Operation and Electro(chemical) characterization of a microbial fuel cell stack fed with fermentable household waste extract
P Aelterman, K Rabaey, H Pam, N Boon +96
AI summary
70% confidenceTwo microbial fuel cells were stacked and tested under different electrical configurations, with the highest power output obtained under parallel connection.
Generated by MESSAI extraction pipeline · review against source PDF
Representative MFC — matched on the paper’s system type only, not its reactor or geometry.
Open in lab for full controls, parameter editing, and template overlays.
Open in lab →What they did
- System
- MFC
- Substrate
- pure compound
What worked
No outcome metrics extracted yet.
Abstract
Two identical four air-cathode single chamber membrane-less microbial fuel cells were stacked and tested under in series and in parallel electrical configurations. Fermentable household waste extract (FORBI; 0.8 g COD/L) was used as substrate, in all cases. Linear Sweep Voltammetry (LSV) was carried out for the construction of polarization curves which revealed that the highest power ouput (3.88 mW) was obtained under parallel connection as in series connection was found lower due to voltage drop phenomena. Electrochemical Impedance Spectroscopy measurements (EIS) gave an insight in the electrochemical processes occurring within the stack under both electrical connections. The contribution of the individual resistances to the overall internal resistance was defined, designating the significant role of the solution resistance (Rs) and the charge transfer resistance (RCT) under closed circuit conditions.
Key findings
- Highest power output (3.88 mW) was obtained under parallel connection.
- Voltage drop phenomena caused lower power output in series connection.
- Solution resistance (Rs) and charge transfer resistance (RCT) play significant roles in the overall internal resistance.
Keywords
Identifiers
- Journal
- Global NEST Journal
- Year
- 2019