Microbial electrochemical systemRepresentative model
Click to animate flow
loading 3D model…

Representative microbial electrochemical system — matched on the paper’s system type only, not its reactor or geometry.

Extraction

Reported parameters

No values extracted from this paper yet.

Open in lab for full controls, parameter editing, and template overlays.

Open in lab →

What they did

System
MES

What worked

No outcome metrics extracted yet.

Abstract

Abstract Microbial electrosynthesis (MES) is a promising technology for CO 2 fixation and electrical energy storage. Currently, the low current density of MES limits its practical application. The H 2 -mediated and non-biofilm-driven MES could work under higher current density, but it is difficult to achieve high coulombic efficiency (CE) due to low H 2 solubility and poor mass transfer. Here, we proposed to enhance the hydrogen mass transfer by adding silica nanoparticles to the reactor. At pH 7, 35 ℃ and 39 A·m − 2 current density, with the addition of 0.3wt% silica nanoparticles, the volumetric mass transfer coefficient ( k La ) of H 2 in the reactor increased by 32.4% (from 0.37 h − 1 to 0.49 h − 1 ), thereby increasing the acetate production rate and CE of the reactor by 69.8% and 69.2%, respectively. The titer of acetate in the reactor with silica nanoparticles (18.5 g·L − 1 ) was 56.9% higher than that of the reactor without silica nanoparticles (11.8 g·L − 1 ). Moreover, the average acetate production rate of the reactor with silica nanoparticles was up to 2.14 g·L − 1 ·d − 1 in the stable increment phase, which was much higher than the other reported reactors. These results demonstrated that the addition of silica nanoparticles is an effective approach to enhancing the performance of H 2 -mediated MES reactors. Graphical Abstract

Keywords

Industrial and production engineeringHydrogen productionElectrosynthesisNanoparticleChemical engineeringHydrogen

Identifiers

Journal
Bioresources and Bioprocessing
Year
2023