MESSAI.iO

AI summary

70% confidence

This study explores the potential of microbial fuel cells (MFCs) in treating dairy effluent and generating electricity, with promising results in reducing chemical oxygen demand and producing a high open-circuit voltage. The MFC technology faces challenges such as high cost, low stability, and limited understanding of cell design and operation. Despite these challenges, the study demonstrates the viability of MFCs in wastewater treatment and resource recovery.

Generated by MESSAI extraction pipeline · review against source PDF

Generic MFCRepresentative model
Click to animate flow
loading 3D model…

Representative MFC — matched on the paper’s system type only, not its reactor or geometry.

Extraction

Reported parameters

44 extracted values

View extracted values

Open in lab for full controls, parameter editing, and template overlays.

Open in lab →

What they did

System
MFC

What worked

No outcome metrics extracted yet.

Abstract

Abstract Microbial fuel cells (MFCs) are devices that exploit the electrochemically active microorganisms for the oxidative conversion of organic compounds into electricity. MFC technology is therefore expected to be a viable solution for domestic and industrial wastewater treatment as an alternative to the currently applied activated-sludge process. Despite its potential, the technology is facing application challenges because of high cost, low stability, and limited understanding of cell design and operation. In this experimental study, a double-chambered MFC with graphite electrodes and a proton-conducting membrane is used in a batch mode to study the potential of resource recovery from dairy effluent and identify the process limitations. Results showed a promising cell performance as the chemical oxygen demand of the wastewater reduced from 4520 mg/l to 850 mg/l in 10 days including the time required for biofilm development. The highest open-circuit voltage of 396 mV was recorded on the third day along with the highest power density of 36.39 mW/m 2 corresponding to a current density of 0.30 A/m 2 . Further, the electrochemical impedance spectroscopy revealed that the activation polarization of aerated cathode is the main contributor to cell internal resistance followed by the ohmic resistance.

Key findings

  • The chemical oxygen demand of the wastewater reduced from 4520 mg/l to 850 mg/l in 10 days
  • The highest open-circuit voltage of 396 mV was recorded on the third day
  • The highest power density of 36.39 mW/m² was achieved, corresponding to a current density of 0.30 A/m²

Keywords

EffluentProcess (computing)Biochemical engineeringProcess engineeringWaste management

Identifiers

DOI
10.21203/rs.3.rs-285485/v1
Journal
Research Square
Year
2021