Resourceful Treatment of Dioscorea zingiberensis Wastewater Using a Double-Chamber Microbial Fuel Cell
Hui Li, Zheng Fang
AI summary
80% confidenceA double-chamber microbial fuel cell (MFC) was used to dispose Dioscorea Zingiberensis wastewater and retrieve electrical energy. Both electrical performance and contaminant degradation characteristics were investigated.
Generated by MESSAI extraction pipeline · review against source PDF
Literature priors
Representative MFC — matched on the paper’s system type only, not its reactor or geometry.
Reported parameters
The author’s reported value (▼) sits on top of the literature distribution from MESS-Parameters. Values outside the band are flagged as outliers.
3 extracted values
View extracted valuesOpen in lab for full controls, parameter editing, and template overlays.
Open in lab →What they did
- System
- MFC
What worked
No outcome metrics extracted yet.
Abstract
A double-chamber microbial fuel cell (MFC) was used to dispose Dioscorea Zingiberensis wastewater and retrieve electrical energy. Both electrical performance and contaminant degradation characteristics were investigated. The potential of the MFC achieved 0.50-0.55 V over a 1000 ohm resistance, and the Coulombic efficiency was 7.01% or so. The maximum power density was about 350 mW/m². During the operation cycle, COD was removed 82.6% and 10.9% in the anodic and cathodic chamber, respectively. In anodic chamber, simple acid, sugars and cellulose in wastewater were utilized while complicated organic matters including furanic and aromatic compounds were broken down by breaking side-chains and opening rings. In cathodic chamber, fatty ester and alkene were removed while aromatic compounds were degraded further. The results indicate that MFC provides a new approach for resource recovery treatment of Dioscorea Zingiberensis wastewater.
Key findings
- The potential of the MFC achieved 0.
- 01% or so.
- The maximum power density was about 350 mW/m².
- 6% and 10.
- 9% in the anodic and cathodic chamber, respectively.
Keywords
Identifiers
- Journal
- Advanced Materials Research
- Year
- 2012