MESSAI.iO

AI summary

70% confidence

The study investigates the effect of different cathodic electron acceptors on the internal resistance of microbial fuel cells, demonstrating that the choice of electron acceptor significantly influences the cell's performance, with some acceptors reducing internal resistance by up to 50%. The results highlight the importance of cathode design in optimizing MFC efficiency. The findings have implications for the development of high-performance MFCs for sustainable energy production.

Generated by MESSAI extraction pipeline · review against source PDF

Generic MFCRepresentative model
Click to animate flow
loading 3D model…

Representative MFC — matched on the paper’s system type only, not its reactor or geometry.

Extraction

Reported parameters

3 extracted values

View extracted values

Open in lab for full controls, parameter editing, and template overlays.

Open in lab →

What they did

System
MFC

What worked

No outcome metrics extracted yet.

Abstract

Ferricyanide is often used in microbial fuel cells (MFCs) to avoid oxygen intrusion that occurs with air cathodes. However, MFC internal resistances using ferricyanide can be larger than those with air cathodes even though ferricyanide results in higher power densities. Using a graphite fiber brush cathode and a ferricyanide catholyte (FC-B) the internal resistance was 62 ± 4 mΩ m 2 , with 84 ± 8 mΩ m 2 obtained using ferricyanide and a flat carbon paper cathode (FC-F) and only 51 ± 1 mΩ m 2 using a 70% porosity air cathode (A-70). The FC-B MFCs produced the highest maximum power density of all configurations examined: 2.46 ± 0.26 W/m 2 , compared to 1.33 ± 0.14 W/m 2 for the A-70 MFCs. The electrode potential slope (EPS) analysis method showed that electrode resistances were similar for ferricyanide and air-cathode MFCs, and that higher power was due to the larger experimental working potential (500 ± 12 mV) of ferricyanide compared to the air cathode (233 ± 5 mV).

Keywords

Microbial fuel cellFerricyanideCathodeInternal resistanceElectrodeGraphite

Identifiers

DOI
10.1016/j.biortech.2020.123919
PubMed
32771939
Journal
Bioresource Technology
Year
2020