MESSAI.iO

AI summary

70% confidence

Carbon electrodes were modified using plasma irradiation to improve hydrophobic and hydrophilic properties for efficient water flow and catalysis reactions in PEMFC.

Generated by MESSAI extraction pipeline · review against source PDF

Generic MFCRepresentative model
Click to animate flow
loading 3D model…

Representative MFC — matched on the paper’s system type only, not its reactor or geometry.

Extraction

Reported parameters

6 extracted values

View extracted values

Open in lab for full controls, parameter editing, and template overlays.

Open in lab →

What they did

System
MFC

What worked

No outcome metrics extracted yet.

Abstract

Carbon electrodes are one of the key materials in polymer electrolyte fuel cells (PEFC), or proton exchange membrane fuel cells (PEMFC). The electrodes should allow water or water vapor, which is produced by the redox reactions, to flow out of the cells efficiently. In the meantime, the catalysis reactions are not interfered. In this study, the carbon electrodes for PEMFC have been modified in terms of the hydrophobic and hydrophilic properties by plasma irradiation. The process utilized inductively coupled plasma (ICP) driven by applying radio frequency (rf) power on an induction coil. A pure Ar, O2, and Ar∕O2 gas mixture were used as the plasma gas. Only one side of the sample has been treated. The material properties of the plasma treated and untreated carbon electrodes were investigated by Raman spectroscopy, Fourier transformed infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). FTIR results show the plasma treatments effectively modified the functional groups on the carbon surface, and therefore the hydrophilic and hydrophobic properties of the surface. SEM and Raman spectra data suggested that the ion bombardment during plasma treatments alters the surface morphology and carbon bonding structures of the samples, which also result in a hydrophilic surface. The treated carbon electrodes were used as cathodes and have been packed with commercial carbon anodes and catalyst coated membrane to form 5cm×5cm fuel cells. The current-voltage polarization curves of these fuel cells were measured and compared. The test results show the feasibility of improving the cell performance by plasma treated electrodes. The feasibility of altering the hydrophobic and hydrophilic properties by plasma treatment has been demonstrated. The capillary effect due to the unbalanced hydrophilicity between the treated and untreated electrode surfaces may be responsible for the improved cell performance.

Key findings

  • Plasma treatments effectively modified functional groups on the carbon surface.
  • Ion bombardment during plasma treatments altered the surface structure.
  • Raman spectroscopy and FTIR results confirmed the changes in material properties.

Keywords

Proton exchange membrane fuel cellElectrolyteRaman spectroscopyChemical engineeringElectrodeCathode

Identifiers

DOI
10.1115/1.2211638
Journal
Journal of Fuel Cell Science and Technology
Year
2006