Distribution Study of Species and Current Density During Oxygen Starvation

Abstract

In a fuel cell system the stack is strongly coupled with the main system components, among which the compressor is one of the most important. Malfunction of this auxiliary device (delay during peak power, low stoichiometry operation, emergency stop, etc.) is directly responsible for bad oxygen distribution in the cathode (substoichiometry reactants feeding). This phenomenon is usually called oxygen starvation. In this study we want to identify the consequences of oxygen starvation on the performance and durability of polymer electrolyte membrane fuel cell stacks, and more particularly, on the current distribution along the cell. The oxygen concentration decreases along the channel and induces a change in the local electrochemical response; it means that the local current density on the cell is redistributed on the surface. This bad distribution of reactive gas (in a transient time or long time) decreases the performance but may also have an effect on cathode degradation such as carbon corrosion and platinum dissolution/oxidation. The current distribution along the cell is studied by two approaches (modeling and experiments). The 3D model using serpentine bipolar plate meshing is adapted to dynamically compute for the catalyst layer local conditions (local current, temperature, gases partial pressure, and water activity). It is able to reproduce the conditions of low or high oxygen concentration in the cathode side. The experiments are performed with a bi-cell stack developed by CEA with specific design for the magnetic sensors (the local current is computed by measuring the local induced magnetic field and using the Maxwell equations).

Key findings

• ▸Oxygen starvation leads to a decrease in local current density and a redistribution of reactive gas along the cell.
• ▸The phenomenon causes a decrease in performance and may lead to cathode degradation, including carbon corrosion and platinum dissolution/oxidation.
• ▸A 3D model and experimental approaches are used to study the current distribution along the cell.

Keywords

Identifiers

DOI

10.1115/1.4001018

Journal

Journal of Fuel Cell Science and Technology

Year

2010