Research

Paper · MFC

Air breathing cathode-microbial fuel cell with separator based on ionic liquid applied to slaughterhouse wastewater treatment and bio-energy production

01

Summary

What the paper reports, in its own words.

3D Interactive ModelAI Enhanced· 95%

Abstract

BACKGROUND The present work explores the catalytic and electric performance of a microbial fuel cell (MFC) implemented with high chemical oxygen demand (COD) industrial wastewater from Spain. The polymer inclusion membrane based on 70% [MTOA][Cl] IL was used as separator and showed a good efficiency in power production and COD removal. RESULTS Outputs of 72% in COD conversion, 200 mV voltage and 32 mW m⁻³ power density were obtained, demonstrating that slaughterhouse wastewater is a good feedstock for the scale-up of this technology. Furthermore, the effect of the microbial fuel cell on the physical/chemical parameters of the slaughterhouse wastewater was analyzed. The concentration of nitrite, orthophosphate, sulfate and ammonium was reduced by more than half. CONCLUSIONS Air breathing cathode-microbial fuel cells based on polymer ionic liquids inclusion membranes allow the treatment of an industrial and high load slaughterhouse wastewater with good depuration and electrical performance efficiency. © 2016 Society of Chemical Industry

AI summary

95% confidence

MFC research with standard focus on standard. BACKGROUND The present work explores the catalytic and electric performance of a microbial fuel cell (MFC) implemented ...

Generated by MESSAI extraction pipeline · review against source PDF

02

Extracted values

Every value pulled from the paper, with its source, so each number can be checked against the text.

n = 3 extracted values

Select a citation to see the quote, page and confidence behind a value.

0 of 2 extracted rows modelable

  • 2 no SI value
ParameterValueUnitConfidenceSourceModelable
Substratewastewater—80%
llm
Cathode materialair breathing cathode—50%
extracted
Excluded: no SI value
Membrane materialpolymer inclusion membrane based on 70% [MTOA][Cl] IL—50%
extracted
Excluded: no SI value

Methodology

What was the system and how was it run

Methodology

Methodology

The study employed a microbial fuel cell (MFC) with a polymer inclusion membrane based on ionic liquid as a separator to treat slaughterhouse wastewater and generate bio-energy.

Performance metrics

FieldValue
citation count24

Operational parameters

FieldValue
substrate["wastewater"]

Pipeline

Raw extractions, artifacts, quality signal

Extraction quality

honesty signal

Calibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.

Parameter completeness

38%

Fraction of expected parameters extracted

Data completeness

60%

Overall extraction coverage across fields

AI confidence

95%

Model self-reported confidence

Mean parameter confidence

60%

Average confidence across PaperParameter rows surfaced above

review against source PDF before citing · scores 0–1

03

Chart explorer

Move the inputs this paper used and see how the predicted outcome shifts.

04

Explore model

The reactor in 3D, with flow you can switch on and off.

05

AI insights

Contradictions, gaps and opportunities found by comparing this paper with the corpus.

06

Compare similar papers

The nearest papers by system, materials and organisms, with their outcomes side by side.

loading 3D model…

Representative model, generic MFC

Representative MFC — matched on the paper’s system type only, not its reactor or geometry.

MFC
System
3
Extracted values
2017
Year

Keywords

  • Microbial fuel cell
  • Separator (oil production)
  • Chemical oxygen demand
  • Wastewater
  • Industrial wastewater treatment
  • Pulp and paper industry

Cite

Francisco Mateo-Ramírez, H. Addi, F. J. Hernández‐Fernández et al. (2017). Air breathing cathode-microbial fuel cell with separator based on ionic liquid applied to slaughterhouse wastewater treatment and bio-energy production. Journal of Chemical Technology & Biotechnology. https://doi.org/10.1002/JCTB.5045

Open in lab for full controls, parameter editing, and template overlays.

Open in lab