Research

Paper · MFC

Influence of carbon-based cathodes on biofilm composition and electrochemical performance in soil microbial fuel cells

01

Summary

What the paper reports, in its own words.

3D Interactive Model

Abstract

Increasing energy demands and environmental pollution concerns press for sustainable and environmentally friendly technologies. Soil microbial fuel cell (SMFC) technology has great potential for carbon-neutral bioenergy generation and self-powered electrochemical bioremediation. In this study, an in-depth assessment on the effect of several carbon-based cathode materials on the electrochemical performance of SMFCs is provided for the first time. An innovative carbon nanofibers electrode doped with Fe (CNFFe) is used as cathode material in membrane-less SMFCs, and the performance of the resulting device is compared with SMFCs implementing either Pt-doped carbon cloth (PtC), carbon cloth, or graphite felt (GF) as the cathode. Electrochemical analyses are integrated with microbial analyses to assess the impact on both electrogenesis and microbial composition of the anodic and cathodic biofilm. The results show that CNFFe and PtC generate very stable performances, with a peak power density (with respect to the cathode geometric area) of 25.5 and 30.4 mW m -2 , respectively. The best electrochemical performance was obtained with GF, with a peak power density of 87.3 mW m -2 . Taxonomic profiling of the microbial communities revealed differences between anodic and cathodic communities. The anodes were predominantly enriched with Geobacter and Pseudomonas species, while cathodic communities were dominated by hydrogen-producing and hydrogenotrophic bacteria, indicating H 2 cycling as a possible electron transfer mechanism. The presence of nitrate-reducing bacteria, combined with the results of cyclic voltammograms, suggests microbial nitrate reduction occurred on GF cathodes. The results of this study can contribute to the development of effective SMFC design strategies for field implementation.

02

Extracted values

Every value pulled from the paper, with its source, so each number can be checked against the text.

n = 61 extracted values

Select a citation to see the quote, page and confidence behind a value.

