Scalability of self-stratifying microbial fuel cell: Towards height miniaturisation
Xavier Alexis Walter, Carlo Santoro, John Greenman, Ioannis Ieropoulos
Representative MFC — matched on the paper’s system type only, not its reactor or geometry.
Reported parameters
No values extracted from this paper yet.
Open in lab for full controls, parameter editing, and template overlays.
Open in lab →What they did
- System
- MFC
What worked
No outcome metrics extracted yet.
Abstract
The scalability of bioelectrochemical systems is a key parameter for their practical implementation in the real-world. Up until now, only urine-fed self-stratifying microbial fuel cells (SSM-MFCs) have been shown to be scalable in width and length with limited power density losses. For practical reasons, the present work focuses on the scalability of SSM-MFCs in the one dimension that has not yet been investigated, namely height. Three different height conditions were considered (1 cm, 2 cm and 3 cm tall electrodes). The normalised power density of the 2 cm and 3 cm conditions were similar either during the durability test under a hydraulic retention time of ≈39 h (i.e. 15.74 ± 0.99 μW.cm -3 ) and during the polarisation experiments (i.e. 27.79 ± 0.92 μW.cm -3 ). Conversely, the 1 cm condition had lower power densities of 11.23 ± 0.07 μW.cm -3 and 17.73 ± 3.94 μW.cm -3 both during the durability test and the polarisation experiment, respectively. These results confirm that SSM-MFCs can be scaled in all 3 dimensions with minimal power density losses, with a minimum height threshold for the electrode comprised between 1 cm and 2 cm.
Keywords
Identifiers
- PubMed
- 30735920
- Journal
- Bioelectrochemistry
- Year
- 2019