 1.67 | % | 90% | gc-ms | "octane, nonane and decane could be obtained with yields of 1.67, 0.64 and 1.06% …" · ph=7, cell=100 mL glass bottle reactor, 80 mL solution, time=83 mins, acids=["butyric acid","valeric acid","caproic acid"] | Excluded: not canonicalised (no canonical slug) |
| Yield of Kolbe dimers (alkanes), experiment A | 3.3 | % | 90% | gc-ms | "Kolbe dimers were formed with yields of only 3.3% and 3.4% for FE = 0.25 and FE …" · ph=7, cell=100 mL glass bottle reactor, 80 mL solution, time=83 mins, acids=["butyric acid","valeric acid","caproic acid"] | Excluded: not canonicalised (no canonical slug) |
| Share of esters among the electrolysis products, experiment B | 18 | % | 90% | gc-ms | "when FE = 1.0, alcohols were the dominant products accounting for 52.8%, while e…" · ph=7, cell=80 mL heart-shaped borosilicate glass reactor, 60 mL solution, time=333 mins, acids=["butyric acid","valeric acid","caproic acid"] | Excluded: not canonicalised (no canonical slug) |
| Share of ketones among the electrolysis products, experiment B | 17.8 | % | 90% | gc-ms | "when FE = 1.0, alcohols were the dominant products accounting for 52.8%, while e…" · ph=7, cell=80 mL heart-shaped borosilicate glass reactor, 60 mL solution, time=333 mins, acids=["butyric acid","valeric acid","caproic acid"] | Excluded: not canonicalised (no canonical slug) |
| Yield of octane (valeric acid homodimer), experiment B | 1.64 | % | 90% | gc-ms | "octane, nonane and decane could be obtained with yields of 1.67, 0.64 and 1.06% …" · ph=7, cell=80 mL heart-shaped borosilicate glass reactor, 60 mL solution, time=333 mins, acids=["butyric acid","valeric acid","caproic acid"] | Excluded: not canonicalised (no canonical slug) |
Pipeline
Raw extractions, artifacts, quality signal
Extraction quality
honesty signalCalibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.
Mean parameter confidence
89%
Average confidence across PaperParameter rows surfaced above
review against source PDF before citing · scores 0–1
Chart explorer
Move the inputs this paper used and see how the predicted outcome shifts.
Explore model
The reactor in 3D, with flow you can switch on and off.
AI insights
Contradictions, gaps and opportunities found by comparing this paper with the corpus.
Compare similar papers
The nearest papers by system, materials and organisms, with their outcomes side by side.
Source PDF
The paper as published.
No 3D model is mapped to this paper yet. The values extracted from it are listed under Extracted values.
Keywords
- volatile fatty acids
- electrodialysis
- butyrate
- Kolbe electrolysis
- Faradaic efficiency
- alcohol formation
- carboxylic acids
- ketone formation
Cite
Tamás Rózsenberszki, Katalin Kucsera, Boglárka Bocska et al. (2025). Upgrading Potential of Waste Fermentation-Based C4-C5-C6 Carboxylic Acid Mixtures using Electrochemical Oxidative Decarboxylation. Hungarian Journal of Industry and Chemistry. https://doi.org/10.33927/hjic-2025-14