Paper · MES
Clostridium ljungdahlii as a biocatalyst in microbial electrosynthesis – Effect of culture conditions on product formation
Summary
What the paper reports, in its own words.
Abstract
Microbial electrosynthesis enables the production of value-added chemicals from CO2 and electrons provided by an electrode. Clostridium ljungdahlii is an electroactive acetogen that potentially could be used in microbial electrosynthesis systems. However, the optimal operational parameters for microbial electrosynthesis using C. ljungdahlii are not known. Here, we explored the effects of yeast extract, pH, and cathode potential. A low initial pH increased the rate of acetate production from CO2 and H2 in serum bottle cultures. When cultivated in bioelectrochemical systems, the optimal coulombic efficiency (i.e. close to 100 %) was observed at a cathode potential between −0.8 V and −1.0 V, while the highest productivity was reached at −1.0 V. Addition of yeast extract to the medium was needed to ensure reproducible results. Using cyclic voltammetry, we detected hydrogen-mediated extracellular electron transfer of C. ljungdahlii during growth on CO2 in a bioelectrochemical system. These results show that operational parameters should be chosen carefully to maximise the efficiency of microbial electrosynthesis.
Extracted values
Every value pulled from the paper, with its source, so each number can be checked against the text.
n = 26 extracted values
Select a citation to see the quote, page and confidence behind a value.
0 of 26 extracted rows modelable
- 10 not canonicalised (no canonical slug)
- 12 no SI value
- 2 outside physical bounds
- 2 contradicts other papers
| Parameter | Value | Unit | Confidence | Source | Notes | Modelable |
|---|---|---|---|---|---|---|
| Coulombic efficiency | 365Outside physical range, check source | % | 90% | extracted | "resulting in CEs of 2788 %, 365 %, 18 %, and 5 %" · T=37°C, pH(an)=5, substrate=CO2 | Excluded: outside physical bounds |
| Coulombic efficiency | 2,790Outside physical range, check source | % | 90% | extracted | "resulting in CEs of 2788 %, 365 %, 18 %, and 5 %" · T=37°C, pH(an)=5, substrate=CO2 | Excluded: outside physical bounds |
| Coulombic efficiency | 18 | % | 90% | extracted | "resulting in CEs of 2788 %, 365 %, 18 %, and 5 %" · T=37°C, pH(an)=5, substrate=CO2 | Excluded: contradicts other papers |
| Coulombic efficiency | 5 | % | 90% | extracted | "resulting in CEs of 2788 %, 365 %, 18 %, and 5 %" · T=37°C, pH(an)=5, substrate=CO2 | Excluded: contradicts other papers |
| Lactate | 0.31 | mM | 90% | extracted | "0.31 ± 0.12 mM lactate" · T=37°C, pH(an)=5.7, substrate=H2:CO2 80:20 | Excluded: not canonicalised (no canonical slug) |
| OD660 maximum | 1.19 | — | 90% | extracted | "maximal OD660 of 1.19 ± 0.05" · T=37°C, pH(an)=5.7, substrate=H2:CO2 80:20 | Excluded: not canonicalised (no canonical slug) |
| OD660 maximum | 0.58 | — | 90% | extracted | "maximal OD660 was ~0.58 ± 0.07" · T=37°C, pH(an)=5.7, substrate=H2:CO2 80:20 | Excluded: not canonicalised (no canonical slug) |
| Ethanol Production Rate | 3.17 | mM | 90% | extracted | "3.17 ± 1.51 mM ethanol" · T=37°C, pH(an)=5.7, substrate=H2:CO2 80:20 | Excluded: no SI value |
| Formate | 10.1 | mM | 90% | extracted | "10.07 ± 0.37 mM formate" · T=37°C, pH(an)=5.7, substrate=H2:CO2 80:20 | Excluded: not canonicalised (no canonical slug) |
| 2,3 butanediol | 2.18 | mM | 90% | extracted | "2.18 ± 0.35 mM 2,3-butanediol" · T=37°C, pH(an)=5.7, substrate=CO2 | Excluded: not canonicalised (no canonical slug) |
| Lactate | 0.27 | mM | 90% | extracted | "0.27 ± 0.05 mM lactate" · T=37°C, pH(an)=5.7, substrate=CO2 | Excluded: not canonicalised (no canonical slug) |
| Lactate | 0.66 | mM | 90% | extracted | "0.66 ± 0.0 mM lactate" · T=37°C, pH(an)=5, substrate=CO2 | Excluded: not canonicalised (no canonical slug) |
| Formate | 6.01 | mM | 90% | extracted | "6.01 ± 0.60 mM formate" · T=37°C, pH(an)=5, substrate=CO2 | Excluded: not canonicalised (no canonical slug) |
