Microbial Electrochemical Energy Storage and Recovery in a Combined Electrotrophic and Electrogenic Biofilm
Matthew D. Yates, Li Ma, Joshua Sack, Joel P. Golden +3
Reported parameters
No values extracted from this paper yet.
No 3D model is mapped to this paper yet. Parameter ranges above still place reported values on the literature distribution.
Abstract
Here we report enrichment from a marine-derived inoculum of a nonphotosynthetic electroactive biofilm that is capable of both consuming electricity (electrotrophy) and producing electricity (electrogenesis) from a single electrode. With the alternation of the electrode potential between −0.4 and 0.0 VSHE every 10 min, alternating anodic and cathodic currents increased in lock step (maximum current density of ±1.4 ± 0.4 A/m² in both modes, Coulombic efficiency of ∼98% per charge–discharge cycle), which is consistent with alternating between generation and consumption of energy storage compounds by the biofilm. Cyclic voltammetry exhibited a single sigmoid-shaped feature spanning anodic and cathodic limiting currents centered at −0.15 VSHE, a phenomenon not observed to date for an electroactive biofilm, and square wave voltammetry exhibited reversible peaks at −0.15 and −0.05 VSHE, suggesting the same redox cofactor(s) facilitates electron transport at the biofilm–electrode interface in both modes. Hydrogen and carbon monoxide, known energy and/or carbon sources for cellular metabolism, but no volatile fatty acids, were detected in reactors. Cells and cell clusters were spread across the electrode surface, as seen by confocal microscopy. These results suggest that a single microbial electrochemical biofilm can alternate between storing energy and generating power, furthering the potential applicability of bioelectrochemical systems.
Keywords
Identifiers
- Journal
- Environmental Science & Technology Letters
- Year
- 2017