Direct Bioelectricity Generation from Sago Hampas by Clostridium beijerinckii SR1 Using Microbial Fuel Cell
Mohd Azwan Jenol, Mohamad Faizal Ibrahim, Ezyana Kamal Bahrin, Seung Wook Kim +1
AI summary
80% confidenceMicrobial fuel cells using Clostridium beijerinckii SR1 can efficiently generate bioelectricity from sago hampas, a starchy biomass, with a maximum power density of 73.8 mW/cm².
Generated by MESSAI extraction pipeline · review against source PDF
Representative MFC — matched on the paper’s system type only, not its reactor or geometry.
Open in lab for full controls, parameter editing, and template overlays.
Open in lab →What they did
- System
- MFC
What worked
No outcome metrics extracted yet.
Abstract
Microbial fuel cells offer a technology for simultaneous biomass degradation and biological electricity generation. Microbial fuel cells have the ability to utilize a wide range of biomass including carbohydrates, such as starch. Sago hampas is a starchy biomass that has 58% starch content. With this significant amount of starch content in the sago hampas, it has a high potential to be utilized as a carbon source for the bioelectricity generation using microbial fuel cells by Clostridium beijerinckii SR1. The maximum power density obtained from 20 g/L of sago hampas was 73.8 mW/cm² with stable cell voltage output of 211.7 mV. The total substrate consumed was 95.1% with the respect of 10.7% coulombic efficiency. The results obtained were almost comparable to the sago hampas hydrolysate with the maximum power density 56.5 mW/cm². These results demonstrate the feasibility of solid biomass to be utilized for the power generation in fuel cells as well as high substrate degradation efficiency. Thus, this approach provides a promising way to exploit sago hampas for bioenergy generation.
Key findings
- Maximum power density of 73.8 mW/cm² was obtained from 20 g/L of sago hampas.
- Stable cell voltage output of 211.7 mV was achieved.
- Total substrate consumed was 95.1% with a coulombic efficiency of 10.7%.
Keywords
Identifiers
- Journal
- Molecules
- Year
- 2019