Comparison of Electrode Reduction Activities of Geobacter sulfurreducens and an Enriched Consortium in an Air-Cathode Microbial Fuel Cell
Shun'ichi Ishii, Kazuya Watanabe, Soichi Yabuki, Bruce E. Logan +1
AI summary
70% confidenceThis MFC study ABSTRACT An electricity-generating bacterium, Geobacter sulfurreducens PCA, was inoculated into a single-chamber, air-cathode microbial fuel cell (MFC) in order to determine the maximum electron transfer rate from bacteria to the anode. To create anodic reaction-limiting conditions, where electron transfer from bacteria to the anode is the rate-limiting step, anodes with electrogenic biofilms were reduced in size and tests were conducted using anodes of six different sizes.
Generated by MESSAI extraction pipeline · review against source PDF
Representative MFC — matched on the paper’s system type only, not its reactor or geometry.
Open in lab for full controls, parameter editing, and template overlays.
Open in lab →What they did
- System
- MFC
What worked
No outcome metrics extracted yet.
Abstract
ABSTRACT An electricity-generating bacterium, Geobacter sulfurreducens PCA, was inoculated into a single-chamber, air-cathode microbial fuel cell (MFC) in order to determine the maximum electron transfer rate from bacteria to the anode. To create anodic reaction-limiting conditions, where electron transfer from bacteria to the anode is the rate-limiting step, anodes with electrogenic biofilms were reduced in size and tests were conducted using anodes of six different sizes. The smallest anode (7 cm 2 , or 1.5 times larger than the cathode) achieved an anodic reaction-limiting condition as a result of a limited mass of bacteria on the electrode. Under these conditions, the limiting current density reached a maximum of 1,530 mA/m 2 , and power density reached a maximum of 461 mW/m 2 . Per-biomass efficiency of the electron transfer rate was constant at 32 fmol cell −1 day −1 (178 μmol g of protein −1 min −1 ), a rate comparable to that with solid iron as the electron acceptor but lower than rates achieved with fumarate or soluble iron. In comparison, an enriched electricity-generating consortium reached 374 μmol g of protein −1 min −1 under the same conditions, suggesting that the consortium had a much greater capacity for electrode reduction. These results demonstrate that per-biomass electrode reduction rates (calculated by current density and biomass density on the anode) can be used to help make better comparisons of electrogenic activity in MFCs.
Key findings
- 5 times larger than the cathode) achieved an anodic reaction-limiting condition as a result of a limited mass of bacteria on the electrode.
- Under these conditions, the limiting current density reached a maximum of 1,530 mA/m², and power density reached a maximum of 461 mW/m².
- Per-biomass efficiency of the electron transfer rate was constant at 32 fmol cell⁻¹ day⁻¹ (178 μmol g of protein⁻¹ min⁻¹), a rate comparable to that with solid iron as the electron acceptor but lower than rates achieved with fumarate or soluble iron.
- In comparison, an enriched electricity-generating consortium reached 374 μmol g of protein⁻¹ min⁻¹ under the same conditions, suggesting that the consortium had a much greater capacity for electrode reduction.
Keywords
Identifiers
- Journal
- Applied and Environmental Microbiology
- Year
- 2008