Paper
Kinetics of Pulp and Paper Wastewater Treatment by High Sludge Retention Time Activated Sludge Process
Summary
What the paper reports, in its own words.
Abstract
Paper and pulp industrial processes lead to the discharge of wastewater that contains high pollutants concentrations into the environment, which subsequently contaminate freshwater. Thus, it necessitates a sustainable treatment approach. This study focused on the start-up of the bench-scale activated sludge system fed with pulp and paper wastewater to verify the influence of HRT, wastewater concentration, and sugarcane bagasse on COD and ammonia removal efficiencies during the treatment process. An activated sludge process was operated at a flow rate of 5 L/day, while the reactor kept running at 72 h, 48 h, and 24 h HRT, respectively. Wastewater concentrations were set at 1039, 3158, 5248 mgCOD//L and 13.74, 40.37, 67.04 mgNH4+-N/L corresponding to 10, 50 and 100% respectively. Findings revealed high removal efficiencies up to 98.11% and 92.67% for COD and ammonia, respectively. After treatment, effluent concentrations for both parameters have satisfactorily met the Standard "A" standard limits for industrial discharge at 48 hours HRT. Therefore, further testing is not required. The First order and Modified Stover-Kincannon models evaluated substrate removal rates. In the Modified Stover–Kincannon model, high correlation coefficients R2 of 0.9999 and 0.9998 were obtained for COD and ammonia, respectively. Unfortunately, the activated sludge process in the bioreactor could not be described by the first-order kinetic model. The modified Stover-Kincannon model proved to best suit the experimental data.
AI summary
100% confidenceMES research with industrial-applications focus on industrial. Paper and pulp industrial processes lead to the discharge of wastewater that contains high pollutants concentrations int...
Generated by MESSAI extraction pipeline · review against source PDF
Extracted values
Every value pulled from the paper, with its source, so each number can be checked against the text.
n = 3 extracted values
Select a citation to see the quote, page and confidence behind a value.
0 of 2 extracted rows modelable
- 2 no SI value
| Parameter | Value | Unit | Confidence | Source | Modelable |
|---|---|---|---|---|---|
| Substrate | wastewater | — | 80% | llm | |
| Inoculum source | activated sludge | — | 80% | extracted | Excluded: no SI value |
| Hydraulic retention time | 48 | h | 50% | extracted | Excluded: no SI value |
Methodology
What was the system and how was it run
Methodology
Methodology
The study used a bench-scale activated sludge system with varying HRT (72 h, 48 h, 24 h) and wastewater concentrations (1039, 3158, 5248 mgCOD/L and 13.74, 40.37, 67.04 mgNH4+-N/L) to investigate the effects on COD and ammonia removal efficiencies.
Biological parameters
| Field | Value |
|---|---|
| inoculum source | activated sludge |
Performance metrics
| Field | Value |
|---|---|
| citation count | 8 |
Operational parameters
| Field | Value |
|---|---|
| substrate | ["wastewater"] |
Pipeline
Raw extractions, artifacts, quality signal
Extraction quality
honesty signalCalibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.
Parameter completeness
50%
Fraction of expected parameters extracted
Data completeness
60%
Overall extraction coverage across fields
AI confidence
100%
Model self-reported confidence
Mean parameter confidence
70%
Average confidence across PaperParameter rows surfaced above
review against source PDF before citing · scores 0–1
Chart explorer
Move the inputs this paper used and see how the predicted outcome shifts.
Explore model
The reactor in 3D, with flow you can switch on and off.
AI insights
Contradictions, gaps and opportunities found by comparing this paper with the corpus.
Compare similar papers
The nearest papers by system, materials and organisms, with their outcomes side by side.
No 3D model is mapped to this paper yet. The values extracted from it are listed under Extracted values.
Keywords
- Effluent
- Wastewater
- Activated sludge
- Pulp and paper industry
- Hydraulic retention time
- Sewage treatment
Cite
A. Jagaba, S. Kutty, A. Noor et al. (2022). Kinetics of Pulp and Paper Wastewater Treatment by High Sludge Retention Time Activated Sludge Process. Journal of Hunan University Natural Sciences. https://doi.org/10.55463/issn.1674-2974.49.2.24