Effect of Influent pH and Hydraulic Retention Time on Bioelectricity Generation in an Integrated Acidogenic Reactor and Microbial Fuel Cell Treating Rice Mill Wastewater

Abstract

Abstract An innovative design approach was employed in the present study to enhance the electricity generation and wastewater treatment in a microbial fuel cell (MFC). A dual-chambered MFC with a ceramic separator was coupled with an acidogenic chamber. Acidogenic bioconversion of rice mill wastewater into volatile fatty acid (VFA) represents an interesting approach for wastewater valorization. The VFA containing effluent could be used as an effective substrate for bioelectricity generation in MFCs. A short hydraulic retention time (HRT) can be used for the two-stage anaerobic process (acidogenesis and electrogenesis), thus preventing the proliferation of methanogens. The effect of pH (5.5–7.5) and HRT (0.5 d⁻⁰.75 d) were investigated to understand the influence of operational parameters on the performance of the integrated system. The maximum VFA concentration of 1065.15 ± 5.08 mg COD/L was achieved at pH 7.5 and HRT 0.5 d. Under these operating conditions, the general activity of acid-forming microorganisms and exoelectrogens improved remarkably, and the power density obtained from the system was 4.72 ± 0.10 W/m 3 . The current research indicates excellent potential for simultaneous treatment and electricity production from rice mill wastewater. The use of low-cost, locally manufactured, and customized membranes and the two-stage treatment can pave the way for the practical application of this technology.

Key findings

• ▸Maximum VFA concentration of 1065.15 ± 5.08 mg COD/L was achieved at pH 7.5 and HRT 0.5 d.
• ▸Power density of 4.72 ± 0.10 W/m³ was obtained under optimal operating conditions.
• ▸Acid-forming microorganisms and exoelectrogens showed improved activity at optimal pH and HRT.

Keywords

Identifiers

DOI

10.21203/rs.3.rs-776224/v1

Journal

Research Square

Year

2021