Dual-Function Biophotovoltaic Cell with Titanium Dioxide-Modified Anode for Efficient Wastewater Treatment and Power Generation
Alicia A. Mier, Ruth Belinda Domínguez-Espíndola, Hugo Olvera‐Vargas, Dante Jaramillo-Vargas +2
AI summary
82% confidenceThis study demonstrates a dual-function biophotovoltaic (BPV) system integrating mixed microalgae-bacteria biofilms with TiO₂-nanotube-decorated graphite felt anodes for simultaneous wastewater treatment and power generation. The TiO₂-NT anode achieved 2.37 mW/m² power density with >90% COD removal and >80% nitrogen removal from real domestic-industrial wastewater. Synergistic interactions between photosynthetic microalgae and heterotrophic bacteria, combined with enhanced electrode surface properties, significantly outperformed bare graphite controls and heterotrophic-only systems.
Generated by MESSAI extraction pipeline · review against source PDF
Reported parameters
No values extracted from this paper yet.
No 3D model is mapped to this paper yet. Parameter ranges above still place reported values on the literature distribution.
What they did
- System
- MSC
What worked
No outcome metrics extracted yet.
Abstract
Abstract This study evaluated the potential of mixed microalgae-bacteria cultures as electroactive microorganisms to enhance electricity production while simultaneously treating wastewater in emerging biophotovoltaic (BPV) systems. Graphite felt decorated with TiO₂ nanotubes (TiO₂-NTs) was used as the anode, supporting the growth of a biofilm composed of mixed microalgae-bacterial cultures. Batch BPV reactors treated real domestic-industrial wastewater and were compared with BPV systems using bare graphite felt anodes, both with and without microalgae-bacteria cultures. All BPVs operated under a 12-h light/dark cycle, with continuous current monitoring and water quality assessments performed at the beginning and end of the experiments. The TiO₂-NT BPV exhibited the highest power output, reaching 2.37 mW/m 2 . BPVs with bare graphite felt anodes achieved power densities of 1.48 mW/m 2 and 0.41 mW/m 2 with and without microalgae, respectively. Systems inoculated with microalgae-bacteria cultures also showed lower ohmic losses, reaching open circuit voltages between 0.125 and 0.130 V, whereas systems without microalgae reached only 0.050 V and exhibited faster potential drops. In terms of wastewater treatment, TiO₂-NT BPVs achieved the highest removal efficiencies for chemical oxygen demand (COD) and nitrogen, exceeding 90% COD removal and over 80% removal of total ammoniacal nitrogen and nitrate. This study demonstrates that integrating mixed microalgae-bacteria cultures with TiO₂ nanostructured anodes in multifunctional BPV systems significantly enhances both wastewater treatment performance and power generation.
Keywords
Identifiers
- Journal
- BioEnergy Research
- Year
- 2025