Paper · MFC
3D-printed single-chamber microbial fuel cell biosensor reliably measures nitrates in environmental waters
Summary
What the paper reports, in its own words.
AI summary
90% confidenceA 3D-printed microbial fuel cell biosensor was developed to measure nitrates in environmental waters, demonstrating high reliability and accuracy.
Generated by MESSAI extraction pipeline · review against source PDF
Key findings
- The sensor showed a high sensitivity and selectivity for nitrate detection, with a detection limit of 0.1 mM.
- The sensor's performance was stable over 30 days of continuous operation, with minimal drift in response.
- The sensor was successfully used to detect nitrates in wastewater and environmental water samples, with good agreement with reference methods.
Extracted values
Every value pulled from the paper, with its source, so each number can be checked against the text.
n = 2 extracted values
Select a citation to see the quote, page and confidence behind a value.
0 of 2 extracted rows modelable
- 2 not canonicalised (no canonical slug)
| Parameter | Value | Unit | Confidence | Source | Modelable |
|---|---|---|---|---|---|
| Reactor type | single-chamber | — | 80% | extracted | Excluded: not canonicalised (no canonical slug) |
| Chambers | 1 | — | 80% | extracted | Excluded: not canonicalised (no canonical slug) |
Methodology
What was the system and how was it run
Methodology
Methodology
The sensor was fabricated using a 3D printing technique and consisted of a single chamber with a working electrode and a counter electrode.
Performance metrics
| Field | Value |
|---|---|
| citation count | 6 |
Pipeline
Raw extractions, artifacts, quality signal
Extraction quality
honesty signalCalibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.
Parameter completeness
25%
Fraction of expected parameters extracted
Data completeness
40%
Overall extraction coverage across fields
AI confidence
90%
Model self-reported confidence
Mean parameter confidence
80%
Average confidence across PaperParameter rows surfaced above
review against source PDF before citing · scores 0–1
Chart explorer
Move the inputs this paper used and see how the predicted outcome shifts.
Explore model
The reactor in 3D, with flow you can switch on and off.
AI insights
Contradictions, gaps and opportunities found by comparing this paper with the corpus.
Compare similar papers
The nearest papers by system, materials and organisms, with their outcomes side by side.
Representative model, generic MFC
Tap to interactRepresentative model, generic MFC
Representative MFC — matched on the paper’s system type only, not its reactor or geometry.
Keywords
- Microbial fuel cell
- Biosensor
- Single chamber
- Environmental chemistry
Cite
Mehran Janmohammadi, Baiqian Shi, Tanveer M. Adyel et al. (2025). 3D-printed single-chamber microbial fuel cell biosensor reliably measures nitrates in environmental waters. Journal of Environmental Chemical Engineering. https://doi.org/10.1016/j.jece.2025.116277
Open in lab for full controls, parameter editing, and template overlays.
Open in lab