Polyaniline‐modified anodes for brewery waste treatment in microbial fuel cells: insights into inoculum selection, cell configuration, and lactic acid valorization

Abstract

This study focuses on the treatment of brewery waste slurries (BWS) with high chemical oxygen demand (COD) using a single‐chamber microbial fuel cell (MFC) inoculated with heat‐treated anaerobic seed sludge. A co‐substrate of 5 g L⁻¹ glycerol was added, and carbon felt (CF) was employed as the anode material, enhanced through in situ polymerization of aniline (PANI/CF). Additionally, the adsorption of ruthenium dioxide nanoparticles onto the modified CF was assessed (PANI‐RO/CF).Tests conducted at room temperature (19 °C to 22 °C) achieved an average COD reduction of 36%. The PANI‐RO/CF electrode accumulated 24% more charge, resulting in the highest coulombic efficiency of 75.1%, significantly exceeding similar studies. However, the PANI‐modified anode generated more energy, exceeding that of the bare CF by more than double, reaching 57.1 mW m⁻². An optimized working volume was identified in relation to other reported works. Microbial population analysis revealed an interaction between Staphylococcus epidermidis and a rarely reported psychrophilic Bacillus species. After 30 h, lactic acid emerged as the main by‐product, with a concentration of 7.5 ± 0.6 g L⁻¹.These findings highlight an optimization approach based on cell configuration and inoculum selection, as well as a significant valorization pathway that is frequently overlooked in the existing literature on brewery wastewater treatment using MFCs, particularly regarding the attractiveness of lactic acid production. © 2024 The Author(s). Journal of Chemical Technology and Biotechnology published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry (SCI).

Keywords

Identifiers

DOI

10.1002/jctb.7805

Journal

Journal of Chemical Technology & Biotechnology

Year

2024