Paper · MFC
Co-occurrence of direct and indirect extracellular electron transfer mechanisms during electroactive respiration in a dissimilatory sulfate reducing bacterium
Summary
What the paper reports, in its own words.
Abstract
Understanding the extracellular electron transfer mechanisms of electroactive bacteria could help determine their potential in microbial fuel cells (MFCs) and their microbial syntrophy with redox-active minerals in natural environments. However, the mechanisms of extracellular electron transfer to electrodes by sulfate-reducing bacteria (SRB) remain underexplored. Here, we utilized double-chamber MFCs with carbon cloth electrodes to investigate the extracellular electron transfer mechanisms of Desulfovibrio vulgaris Hildenborough ( Dv H), a model SRB, under varying lactate and sulfate concentrations using different Dv H mutants. Our MFC setup indicated that Dv H can harvest electrons from lactate at the anode and transfer them to cathode, where Dv H could further utilize these electrons. Patterns in current production compared with variations of electron donor/acceptor ratios in the anode and cathode suggested that attachment of Dv H to the electrode and biofilm density were critical for effective electricity generation. Electron microscopy analysis of Dv H biofilms indicated Dv H utilized filaments that resemble pili to attach to electrodes and facilitate extracellular electron transfer from cell to cell and to the electrode. Proteomics profiling indicated that Dv H adapted to electroactive respiration by presenting more pili- and flagellar-related proteins. The mutant with a deletion of the major pilus-producing gene yielded less voltage and far less attachment to both anodic and catholic electrodes, suggesting the importance of pili in extracellular electron transfer. The mutant with a deficiency in biofilm formation, however, did not eliminate current production indicating the existence of indirect extracellular electron transfer. Untargeted metabolomics profiling showed flavin-based metabolites, potential electron shuttles.IMPORTANCEWe explored the application of Desulfovibrio vulgaris Hildenborough in microbial fuel cells (MFCs) and investigated its potential extracellular electron transfer (EET) mechanism. We also conducted untargeted proteomics and metabolomics profiling, offering insights into how DvH adapts metabolically to different electron donors and acceptors. An understanding of the EET mechanism and metabolic flexibility of Dv H holds promise for future uses including bioremediation or enhancing efficacy in MFCs for wastewater treatment applications.
Extracted values
Every value pulled from the paper, with its source, so each number can be checked against the text.
n = 40 extracted values
Select a citation to see the quote, page and confidence behind a value.
20 of 40 extracted rows modelable
- 11 not canonicalised (no canonical slug)
- 9 contradicts other papers
| Parameter | Value | Unit | Confidence | Source | Notes | Modelable |
|---|---|---|---|---|---|---|
| Coulombic efficiency | 2.2 | % | 90% | extracted | "Coulombic efficiency, ηC (%): 2.20 ± 0.03" · T=25°C, pH(an)=7.2, substrate=lactate and sulfate | Modelable |
| Voltage | 0 | mV | 90% | extracted | "By conducting a control experiment using Na2S to mimic the S2- produced in the a…" · T=25°C, pH(an)=7.2, substrate=lactate and Na2S | Modelable |
| Power Density | 0.074 | W/m² | 90% | extracted | "Run 9 (DvH JWT700; 3 cm × 3 cm) exhibited a maximum power density of ~0.074 W/m2" · T=25°C, pH(an)=7.2, substrate=lactate and sulfate | Modelable |
| Charge Transfer Resistance | 3.7 | Ω | 90% | extracted | "The Rct values of anodes with DvH JWT700, DvH JW3422, and DvH JWT716 were found …" · T=25°C, pH(an)=7.2, substrate=lactate and sulfate | Modelable |
| Maximum voltage observed | 38 | mV | 90% | extracted | "Maximum voltage observed (mV): 38 ± 2" · T=25°C, pH(an)=7.2, substrate=lactate and sulfate | Excluded: not canonicalised (no canonical slug) |
| Power Density | 0.015 | W/m² | 90% | extracted | "Run 10 applying the DvH JW3422, which could not form pili, had a lower electrica…" · T=25°C, pH(an)=7.2, substrate=lactate and sulfate | Modelable |
| Maximum voltage observed | 87 | mV | 90% | extracted | "Maximum voltage observed (mV): 87 ± 3" · T=25°C, pH(an)=7.2, substrate=lactate and sulfate | Excluded: not canonicalised (no canonical slug) |
| Maximum voltage observed | 88 | mV | 90% | extracted | "Maximum voltage observed (mV): 88 ± 2" · T=25°C, pH(an)=7.2, substrate=lactate and sulfate | Excluded: not canonicalised (no canonical slug) |
| Coulombic efficiency | 1.33 | % | 90% | extracted | "Coulombic efficiency, ηC (%): 1.33 ± 0.03" · T=25°C, pH(an)=7.2, substrate=lactate and sulfate | Modelable |