30 of 61 extracted rows modelable

  • 10 not canonicalised (no canonical slug)
  • 8 no SI value
  • 11 not marked applicable to modeling
  • 2 contradicts other papers
ParameterValueUnitConfidenceSourceNotesModelable
Electrode Surface Area×27cm95%
extracted
"the cathode (7 × 7 × 0.4 cm) was encased between two sheets of titanium mesh" · condition_hint=SMFC design parameter, cathode length/widthExcluded: no SI value
Catalyst Loading×20.2mg cm⁻²95%
extracted
"carbon cloth doped with Pt (Pt loading: 0.2 mg cm−2)" · condition_hint=SMFC design parameter, electrode_material=Pt-doped carbon cloth (PtC)Excluded: no SI value
Total Organic Carbon14%95%
soil analysis
"The physicochemical properties of the soil were assessed by an external company …" · pH(an)=7.2, substrate=soil organic matterExcluded: no SI value
Volatile Solids39%95%
soil analysis
"The physicochemical properties of the soil were assessed by an external company …" · pH(an)=7.2, substrate=soil organic matterExcluded: no SI value
Soil Electrical Conductivity1,090mS cm⁻¹95%
soil analysis
"The physicochemical properties of the soil were assessed by an external company …" · pH(an)=7.2, substrate=soil organic matterExcluded: not canonicalised (no canonical slug)
Power Density25.5mW m⁻²95%
polarization curve
"The results show that CNFFe and PtC generate very stable performances, with a pe…" · pH(an)=7.2, substrate=soil organic matter, steady_stateModelable
Power Density30.4mW m⁻²95%
polarization curve
"The results show that CNFFe and PtC generate very stable performances, with a pe…" · pH(an)=7.2, substrate=soil organic matter, steady_stateModelable
Power Density4.29mW m⁻²95%
polarization curve
"The lowest power was generated by SMFC-CC (0.021 mW, with a power density 4.285 …" · pH(an)=7.2, substrate=soil organic matter, steady_stateModelable
Power Density87.3mW m⁻²95%
polarization curve
"In particular, SMFC-GF generated a peak power of 0.43 ± 0.009 mW, corresponding …" · pH(an)=7.2, substrate=soil organic matter, steady_stateModelable
Electrode Spacing×24cm95%
extracted
"The SMFCs consisted of an anode buried in the soil and a cathode exposed to air …" · condition_hint=SMFC design parameterModelable
Electrode Surface Area×27cm95%
extracted
"The anode (graphite felt, 7 × 7 × 0.4 cm)" · condition_hint=SMFC design parameter, anode length/width, electrode_material=graphite feltExcluded: no SI value
Ohmic Resistance409Ω90%
eis
"At the start of the experiment, RU values for all the electrodes (solid symbols …" · pH(an)=7.2, substrate=soil organic matter, startupModelable
Voltage0.241 ± 0.038 (SD)V90%
voltage monitoring
"The performances of SMFC-CNFFe and SMFC-PtC were very similar, with steady outpu…" · pH(an)=7.2, substrate=soil organic matter, steady_stateModelable
Anode Potential-0.355 ± 0.043 (SD)V90%
potentiometry
"after about 10 days of operation, the anode potential vs Ag/AgCl stabilises at 0…" · pH(an)=7.2, substrate=soil organic matter, steady_stateExcluded: not marked applicable to modeling
Cathode Potential-0.123 ± 0.02 (SD)V90%
potentiometry
"The cathode potentials (Fig. 2c) of CNFeFe and PtC were similar (0.121 ± 0.031 a…" · pH(an)=7.2, substrate=soil organic matter, steady_stateExcluded: not marked applicable to modeling
Voltage0.244 ± 0.033 (SD)V90%
voltage monitoring
"The performances of SMFC-CNFFe and SMFC-PtC were very similar, with steady outpu…" · pH(an)=7.2, substrate=soil organic matter, steady_stateModelable
Ohmic Resistance295Ω90%
eis
"At the start of the experiment, RU values for all the electrodes (solid symbols …" · pH(an)=7.2, substrate=soil organic matter, startupModelable
Cathode Potential-0.121 ± 0.031 (SD)V90%
potentiometry
"The cathode potentials (Fig. 2c) of CNFeFe and PtC were similar (0.121 ± 0.031 a…" · pH(an)=7.2, substrate=soil organic matter, steady_stateExcluded: not marked applicable to modeling
Cathode Potential-0.321 ± 0.014 (SD)V90%
potentiometry
"while the cathode potentials for carboncloth was 0.321 ± 0.014 V, suggesting a l…" · pH(an)=7.2, substrate=soil organic matter, steady_stateExcluded: not marked applicable to modeling
Ohmic Resistance87.3Ω90%
eis
"Values of different circuit elements are reported in Table 1. At the end of the …" · pH(an)=7.2, substrate=soil organic matter, steady_stateModelable
Anode Potential-0.365 ± 0.024 (SD)V90%
potentiometry
"after about 10 days of operation, the anode potential vs Ag/AgCl stabilises at 0…" · pH(an)=7.2, substrate=soil organic matter, steady_stateExcluded: not marked applicable to modeling
Ohmic Resistance112Ω90%
eis
"Values of different circuit elements are reported in Table 1." · pH(an)=7.2, substrate=soil organic matter, steady_stateModelable
Ohmic Resistance224Ω90%
eis
"Values of different circuit elements are reported in Table 1." · pH(an)=7.2, substrate=soil organic matter, steady_stateModelable
Anode Potential-0.408 ± 0.014 (SD)V90%
potentiometry
"after about 10 days of operation, the anode potential vs Ag/AgCl stabilises at 0…" · pH(an)=7.2, substrate=soil organic matter, steady_stateExcluded: not marked applicable to modeling
Ohmic Resistance92.2Ω90%
eis
"Values of different circuit elements are reported in Table 1." · pH(an)=7.2, substrate=soil organic matter, steady_stateModelable
Showing 25 of 55

Methodology

What was the system and how was it run

Operating conditions

3 runs extracted
RunT°CpHanpHcatSubstrate[S]mg/LHRThModeR_extΩV_appVInoculum
v2-34dea0dfaa220134—7.2—soil organic matter——————
v2-973022fb84f8c478—7.2—soil organic matter——startup500——
v2-fb8fb2199dc8ef7d—7.2—soil organic matter——steady_state500——

Pipeline

Raw extractions, artifacts, quality signal

Extraction quality

honesty signal

Calibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.

AI confidence

60%

Model self-reported confidence

Mean parameter confidence

87%

Average confidence across PaperParameter rows surfaced above

review against source PDF before citing · scores 0–1

03

Chart explorer

Move the inputs this paper used and see how the predicted outcome shifts.

04

Explore model

The reactor in 3D, with flow you can switch on and off.

05

AI insights

Contradictions, gaps and opportunities found by comparing this paper with the corpus.

06

Compare similar papers

The nearest papers by system, materials and organisms, with their outcomes side by side.

07

Source PDF

The paper as published.

loading 3D model…

Representative model, generic MFC

Representative MFC — matched on the paper’s system type only, not its reactor or geometry.

MFC
System
87.3milliwatts per square metre
Best result · Power density
best of 4
61
Extracted values
2023
Year

Keywords

  • Microbial fuel cell
  • Biofilm
  • Electrochemistry
  • Composition (language)
  • Cathode
  • Carbon fibers

Cite

Arpita Nandy, Daniel Farkas, Belén Pepió‐Tárrega et al. (2023). Influence of carbon-based cathodes on biofilm composition and electrochemical performance in soil microbial fuel cells. Environmental Science and Ecotechnology. https://doi.org/10.1016/j.ese.2023.100276

PubMed
37206316

Open in lab for full controls, parameter editing, and template overlays.

Open in lab