MESSAI.iO

AI summary

75% confidence

This MEC study Fused Deposition Modelling (FDM), one of the most widely used methods of Additive Manufacturing Technique known as 3D Printing, is a popular technique used to produce different engineering components using common engineering polymers. PLA filament, a synthetic polymer derived from corn starch, is generally used in production with the FDM.

Generated by MESSAI extraction pipeline · review against source PDF

Generic MECRepresentative model
Click to animate flow
loading 3D model…

Representative MEC — matched on the paper’s system type only, not its reactor or geometry.

Extraction

Reported parameters

45 extracted values

View extracted values

Open in lab for full controls, parameter editing, and template overlays.

Open in lab →

What they did

System
MEC

What worked

No outcome metrics extracted yet.

Abstract

Fused Deposition Modelling (FDM), one of the most widely used methods of Additive Manufacturing Technique known as 3D Printing, is a popular technique used to produce different engineering components using common engineering polymers. PLA filament, a synthetic polymer derived from corn starch, is generally used in production with the FDM. Although PLA material is recyclable and biodegradable, its carbon emission is not zero. One of the filament types developed to produce more sustainable products is Wood PLA filament materials. This study presents an experimental study examining the effect of printing parameters on the mechanical properties of components produced with Wood PLA filaments. The effects of the printing parameters determined as infill pattern, infill density and nozzle temperature on the mechanical strength parameter determined as tensile strength and bending strength of PLA Wood samples produced in standard sizes were investigated experimentally. The experimental design was carried out in accordance with the Taguchi L9 orthogonal array, and the relationship between the printing parameters and the mechanical strength parameters was modelled mathematically. The estimated strength values calculated using mathematical models were compared with the experimental test results. The results showed that the tensile strength and flexural strength values were directly proportional to the infill density. Experiments have shown that the most effective 3D printing parameter on the mechanical strength parameters is the infill density parameter with a contribution ratio of 63.09% for tensile strength and 73.83% for flexural strength.

Key findings

  • The results showed that the tensile strength and flexural strength values were directly proportional to the infill density.
  • 09% for tensile strength and 73.
  • 83% for flexural strength.

Keywords

Ultimate tensile strengthFlexural strengthInfillComposite materialTaguchi methodsFused deposition modeling

Identifiers

DOI
10.46519/ij3dptdi.1231076
Journal
International Journal of 3D Printing Technologies and Digital Industry
Year
2023