AI summary

70% confidence

This paper investigates the influence of electrochemically active microorganisms on electron transmission in microbial fuel cells, identifying Escherichia coli -K-12 as the most potent microorganism for MFC operation.

Generated by MESSAI extraction pipeline · review against source PDF

Literature priors

Generic MFCRepresentative model
Click to animate flow
loading 3D model…

Representative MFC — matched on the paper’s system type only, not its reactor or geometry.

Distribution

Reported parameters

The author’s reported value (▼) sits on top of the literature distribution from MESS-Parameters. Values outside the band are flagged as outliers.

Coulombic efficiency4.5%

41 extracted values

View extracted values

Open in lab for full controls, parameter editing, and template overlays.

Open in lab →

What they did

System
MFC

What worked

No outcome metrics extracted yet.

Abstract

This paper focuses on determination of the influence of electrochemically active mi­cro­or­ga­ni­sms on the transmission of electrons from the respiratory enzymes to the electrode and as­sembling of exoelectrogens to the simulated wastewater medium. In this study, the total of eight microorganisms were experimentally tested to exhibit growth and high iron-reducing ability in the absence of mediators. A major connection was observed between the growth and iron-reduction ability of the micro­organism. The growth and iron-reduction ability were monitored experimentally over time. Based on output data, the screening was done among eight different micro­organisms, where Escherichia coli -K-12 was chosen as the most potent micro­organism for its wide application in a microbial fuel cell (MFC). In the present study, various biochemical process factors were optimized statistically using Tagu­chi metho­dology for the rapid development of growth and iron-reducing assay conditions. The design of various experimental trials was carried out using five process factors at three levels with orthogonal arrays (OA) layout of L18. Five process factors, including quantity of lactose, volume of trace element solution, inoculum percentage, pH, and temperature, were taken into consideration as imperative process factors and optimized for evaluation of growth of bacteria and iron reduction ability. The larger-is-best signal to noise (S/N) ratio, together with analysis of variance ANOVA, were used during optimization. Anticipated results demonstrated that the enhanced bacterial growth of 124.50 % and iron reduction ability of 112.6 % can be achieved with 8 g/L of lactose, 2 ml of trace element solution, 4 % (v/v) of inoculum, pH 7, and temperature of 35 °C. Furthermore, the growth and iron reduc­tion time profiles of Escherichia coli-K12 were performed to determine its feasibility in MFC. Open circuit voltage of 0.555 V was obtained over batch study on a single chamber microbial fuel cell (SCMFC).

Key findings

  • Eight microorganisms were tested for growth and iron-reducing ability, with a major connection observed between growth and iron-reduction ability.
  • Escherichia coli -K-12 was chosen as the most potent microorganism due to its wide application in MFCs.
  • Taguchi methodology was used to optimize biochemical process factors for rapid development of growth and iron-reducing assay conditions.

Keywords

Microbial fuel cellMicroorganismEscherichia coliBacterial growthBacteriaFood science

Identifiers

Journal
Journal of Electrochemical Science and Engineering
Year
2021