Paper · MFC
Effect of poised cathodic potential on anodic ammonium nitrogen removal from domestic wastewater by air-cathode microbial fuel cells.
Summary
What the paper reports, in its own words.
Abstract
Performances of anodic ammonia oxidation have been investigated for various bioelectrochemical systems at a wide range of poised anodic potentials in the literature. The effect of poised cathodic potential on ammonium nitrogen (NH4+-N) and total nitrogen (TN, sum of NH4+-N, NO2--N, and NO3--N) removal from domestic wastewater by single chamber air-cathode microbial fuel cells (MFCs) was investigated. Poising the air-cathode potential at + 0.7 V vs. SHE significantly increased current generation (from 11 ± 1 mA to 22.8 ± 5 mA) and oxygen permeation into the MFC through the air-cathode (from 75.4 ± 1.2 g-O2/m3/d to 151 ± 3.7 g-O2/m3/d), which consequently resulted in a high NH4+-N removal rate of 150 ± 13 g-NH4+-N/m3/d and TN removal rate of 63 ± 16 g-TN/m3/d. These high NH4+-N and TN removal rates could be attributed to the enhancement of dual respiratory pathways: the electrode-assisted anodic and aerobic NH4+ oxidation.
AI summary
100% confidenceMFC research in electrode, bacteria. Performances of anodic ammonia oxidation have been investigated for various bioelectrochemical syste...
Generated by MESSAI extraction pipeline · review against source PDF
Extracted values
Every value pulled from the paper, with its source, so each number can be checked against the text.
n = 6 extracted values
Select a citation to see the quote, page and confidence behind a value.
0 of 5 extracted rows modelable
- 2 not canonicalised (no canonical slug)
- 3 no SI value
| Parameter | Value | Unit | Confidence | Source | Modelable |
|---|---|---|---|---|---|
| Substrate | wastewater | — | 80% | llm | |
| Membrane material | CEM | — | 80% | extracted | Excluded: no SI value |
| Chambers | 1 | — | 80% | extracted | Excluded: not canonicalised (no canonical slug) |
| Reactor type | single-chamber | — | 80% | extracted | Excluded: not canonicalised (no canonical slug) |
| Cathode material×2 | air-cathode | — | 60% | extracted | Excluded: no SI value |
Methodology
What was the system and how was it run
Methodology
Methodology
The study investigated the effect of poised cathodic potential on anodic ammonium nitrogen removal from domestic wastewater by air-cathode microbial fuel cells through varying the cathode potential and measuring the resulting current generation, oxygen permeation, and nitrogen removal rates.
Operational parameters
| Field | Value |
|---|---|
| substrate | ["wastewater"] |
Pipeline
Raw extractions, artifacts, quality signal
Extraction quality
honesty signalCalibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.
Parameter completeness
25%
Fraction of expected parameters extracted
Data completeness
50%
Overall extraction coverage across fields
AI confidence
100%
Model self-reported confidence
Mean parameter confidence
72%
Average confidence across PaperParameter rows surfaced above
review against source PDF before citing · scores 0–1
Chart explorer
Move the inputs this paper used and see how the predicted outcome shifts.
Explore model
The reactor in 3D, with flow you can switch on and off.
AI insights
Contradictions, gaps and opportunities found by comparing this paper with the corpus.
Compare similar papers
The nearest papers by system, materials and organisms, with their outcomes side by side.
Representative model, generic MFC
Tap to interactRepresentative model, generic MFC
Representative MFC — matched on the paper’s system type only, not its reactor or geometry.
Keywords
- Microbial fuel cell
- Cathodic protection
- Anode
- Wastewater
- Cathode
- Ammonium
Cite
N'dah Joel Koffi, S. Okabe (2022). Effect of poised cathodic potential on anodic ammonium nitrogen removal from domestic wastewater by air-cathode microbial fuel cells. SSRN Electronic Journal. https://doi.org/10.2139/ssrn.3983958
- Journal
- SSRN Electronic Journal
Open in lab for full controls, parameter editing, and template overlays.
Open in lab