AI summary

70% confidence

This study investigates the effect of adding vegetable waste on microbial fuel cell (MFC) performance, finding that spinach waste generates the highest power output of 250 mW.

Generated by MESSAI extraction pipeline · review against source PDF

Generic MFCRepresentative model
Click to animate flow
loading 3D model…

Representative MFC — matched on the paper’s system type only, not its reactor or geometry.

Extraction

Reported parameters

34 extracted values

View extracted values

Open in lab for full controls, parameter editing, and template overlays.

Open in lab →

What they did

System
MFC
Substrate
real wastewater

What worked

No outcome metrics extracted yet.

Abstract

Abstract In the past few years the fuel cell has become the centre of attention of the scientific community for the possibility of converting organic waste into electricity directly through redox reactions with the help of bacteria or enzymes. The purpose of this study was to determine the value of MFC performance due to the influence of adding vegetable waste. The soil media used is obtained from agricultural areas. The system used in the MFC is a single chamber of a vessel with a volume of 500 mL. The types of electrodes used are carbon fibres with anode thickness of 0.5 cm and cathode 1.0 cm, as well as anode diameter of 8.0 cm and cathode 8.5 cm. Vegetable wastes were given 5 mg / L each in the MFC single chamber. The results showed that the highest power was generated from a microbial fuel cell with spinach vegetable waste. The power produced is 250 mW (49 mW/cm 2 ). The incubation period for MFC can reach 30 days. Variation of the second rinse with a concentration of 499 ppm will have a pH value having a pretty good linear correlation of 0.9536 to the more electric power generated. The power produced by the MFC 6 series circuit is 1.00 mW, while the power generated by the parallel series is 0.831mW.

Key findings

  • The addition of vegetable waste improves MFC performance, with spinach waste generating the highest power output.
  • The power output of the MFC is correlated with the pH value of the solution, with a linear correlation coefficient of 0.9536.
  • The incubation period for MFC can reach 30 days, and the power output is affected by the concentration of the rinse solution.

Keywords

Microbial fuel cellAnodeCathodePulp and paper industryElectrodeCarbon fibers

Identifiers

Journal
Journal of Physics: Conference Series
Year
2021