| Lactate | 0.77 | mM | 90% | extracted | "0.77 mM lactate" · T=37°C, pH(an)=5, substrate=CO2 | Excluded: not canonicalised (no canonical slug) |
| Formate | 7.54 | mM | 90% | extracted | "7.54 ± 0.49 mM formate" · T=37°C, pH(an)=5, substrate=CO2 | Excluded: not canonicalised (no canonical slug) |
| Ethanol Production Rate | 5.44 | mM | 90% | extracted | "5.44 ± 1.75 mM ethanol" · T=37°C, pH(an)=5, substrate=H2:CO2 80:20 | Excluded: no SI value |
| Ethanol Production Rate | 2.78 | mM | 90% | extracted | "2.78 ± 0.09 mM ethanol" · T=37°C, pH(an)=5, substrate=H2:CO2 80:20 | Excluded: no SI value |
| Acetic Acid Concentration | 106 | mM | 90% | extracted | "105.72 ± 14.61 mM acetate" · T=37°C, pH(an)=5.7, substrate=H2:CO2 80:20 | Excluded: no SI value |
| Acetic Acid Concentration | 55.1 | mM | 90% | extracted | "55.07 ± 4.28 mM acetate" · T=37°C, pH(an)=5.7, substrate=H2:CO2 80:20 | Excluded: no SI value |
| Acetic Acid Concentration | 1.41 | mM | 90% | extracted | "produced only 1.41 ± 0.17 mM acetate" · T=37°C, pH(an)=5.7, substrate=CO2 | Excluded: no SI value |
| Acetic Acid Concentration | 0.91 | mM | 90% | extracted | "0.91 ± 0.01 mM acetate" · T=37°C, pH(an)=5, substrate=CO2 | Excluded: no SI value |
| Acetic Acid Concentration | 0.65 | mM | 90% | extracted | "BES reactors at CPs of −0.6 V and −0.8 V yielded only 0.65 ± 0.01 mM" · T=37°C, pH(an)=5, substrate=CO2 | Excluded: no SI value |
| Acetic Acid Concentration | 5.56 | mM | 90% | extracted | "5.56 ± 0.80 mM acetate" · T=37°C, pH(an)=5, substrate=CO2 | Excluded: no SI value |
| Acetic Acid Concentration | 2.02 | mM | 90% | extracted | "2.02 ± 1.5 mM acetate" · T=37°C, pH(an)=5, substrate=CO2 | Excluded: no SI value |
| Acetic Acid Concentration | 177 | mM | 90% | extracted | "176.94 ± 5.09 mM acetate" · T=37°C, pH(an)=5, substrate=H2:CO2 80:20 | Excluded: no SI value |
Methodology
What was the system and how was it run
Operating conditions
4 runs extracted| Run | T°C | pHan | pHcat | Substrate | [S]mg/L | HRTh | Mode | R_extΩ | V_appV | Inoculum |
|---|---|---|---|---|---|---|---|---|---|---|
| v2-5dcb11041d03447d | 37 | 5.7 | — | CO2 | — | — | — | — | — | — |
| v2-6b6b6c387ac4ffd1 | 37 | 5 | — | CO2 | — | — | — | — | — | — |
| v2-aed265d514f73b41 | 37 | 5.7 | — | H2:CO2 80:20 | — | — | — | — | — | — |
| v2-cbed428e90eb2075 | 37 | 5 | — | H2:CO2 80:20 | — | — | — | — | — | — |
Pipeline
Raw extractions, artifacts, quality signal
Extraction quality
honesty signalCalibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.
AI confidence
60%
Model self-reported confidence
Mean parameter confidence
90%
Average confidence across PaperParameter rows surfaced above
review against source PDF before citing · scores 0–1
Chart explorer
Move the inputs this paper used and see how the predicted outcome shifts.
Explore model
The reactor in 3D, with flow you can switch on and off.
AI insights
Contradictions, gaps and opportunities found by comparing this paper with the corpus.
Compare similar papers
The nearest papers by system, materials and organisms, with their outcomes side by side.
Source PDF
The paper as published.
Representative model, generic microbial electrochemical system
Tap to interactRepresentative model, generic microbial electrochemical system
Representative microbial electrochemical system — matched on the paper’s system type only, not its reactor or geometry.
In this record
Organisms, parameters and materials this paper reports. Each links to its page.
Organisms · 1
Keywords
- Electrosynthesis
- Microbial fuel cell
- Biochemical engineering
Cite
Chaeho Im, Kaspar Valgepea, Oskar Modin et al. (2022). Clostridium ljungdahlii as a biocatalyst in microbial electrosynthesis – Effect of culture conditions on product formation. Bioresource Technology Reports. https://doi.org/10.1016/j.biteb.2022.101156
Open in lab for full controls, parameter editing, and template overlays.
Open in lab