Microbial desalination cellRepresentative model
Click to animate flow
loading 3D model…

Representative microbial desalination cell — matched on the paper’s system type only, not its reactor or geometry.

Extraction

Reported parameters

No values extracted from this paper yet.

Open in lab for full controls, parameter editing, and template overlays.

Open in lab →

What they did

System
MDC

What worked

No outcome metrics extracted yet.

Abstract

In this study, the dilution of anolyte and catholyte as a pH control measure in a newly developed microbial desalination cell (MDC) was explored. Also, the effects of dilution on the newly developed MDC’s electricity generation, desalination and wastewater treatment efficiencies were assessed against a three-chamber MDC which used potassium phosphate buffer for pH control. On the average, the newly developed MDC exhibited a lower buffer capacity (pH change of 1.73 ± 0.06) as compared to the relatively higher buffer capacity (pH change of 1.49 ± 0.07) of the three-chamber MDC. However, the newly developed MDC produced a higher desalination efficiency of 50.01% compared to the 46.66% produced by the three-chamber MDC and a higher power density of 0.62 ± 0.13 W/m³ than the 0.35 ± 0.70 W/m³ produced by the three-chamber MDC. It’s COD reduction efficiency (63.21%) was also higher than the 42.81% produced by the three-chamber MDC.

Keywords

DesalinationDilutionWastewaterElectrolyteEffluentChromatography

Identifiers

Journal
Journal of Fundamental and Applied Sciences
Year
2021