MESSAI.iO

AI summary

70% confidence

This MFC study abstract In this study, an algae-assisted microbial fuel cell (MFC) was developed to both treat horse manure wastewater and generate electricity. Carbon felt (CF) and graphite felt (GF) electrodes were modified with carbon nanotube (MWCNT) and nitric acid (HNO₃) to prepare different anodes and their effects on MFC performance were evaluated.

Generated by MESSAI extraction pipeline · review against source PDF

Generic MFCRepresentative model
Click to animate flow
loading 3D model…

Representative MFC — matched on the paper’s system type only, not its reactor or geometry.

Extraction

Reported parameters

105 extracted values

View extracted values

Open in lab for full controls, parameter editing, and template overlays.

Open in lab →

What they did

System
MFC
Substrate
real wastewater

What worked

No outcome metrics extracted yet.

Abstract

Abstract In this study, an algae-assisted microbial fuel cell (MFC) was developed to both treat horse manure wastewater and generate electricity. Carbon felt (CF) and graphite felt (GF) electrodes were modified with carbon nanotube (MWCNT) and nitric acid (HNO₃) to prepare different anodes and their effects on MFC performance were evaluated. The power density of 59 mW/m² obtained with the CF-HNO₃ anode showed the highest value among all tested systems and was found to be 2.45 and 2.13 times higher than unmodified CF and GF anodes, respectively. Moreover, a 17% higher performance was achieved compared to the GF-HNO₃ anode. The higher performance of CF-HNO₃ compared to GF-HNO₃ can be attributed to the higher surface area of the carbon felt, improved proton conduction, and increased electrochemical activity after treatment with nitric acid. The modified CF-MWCNT and GF-MWCNT anodes produced power densities of 55 mW/m² and 45 mW/m², respectively. The Coulombic efficiency (CE) values obtained were in line with these results. The results reveal that nitric acid modification significantly increases the power output of MFCs by providing accelerated electron transfer on biofilms. This simple and effective method offers a new approach to develop low-cost and high-performance electrode materials for MFCs. Moreover, the analysis of algal biomass from the cathode chamber is in line with the existing literature and makes an important contribution towards sustainable energy solutions. The study stands out as a promising step towards the scalability and commercialization of MFCs. Furthermore, the findings can contribute to economic feasibility through low-cost modification techniques and support environmental sustainability. The findings contribute to economic feasibility and support environmental sustainability through low-cost modification techniques. Future studies can support the wider adoption of MFCs for industrial applications by investigating the effects of these modifications on long-term performance and compatibility with different wastewater types. This could accelerate the transition to sustainable energy solutions by promoting the wider use of MFCs in power generation and wastewater treatment.

Key findings

  • The power density of 59 mW/m² obtained with the CF-HNO₃ anode showed the highest value among all tested systems and was found to be 2.
  • 45 and 2.
  • Moreover, a 17% higher performance was achieved compared to the GF-HNO₃ anode.
  • The higher performance of CF-HNO₃ compared to GF-HNO₃ can be attributed to the higher surface area of the carbon felt, improved proton conduction, and increased electrochemical activity after treatment with nitric acid.
  • The modified CF-MWCNT and GF-MWCNT anodes produced power densities of 55 mW/m² and 45 mW/m², respectively.

Keywords

Microbial fuel cellAlgaeAnodeElectricity generationBiochemical engineeringPulp and paper industry

Identifiers

DOI
10.1007/s13399-025-06536-2
Journal
Biomass Conversion and Biorefinery
Year
2025