Paper · MFC
Simultaneous Electricity Generation and Heavy Metals Reduction from Distillery Effluent by Microbial Fuel Cell
Summary
What the paper reports, in its own words.
Abstract
Objectives: Raw distillery effluent put to use as substrate for electricity generation in MFC and effectiveness in treatment including heavy metals reduction using MFC are the focus of the study. Methods/Statistical Analysis: Dual chamber fuel cells were fabricated using Poly (methyl methacrylate) sheet as a single unit, graphite rods are used as electrodes. Microporous PVC separators are used for salt bridge to distinct the anode and cathode chambers so as comparing with the conventional ‘H’ type dual chamber reactor the distance between the electrodes are reduced. The fuel cells were operated in batch mode at room temperature. Findings: The Microbial Fuel Cell is a bio-electrochemical device draws electricity from the microorganism that utilizes the organic matter from the wastewater, different wastewater could be employed as a substrate. Distillery effluent consist of high chemical oxygen demand, it effectuated electricity generation for 73 days. The fuel cells produced a maximum voltage of 206 mV that derived a maximum current density 123.50 mA/m² and power density of 25194.8 mW/m² . Electricity generation and effluent treatment depends on the ability of the microorganism to convert the organic matter of the substrate. The COD removal 68.7% was obtained from the fuel cell it is effective than the conventional treatment techniques without pretreatment or dilution of the effluent. The MFC treatment also assisted the removal of Nitrate 76.6%, Phosphate 79.4%, Sulphate 70.8%. The overall performance of the fuel cell determined by the Columbic Efficiency rendered by the process was 47.12%. Elemental analysis of treated effluent exhibited considerable reduction of heavy metals present in the distillery effluent. Application/Improvements: This study shows that the treatment of raw distillery effluent is effective with MFC technique. It also signifies the potential of heavy metal reduction with MFC by simultaneous electricity generation. Keywords: COD, Distillery Effluent, Electricity, Heavy metals, MFC, Treatment
Extracted values
Every value pulled from the paper, with its source, so each number can be checked against the text.
Not yet extracted
This paper is queued for the MESSAI extraction pipeline. Experiment conditions, performance metrics, and structured parameters will appear here once it has been processed — check back, or open the original PDF above to read it now.
Chart explorer
Move the inputs this paper used and see how the predicted outcome shifts.
Explore model
The reactor in 3D, with flow you can switch on and off.
AI insights
Contradictions, gaps and opportunities found by comparing this paper with the corpus.
Compare similar papers
The nearest papers by system, materials and organisms, with their outcomes side by side.
Representative model, generic MFC
Tap to interactRepresentative model, generic MFC
Representative MFC — matched on the paper’s system type only, not its reactor or geometry.
Keywords
- Microbial fuel cell
- Effluent
- Pulp and paper industry
- Anode
- Chemical oxygen demand
- Electricity generation
Cite
Hanish Mohammed Coppath Hamza, Prabha Duraisamy, Selvendiran Periyasamy et al. (2017). Simultaneous Electricity Generation and Heavy Metals Reduction from Distillery Effluent by Microbial Fuel Cell. Indian Journal of Science and Technology. https://doi.org/10.17485/ijst/2017/v10i13/111203
Open in lab for full controls, parameter editing, and template overlays.
Open in lab