Generic MFCRepresentative model
Click to animate flow
loading 3D model…

Representative MFC — matched on the paper’s system type only, not its reactor or geometry.

Extraction

Reported parameters

No values extracted from this paper yet.

Open in lab for full controls, parameter editing, and template overlays.

Open in lab →

What they did

System
MFC

What worked

No outcome metrics extracted yet.

Abstract

Abstract In this study, thin-film composite with embedded polyester screen, cellulose triacetate with a cast nonwoven and cellulose triacetate with embedded polyester screen (CTA-ES) was examined as the intermediate membranes in osmotic microbial fuel cells (OsMFCs). The reactors were fed with actual landfill leachate and the performance was studied in two operation modes: active layer facing draw solution and active layer facing feed solution (AL-FS). The OsMFC with CTA-ES exhibited the best energy generation (maximum power density: 0.44 W m − 2 ) and pollutant removal efficiency (ammonia nitrogen: 70%, total nitrogen: 74%) in the AL-FS mode, which could be ascribed to the lowest internal resistance (237 Ω) and highest microbial richness. Pseudomonas was the highest proportion of microbial in OsMFCs. The result of this study has demonstrated the potential of OsMFCs for landfill leachate treatment.

Keywords

Cellulose triacetateLeachateMicrobial fuel cellMembranePolyesterPollutant

Identifiers

Journal
Sustainable Environment Research
Year
2021