Carbon-Encapsulated Iron Nanoparticles as a Magnetic Modifier of Bioanode and Biocathode in a Biofuel Cell and Biobattery

Abstract

This work demonstrates the application of magnetic carbon-encapsulated iron nanoparticles (CEINs) for the construction of bioelectrodes in a biobattery and a biofuel cell. It has been shown that carbon-encapsulated iron nanoparticles are a suitable material for the immobilization of laccase (Lc) and 1,4-naphthoquinone (NQ) and fructose dehydrogenase (FDH). The system is stable; no leaching of the enzyme and mediator from the surface of the modified electrode was observed. The onset of the catalytic reduction of oxygen to water was at 0.55 V, and catalytic fructose oxidation started at −0.15 V. A biobattery was developed in which a zinc plate served as the anode, and the cathode was a glassy carbon electrode modified with carbon-encapsulated iron nanoparticles, laccase in the Nafion (Nf) layer. The maximum power of the cell was ca. 7 mW/cm² at 0.71 V and under external resistance of 1 kΩ. The open-circuit voltage (OCV) for this system was 1.51 V. In the biofuel cell, magnetic nanoparticles were used both on the bioanode and biocathode to immobilize the enzymes. The glassy carbon bioanode was coated with carbon-encapsulated iron nanoparticles, 1,4-naphthoquinone, fructose dehydrogenase, and Nafion. The cathode was modified with carbon-encapsulated magnetic nanoparticles and laccase in the Nafion layer. The biofuel cell parameters were as follows: maximum power of 78 µW/cm² at the voltage of 0.33 V and under 20 kΩ resistance, and the open-circuit voltage was 0.49 V. These enzymes worked effectively in the biofuel cell, and laccase also effectively worked in the biobattery.

Keywords

Identifiers

DOI

10.3390/catal11060705

Journal

Catalysts

Year

2021