Study on dielectric barrier discharge in nanostructured electrode materials

Abstract

Abstract In order to conduct dielectric barrier discharge experiments under normal pressure and low voltage (less than 15000V), an ac high-voltage differential power supply based on series-parallel LCC-type(Inductor L and capacitor Cr, Cp are connected in series and parallel structure) resonant converter is designed. The designed power supply prototype has the advantages of small size, light weight and easy operation. The power supply prototype has been tested on loads for many times. Its output repeatability is good and it can continuously output stable sinusoidal ac voltage. At the same time, the prototype also has a strong ability to resist electromagnetic interference. Moreover, the dielectric barrier discharge experiment is carried out using copper electrode with zinc oxide nanowires and copper electrode without zinc oxide nanowires. The experimental results show that the starting voltage of the test group with nanostructures growing on the surface is smaller, about 2500V lower than that of the latter under the same dielectric conditions and discharge spacing. In terms of the discharge phenomenon, the former has a better discharge process consistency, the non-nanostructured electrode discharge is unstable, and the difference in the discharge process is obvious.

Keywords

Identifiers

DOI

10.1088/1742-6596/1605/1/012147

Journal

Journal of Physics: Conference Series

Year

2020