MESSAI.iO

AI summary

70% confidence

AbstractThe performance of a prototype up‐flow single‐chambered microbial fuel cell (MFC) for electrical power generation using brewery wastewater as fuel is reported. The designed reactor consisted of three zones, namely a lower anaerobic digestion zone, a central MFC zone, and an upper effluent clarifier zone.

Generated by MESSAI extraction pipeline · review against source PDF

Generic MFCRepresentative model
Click to animate flow
loading 3D model…

Representative MFC — matched on the paper’s system type only, not its reactor or geometry.

Extraction

Reported parameters

6 extracted values

View extracted values

Open in lab for full controls, parameter editing, and template overlays.

Open in lab →

What they did

System
MFC

What worked

No outcome metrics extracted yet.

Abstract

AbstractThe performance of a prototype up‐flow single‐chambered microbial fuel cell (MFC) for electrical power generation using brewery wastewater as fuel is reported. The designed reactor consisted of three zones, namely a lower anaerobic digestion zone, a central MFC zone, and an upper effluent clarifier zone. Tests were conducted in batch mode using a beer wastewater as the fuel/electron donor (COD concentration: 430 mg/L) and mixed consortia (both sewage microflora and anaerobic sludge) as a source of electrogenic bacteria. A stable current density of ∼2,270 mA/m² was generated under continuous polarization with a constant external resistance (0.01 kΩ) and cell polarization gave a peak power density of 330 mW/m² at a current density of 1,680 mA/m². Electrochemical impedance analysis showed that the overall internal resistance of the reactor was quite low, that is, 8.0 Ω. Cyclic voltammetric analysis of the anodic biofilm at low scan rate revealed quite complex processes at the anode, with three redox peaks, at potentials of 116, 214, and 319 mV (vs. NHE). Biotechnol. Bioeng. 2010;107: 52–58. © 2010 Wiley Periodicals, Inc.

Key findings

  • A stable current density of ∼2,270 mA/m² was generated under continuous polarization with a constant external resistance (0.
  • 01 kΩ) and cell polarization gave a peak power density of 330 mW/m² at a current density of 1,680 mA/m².
  • Electrochemical impedance analysis showed that the overall internal resistance of the reactor was quite low, that is, 8.
  • © 2010 Wiley Periodicals, Inc.

Keywords

Microbial fuel cellWastewaterElectricityElectricity generationWaste managementSewage treatment

Identifiers

DOI
10.1002/bit.22778
Journal
Biotechnology and Bioengineering
Year
2010