Electrodeposited polyaniline-carbon felt anode promotes electroactive biofilm for the improved energy recovery in microbial fuel cells using phenol containing wastewater
Subhendu Bhandari, Soumya Pandit, Chetan Pandit, Nishant Ranjan
AI summary
70% confidenceResearchers developed a polyaniline-carbon felt composite anode for microbial fuel cells, which promoted electroactive biofilm and improved energy recovery in phenol-containing wastewater.
Generated by MESSAI extraction pipeline · review against source PDF
Representative MFC — matched on the paper’s system type only, not its reactor or geometry.
Open in lab for full controls, parameter editing, and template overlays.
Open in lab →What they did
- System
- MFC
- Substrate
- real wastewater
What worked
No outcome metrics extracted yet.
Abstract
Abstract In the present study, Polyaniline (PANI)/ Carbon Felt (CF) composite electrodes were developed to be used as an anode in a Microbial Fuel Cell (MFC) for the enrichment of specific electroactive organisms on the anode. Comparative analysis of two approaches of Phenol degradation namely adsorption & biodegradation and for simultaneous generation of bio-electricity. Sulfuric acid-doped PANI was electrochemically synthesized in aqueous medium and deposited in-situ on the carbon felt anode followed by its characterization using SEM, XRD, and CV. To use these in MFC, different concentrations of PANI ranging from 0.25 mg/cm 2 to 1.25 mg/cm 2 , was deposited onto CF via potentiostatic electrodeposition technique and compared. The morphological analysis using FESEM of the anode revealed homogenous deposition of nanostructured PANI onto the surface of CF. Further characterization of PANI/CF composite shows that PANI has improved the surface area of the anode, thereby, increasing the conductivity of the anode and promoting biofilm attachment to the anode. The PANI/ CF composite anode with loading rate of 1.0 mg/cm 2 showed the best results with maximum power density of 584.2 mW m -2 and lowest charge transfer resistance of 49.6 Ω. The reduction of COD and total phenol of wastewater were 73% and 88% respectively. The obtained results from this study show that the power production and efficiency of the MFCs can be improved greatly by using Sulphate containing PANI/ CF composite as an anode material. The CLSM results indicated that PANI facilitates in promoting EAB biofilm which in turn helps in achieving enhanced power output.
Key findings
- Polyaniline (PANI) deposition improved the surface area and conductivity of the anode.
- The PANI/CF composite anode with 1.0 mg/cm² loading rate showed enhanced biofilm attachment and energy recovery.
- Comparative analysis of phenol degradation showed improved biodegradation and bio-electricity generation using the PANI/CF composite anode.
Keywords
Identifiers
- Journal
- Research Square
- Year
- 2024