Textile dye removal using diatomite nanocomposites: a metagenomic study in photosynthetic microalgae-assisted microbial fuel cells
Anshuman Rai, Vandana Sirotiya, Ankesh Ahirwar, Gurpreet Singh +4
Representative MFC — matched on the paper’s system type only, not its reactor or geometry.
Reported parameters
No values extracted from this paper yet.
Open in lab for full controls, parameter editing, and template overlays.
Open in lab →What they did
- System
- MFC
What worked
No outcome metrics extracted yet.
Abstract
In this study, Coomassie brilliant blue (CBB), brilliant green (BG), and rhodamine (Rh) dyes were used to simulate dye-rich wastewater. Adsorption and degradation of these dyes (2 μM, 10 μM, and 30 μM) on diatomite (DE) were evaluated under light (L) and dark (D) conditions. The adsorption of dye-DE composites followed pseudo-second-order kinetics at all concentrations and conditions had R 2 > 0.99, thus showing a good fit. The calculated equilibrium adsorption amount q e,(cal) was coherent with the value of experimental q e,(exp) . The poorest adsorption and photocatalysis occurred at 30 μM, prompting the functionalization of dyes with TiO 2 and Fe 3 O 4 nanoparticles (NP(s)). The highest dye degradation efficiencies (DG eff ) for 30 μM dyes were 86.79% (CBB-DE-Fe 3 O 4 , 72 h), 96.10% (BG-DE-TiO 2 , 52 h), and 81.74% (Rh-DE-TiO 2 , 48 h), with Rh-DE-TiO 2 showing the fastest degradation. Functionalized DE-dye (30 μM) nanocomposites were further tested in a photosynthetic microalgae-assisted microbial fuel cell with dye-simulated wastewater at the anode (PMA-MFC-1 with CBB-DE-Fe 3 O 4 , PMA-MFC-2 with BG-DE-TiO 2 and PMA-MFC-3 with Rh-DE-TiO 2 ) and Asterarcys sp. GA4 microalgae at the cathode. In dark anode chambers, PMA-MFC-3 achieved the highest DG eff value of Rh dye as 88.23% and a polarization density of 30.06 mW m -2 , outperforming PMA-MFC-2 with BG dye and PMA-MFC-1 with CBB dye. The molecular identifier analysis of microbes in wastewater at the anode showed the dominance of Sphingobacteria and Proteobacteria in PMA-MFC-3 (Rh-DE-TiO 2 ) and COD removal of 61.36%, highlighting its potential for efficient dye degradation and bioelectricity generation. Furthermore, PMA-MFC-3 simultaneously demonstrated a superior microalgal lipid yield of 3.42 μg g -1 and an algal growth of 8.19 μg g -1 at the cathode.
Keywords
Identifiers
- PubMed
- 40103993
- Journal
- RSC Advances
- Year
- 2025