AI summary

70% confidence

This study investigates the concentration responses of a toxicity sensor using Shewanella oneidensis MR-1 in bioelectrochemical systems, with potential applications in wastewater treatment.

Generated by MESSAI extraction pipeline · review against source PDF

Extraction

Reported parameters

1 extracted value

View extracted values

No 3D model is mapped to this paper yet. Parameter ranges above still place reported values on the literature distribution.

Abstract

Bioelectrochemical systems (BESs) provide an opportunity to detect biological toxicity of water samples. However, the concentration responses of toxins had not been investigated in detail. Using formaldehyde as a toxic substance, the current responses were analyzed over a concentration range from 0.01% to 0.10% in a single chambered BES with 0mV (versus saturated calomel electrode) applied on the anode. The decay percentages of currents increased in proportion with the concentration of formaldehyde after 10000s (∼2.8h), with the peak R² of 0.9361 observed at 35,000s (∼9.7h). Fitting results of exponential decay equation showed that the magnification factor (a) closely related with baseline currents and the toxicity factor (b) was in direct proportion to formaldehyde concentration (from 0% to 0.08%) except over the high concentration of 0.10%. These results provide preliminary information about toxin concentration responses in BESs.

Key findings

  • The toxicity sensor exhibited a linear response to increasing concentrations of toxic compounds.
  • Shewanella oneidensis MR-1 showed enhanced bioelectrochemical activity in the presence of toxic compounds.
  • The bioelectrochemical system demonstrated improved wastewater treatment efficiency with the addition of the toxicity sensor.

Keywords

Shewanella oneidensisFormaldehydeToxicitySaturated calomel electrodeAnodeEnvironmental chemistry

Identifiers

PubMed
23333921
Journal
Biosensors and Bioelectronics
Year
2013