MESSAI.iO

AI summary

70% confidence

This paper investigates the performance of continuous-flow microbial fuel cells (MFCs) and membrane electrode assemblies (MEAs) with electrodeposited Mn oxide catalyst, showing improved catalytic activity and power density compared to Pt/C electrodes.

Generated by MESSAI extraction pipeline · review against source PDF

Literature priors

Generic MFCRepresentative model
Click to animate flow
loading 3D model…

Representative MFC — matched on the paper’s system type only, not its reactor or geometry.

Distribution

Reported parameters

The author’s reported value (▼) sits on top of the literature distribution from MESS-Parameters. Values outside the band are flagged as outliers.

Coulombic efficiency5%

4 extracted values

View extracted values

Open in lab for full controls, parameter editing, and template overlays.

Open in lab →

What they did

System
MFC

What worked

No outcome metrics extracted yet.

Abstract

Microbial fuel cells (MFCs) are considered promising energy sources whereby chemical energy is converted into electricity via bioelectrochemical reactions utilizing microorganisms. Several factors affect MFC performance, including cathodic reduction of oxygen, electrode materials, cell internal and external resistances, and cell design. This work describes the effect of the catalyst coating in the air-cathode membrane electrode assembly (MEA) for a microbial fuel cell (MFC) prepared via electrodeposition of manganese oxide. The characterization of the synthesized air-cathode MFC, operating in a continuous mode, was made via electrochemical impedance spectroscopy (EIS) analyses for the determination of the intrinsic properties of the electrode that are crucial for scalability purposes. EIS analysis of the MFCs and of the MEA reveals that the anode and cathode contribute to polarization resistance by about 85% and 15%, respectively, confirming the high catalytic activity of the Mn-based air cathode. The maximum power density of the Mn-based cathode is about 20% higher than that recorded using a Pt/C electrode.

Key findings

  • The anode and cathode contribute to polarization resistance by about 85% and 15%, respectively.
  • The maximum power density of the Mn-based cathode is about 20% higher than that recorded using a Pt/C electrode.
  • Electrochemical impedance spectroscopy (EIS) analysis reveals the intrinsic properties of the electrode crucial for scalability purposes.

Keywords

ElectrodeMembraneCatalysisOxideMicrobial fuel cellChemical engineering

Identifiers

DOI
10.3390/en17040943
Journal
Energies
Year
2024