Energy Harvesting from Sugarcane Bagasse Juice using Yeast Microbial Fuel Cell Technology
Marcelinus Christwardana, Linda Aliffia Yoshi, J. Joelianingsih
AI summary
70% confidenceThis study demonstrates the feasibility of producing bioelectricity using yeast microbial fuel cell technology with sugarcane bagasse juice as a substrate.
Generated by MESSAI extraction pipeline · review against source PDF
Representative single-chamber air-cathode MFC — matched on the paper’s reported configuration, not its exact geometry.
Open in lab for full controls, parameter editing, and template overlays.
Open in lab →What they did
- System
- MFC
- Substrate
- complex media
- Inoculum
- Saccharomyces cerevisiae
What worked
No outcome metrics extracted yet.
Abstract
This study demonstrates the feasibility of producing bioelectricity utilizing yeast microbial fuel cell (MFC) technology with sugarcane bagasse juice as a substrate. Yeast Saccharomyces cerevisiae was employed as a bio-catalyst in the production of electrical energy. Sugarcane bagasse juice can be used as a substrate in MFC yeast because of its relatively high sugar content. When yeast was used as a biocatalyst, and Yeast Extract, Peptone, D-Glucose (YPD) Medium was used as a substrate in the MFC in the acclimatization process, current density increased over time to reach 171.43 mA/m² in closed circuit voltage (CCV), maximum power density (MPD) reached 13.38 mW/m² after 21 days of the acclimatization process. When using sugarcane bagasse juice as a substrate, MPD reached 6.44 mW/m² with a sugar concentration of about 5230 ppm. Whereas the sensitivity, maximum current density (Jmax), and apparent Michaelis-Menten constant (𝐾𝑚𝑎𝑝𝑝) from the Michaelis-Menten plot were 0.01474 mA/(m².ppm), 263.76 mA/m², and 13594 ppm, respectively. These results indicate that bioelectricity can be produced from sugarcane bagasse juice by Saccharomyces cerevisiae.Keywords: biomass valorization, biofuel cell, acclimatization, maximum power density, Michaelis-Menten constant
Key findings
- Current density increased to 171.43 mA/m² in closed circuit voltage (CCV) after 21 days of acclimatization.
- Maximum power density (MPD) reached 13.38 mW/m² using YPD Medium as a substrate.
- MPD reached 6.44 mW/m² using sugarcane bagasse juice as a substrate with a sugar concentration of about 5230 ppm.
Keywords
Identifiers
- Journal
- Reaktor
- Year
- 2021