| Maximum voltage observed | 42 | mV | 90% | extracted | "Maximum voltage observed (mV): 42 ± 4" · T=25°C, pH(an)=7.2, substrate=lactate and sulfate | Excluded: not canonicalised (no canonical slug) |
| Maximum voltage observed | 125 | mV | 90% | extracted | "Maximum voltage observed (mV): 125 ± 1" · T=25°C, pH(an)=7.2, substrate=lactate and sulfate | Excluded: not canonicalised (no canonical slug) |
| Coulombic efficiency | 2.65 | % | 90% | extracted | "Coulombic efficiency, ηC (%): 2.65 ± 0.01" · T=25°C, pH(an)=7.2, substrate=lactate and sulfate | Modelable |
| Coulombic efficiency | 1.83 | % | 90% | extracted | "Coulombic efficiency, ηC (%): 1.83 ± 0.03" · T=25°C, pH(an)=7.2, substrate=lactate and sulfate | Modelable |
| Coulombic efficiency | 5.65 | % | 90% | extracted | "Coulombic efficiency, ηC (%): 5.65 ± 0.05" · T=25°C, pH(an)=7.2, substrate=lactate and sulfate | Modelable |
| Maximum voltage observed | 95 | mV | 90% | extracted | "Maximum voltage observed (mV): 95 ± 4" · T=25°C, pH(an)=7.2, substrate=lactate and sulfate | Excluded: not canonicalised (no canonical slug) |
| Maximum voltage observed | 108 | mV | 90% | extracted | "Maximum voltage observed (mV): 108 ± 3" · T=25°C, pH(an)=7.2, substrate=lactate and sulfate | Excluded: not canonicalised (no canonical slug) |
| Coulombic efficiency | 0 | % | 90% | extracted | "Coulombic efficiency, ηC (%): 0.00 ± 0.0" · T=25°C, pH(an)=7.2, substrate=lactate and sulfate | Modelable |
| Maximum voltage observed | 3 | mV | 90% | extracted | "Maximum voltage observed (mV): 3 ± 0" · T=25°C, pH(an)=7.2, substrate=lactate and sulfate | Excluded: not canonicalised (no canonical slug) |
| Coulombic efficiency | 2.52 | % | 90% | extracted | "Coulombic efficiency, ηC (%): 2.52 ± 0.06" · T=25°C, pH(an)=7.2, substrate=lactate and sulfate | Modelable |
| Maximum voltage observed | 248 | mV | 90% | extracted | "Maximum voltage observed (mV): 248 ± 2" · T=25°C, pH(an)=7.2, substrate=lactate and sulfate | Excluded: not canonicalised (no canonical slug) |
| Coulombic efficiency | 0.36 | % | 90% | extracted | "Coulombic efficiency, ηC (%): 0.36 ± 0.02" · T=25°C, pH(an)=7.2, substrate=lactate and sulfate | Modelable |
| Power Density | 0.04 | W/m² | 90% | extracted | "Run 8 (~0.040 W/m2; DvH JWT700)" · T=25°C, pH(an)=7.2, substrate=lactate and sulfate | Modelable |
| Maximum voltage observed | 129 | mV | 90% | extracted | "Maximum voltage observed (mV): 129 ± 1" · T=25°C, pH(an)=7.2, substrate=lactate and sulfate | Excluded: not canonicalised (no canonical slug) |
| Coulombic efficiency | 0.79 | % | 90% | extracted | "Coulombic efficiency, ηC (%): 0.79 ± 0.01" · T=25°C, pH(an)=7.2, substrate=lactate and sulfate | Modelable |
| Maximum voltage observed | 7 | mV | 90% | extracted | "Maximum voltage observed (mV): 7 ± 0" · T=25°C, pH(an)=7.2, substrate=lactate and sulfate | Excluded: not canonicalised (no canonical slug) |
Methodology
What was the system and how was it run
Operating conditions
2 runs extracted| Run | T°C | pHan | pHcat | Substrate | [S]mg/L | HRTh | Mode | R_extΩ | V_appV | Inoculum |
|---|---|---|---|---|---|---|---|---|---|---|
| v2-6ada0eb1de570885 | 25 | 7.2 | — | lactate and Na2S | — | — | — | 1000 | — | — |
| v2-c70ae7780d7f5e39 | 25 | 7.2 | — | lactate and sulfate | — | — | — | 1000 | — | — |
Pipeline
Raw extractions, artifacts, quality signal
Extraction quality
honesty signalCalibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.
AI confidence
60%
Model self-reported confidence
Mean parameter confidence
90%
Average confidence across PaperParameter rows surfaced above
review against source PDF before citing · scores 0–1
Chart explorer
Move the inputs this paper used and see how the predicted outcome shifts.
Explore model
The reactor in 3D, with flow you can switch on and off.
AI insights
Contradictions, gaps and opportunities found by comparing this paper with the corpus.
Compare similar papers
The nearest papers by system, materials and organisms, with their outcomes side by side.
Source PDF
The paper as published.
Representative model, generic MFC
Tap to interactRepresentative model, generic MFC
Representative MFC — matched on the paper’s system type only, not its reactor or geometry.
In this record
Organisms, parameters and materials this paper reports. Each links to its page.
Organisms · 1
Keywords
- Electron transfer
- Extracellular
- Biophysics
- Microbial fuel cell
- Pilus
- Anode
Cite
Liyuan Hou, Rebecca Cortez, Michael E. Hagerman et al. (2024). Co-occurrence of direct and indirect extracellular electron transfer mechanisms during electroactive respiration in a dissimilatory sulfate reducing bacterium. Microbiology Spectrum. https://doi.org/10.1128/spectrum.01226-24
- PubMed
- 39636109
- Journal
- Microbiology Spectrum
Open in lab for full controls, parameter editing, and template overlays.
Open in lab